Hello Guys! I have trouble with my car radio Kenwood KDC 3051G I hope someone more knowledgeable can help me, I tried everything in my power that I stumbled upon online.
My radio is permanently in demo mode, it says Press Volume Knot Cancel Demo and when I press it nothing happens.
- Tried to unplug radio and plug it back in into power,
- Tried to reset radio by holding reset button key for 5,10,30 seconds while in power and without power, plugging it back in, it wouldn't work.
- Tried to hold 3,6 while turning it back on and then pressing 1,2...
No content found
Please log in to your account to view your subscribed posts.
| Directory | Topics | Posts | Last Post | |||
|---|---|---|---|---|---|---|
| Badcaps Capacitor & Electronics Repair Forum | ||||||
|
Frequently Asked Questions (No Posting)
All new members, PLEASE READ HERE FIRST! Posting only allowed by established members.
Topics: 45
Posts: 733
|
45 | 733 |
|
|||
|
Announcements & Related News
Site announcements, capacitor-related news, and anything relavant you might think of... Got News? POST IT!!
Topics: 236
Posts: 42,293
|
236 | 42,293 |
|
|||
| Document & Software Archive | ||||||
|
Common Parts Library - Datasheets
Share or download datasheets or application notes for electronic components and other parts. Contribute your knowledge or ask questions. Before using please read our Terms of Service.
Topics: 1
Posts: 4
Last Post:
ncp81208 datasheet
|
1 | 4 |
|
|||
| General Topics | ||||||
|
General Capacitor Questions & Issues
Questions and answers for identifying whether your device has bad capacitors. Also post general capacitor-related questions and issues here.
Topics: 3,190
Posts: 32,713
|
3,190 | 32,713 |
05-20-2024, 08:05 PM
|
|||
|
General Computer & Tech Discussion
Have just a general computer question, post it here. This can be anything from an OS issue, hardware issue not related to capacitors, upgrade question, or whatever basic tech-related issue is on your mind.... This is also a good place to share your tech projects!
Topics: 4,502
Posts: 74,875
Last Post:
Looking for info on Realtek RTD2132 ic
|
4,502 | 74,875 |
|
|||
| Troubleshooting Hardware & Devices and Electronics Theory | ||||||
|
General Electronics Technical Discussion
If you have a general question concerning basic electronics theory or component function & usage, here's where it goes.
Topics: 3,984
Posts: 44,458
Last Post:
opto something Liteon 816A4
|
3,984 | 44,458 |
|
|||
|
Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
Technical discussions covering any type of desktop motherboard, video/graphics card, controller card, or whatever other desktop peripheral you need help with. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 6,866
Posts: 37,555
Last Post:
Graphics card Schematics and Boardviews
|
6,866 | 37,555 |
|
|||
|
Sub-Forums:
| ||||||
|
Troubleshooting & Designing Networks
Post your computer network questions, ideas, gripes, and so on in here. This can be any type of network, whether its cabled, wireless, or whatever. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 501
Posts: 5,455
|
501 | 5,455 |
|
|||
|
Troubleshooting Laptops, Tablets, and Mobile Devices
Technical discussions covering any type of laptop, notebook, netbook, tablet, or smartphone. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 32,142
Posts: 307,306
Last Post:
DA00PDMB8E0 Rev:E schematic and boardview
|
32,142 | 307,306 |
|
|||
|
Sub-Forums:
| ||||||
|
Troubleshooting Computer Displays
Technical discussions covering any type of PC/computer display, whether it be CRT, LCD, or anything else. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 5,329
Posts: 75,732
|
5,329 | 75,732 | ||||
|
Troubleshooting TVs and Video Sources
Technical questions about your defective television, projection screen, LCD/plasma, or any other type of video device. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 27,486
Posts: 375,148
Last Post:
LG 43UJ701 (EAX67166104) kapanıp açılıyor,
|
27,486 | 375,148 |
|
|||
|
Troubleshooting Power Supplies and Power Supply Design
Technical discussion for power supplies. This covers PC supplies, and any other related power supply issue. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 4,190
Posts: 65,294
Last Post:
Welder not turning on - Learning
|
4,190 | 65,294 |
|
|||
|
Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
Technical questions about your defective laser or ink printer, plotter, copier, scanner, and other imaging & printing devices. This section also includes digital cameras. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 304
Posts: 1,675
|
304 | 1,675 |
|
|||
|
Troubleshooting Audio Equipment
Technical discussion on audio equipment troubleshooting and installation. This can be anything from a home/car stereo, guitar amp, and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 2,338
Posts: 27,573
|
2,338 | 27,573 |
|
|||
|
Troubleshooting Appliances and other Household Electronic Stuff
Technical discussion on household appliances & other household electrics & electronics; including troubleshooting and installation. This can be anything from a washer/dryer, dishwasher, microwave oven, other sordid kitchen electrics and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 226
Posts: 3,951
Last Post:
BOSCH Microwave CFA634 error E1006
|
226 | 3,951 |
|
|||
|
Troubleshooting Game Consoles & Other Weird Devices
This can be anything from game consoles to arcade games to anything else that doesn't really fit into any of the above categories. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 1,008
Posts: 10,918
|
1,008 | 10,918 |
|
|||
|
Equipment Usage, Soldering, Techniques, and Reviews
Technical discussions concerning soldering techniques, usage of test equipment, how it works, what's best, and some pointers in using it all.
Topics: 1,381
Posts: 19,460
|
1,381 | 19,460 |
|
|||
-
-
Hey all
I have a set of FE buds, the right side will not connect, I don’t believe it is even charging..I am able to connect and get audio through the left, the case appears to charge itself and the left correctly.
The left has ~1.3v between the pins, the right side has ~-0.7v ..
This is wonky, surely? My assumption would at least be the same charging voltage, even if the..
can someone confirm that the earbuds polarity is different?
I may try and inject 1.3v onto the charging pads of the right, if it will take even a little charge...Today, 11:13 AM -
I can see the image in the background with a flashlight. I have 260V on LED+ and 90V on LED -. The backlights were acting weird with my tester so I pulled the panel and one LED does take about 2 seconds before it lights up but thats it. Is the voltage at the LED connector correct?...05-11-2024, 08:25 PM
-
Hello guys, i am working on a X512FF motherboard that comes dead, 19V stops on first mosfet, Gate only have 3v... if a make a bypass laptops works great with no problem... already tested the 5 mosfets, if i remove the current sensor PRS8901, the 19v appear...
Something with the 19V line and the charger detects and stop working !
Any advices ?...05-09-2024, 08:30 AM -
I bought a T12-958 recently with an M8 handle and until now it has worked very well. The tip wasn't earthed but that was easily resolved.
Now, whenever it is switched on, it heats up to about 70*C then shows an [INVER] error on the screen and stops. In order to fix it I have to either unplug and re-plug the handle, or unplug and re-insert the tip from the handle. While doing that it changes to [ERROR], then it finishes heating up and works perfectly. Until it's turned off, after which it will show [INVER] again next time it is turned on.
Any idea what the problem is?05-06-2024, 01:36 PM -
Need schematic or board view
GDS70 LA-K472P DELL ALIENWARE X17 R1
thankYesterday, 05:53 AM -
Hi
i need schematic for Samsung BN44-00757a power board.
TV model: UE48H5003
Thank YouToday, 11:27 AM -
I have an Asus G14 (GA401QM) that has a power issue. Originally the board had a shorted 5V rail and dead EC. I reballed a working EC, soldered it on, and I resolved the 5V issue by replacing the APL6012 and the low side 5V mosfet. Resistances on all power rails are healthy now, but 20V does not make it through the first MOSFET. 20V is present on the drain of the first MOSFET, but there is no voltage on the gate or source.
When diagnosing this issue, I thought that the issue was due to the BQ24800 chip not outputting the correct signals so I soldered on a known working chip and the...05-08-2024, 01:30 PM -
Hey, I'm repairing a board from liquid damaged laptop, managed to get 5V and 3.3V rails up, some passives were corroded away. Only problem right now is no reaction to power button, there is no PCH_PWR_EN signal, DPWROK_EC is 2.5V, +1.0VALW is missing. Replaced KBC with brand new one, reprogrammed. No change. Any ideas? Schematic and boardview are available, attached them at the bottom. Boardview file can be opened by "BoardViewer" software.
Please don't mind the damage near UC4, it was caused by liquid damage and there is battery connector on the other side,...Today, 11:10 AM -
Hi,
I have an HP 255 G8 that runs for as long as its battery holds charge but won't accept AC power.
I have partially diagnosed the problem and the issue seems to be that there is no ACDRV output from the BQ24735 to turn on the two input MOSFETs. The 24735 has a VCC of 19.57 V, the ACDET input is at 2.93 V and the REGN 6V LDO is outputting 5.98 V, so everything looks good - but ACDRV is stuck at 28 mV.
I've already replaced the 24735 and both input MOSFETs and nothing has changed.
I'd appreciate some suiggestions as to what to try next.05-20-2024, 08:45 AM
-
Hey all
I have a set of FE buds, the right side will not connect, I don’t believe it is even charging..I am able to connect and get audio through the left, the case appears to charge itself and the left correctly.
The left has ~1.3v between the pins, the right side has ~-0.7v ..
This is wonky, surely? My assumption would at least be the same charging voltage, even if the..
can someone confirm that the earbuds polarity is different?
I may try and inject 1.3v onto the charging pads of the right, if it will take even a little charge...Today, 11:13 AM -
I need ds-7104hghi-k1 80388 firmware
my attached bios is password protectedToday, 08:42 AM -
Good afternoon,
I'd appreciate help diagnosing my A2442 that's only taking 5v and 0a
This was my personal laptop and I had closed it at the end of a class and opened it in the next class when it just didn't wake up from sleep (The battery was charged). I connected a charger later that night and it booted right up but touch ID stopped working. The next day it did the same thing but never turned back on when I plugged in a charger.
I though the touch ID issue was weird but I'm not sure if that info helps.
When this happened months ago I tried to diagnose...Yesterday, 07:56 PM -
Well hi to all
The big question: Is there any hope?😎
I think about 36 hours ago I begin my journey to find a solution for my pc model with no luck.
BCU: Access denied
Efi Shell: Hp Protocol Something etc..
I am not that experience, "but I can fight my way through"
What to do guys?
To be or not to be is not the question anymore.Today, 10:02 AM -
Hello Guys! I have trouble with my car radio Kenwood KDC 3051G I hope someone more knowledgeable can help me, I tried everything in my power that I stumbled upon online.
My radio is permanently in demo mode, it says Press Volume Knot Cancel Demo and when I press it nothing happens.
- Tried to unplug radio and plug it back in into power,
- Tried to reset radio by holding reset button key for 5,10,30 seconds while in power and without power, plugging it back in, it wouldn't work.
- Tried to hold 3,6 while turning it back on and then pressing 1,2...Today, 01:27 PM -
Hi
i need schematic for Samsung BN44-00757a power board.
TV model: UE48H5003
Thank YouToday, 11:27 AM -
Hello everyone.
Here is the bypass solution for several Lenovo ECs.
This has worked on many ECs.
Only works if password is contained in EC
I succeeded on many models
[URL="https://www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-laptops-tablets-and-mobile-devices/bios-requests-only/104872-lenovo-l15-gen-2-ryzen-password-removal-w-vertyanov-successor?p=3217086#post3217086"]https://www.badcaps.net/forum/troubl...86#post3217086[/URL]
[URL="https://www.youtube.com/channel/UCeF58jC2Bt_adKcguvynjeA"]https://www.youtube.com/channel/UCeF...t_adKcguvynjeA[/URL]...03-17-2024, 11:57 AM -
Hey, I'm repairing a board from liquid damaged laptop, managed to get 5V and 3.3V rails up, some passives were corroded away. Only problem right now is no reaction to power button, there is no PCH_PWR_EN signal, DPWROK_EC is 2.5V, +1.0VALW is missing. Replaced KBC with brand new one, reprogrammed. No change. Any ideas? Schematic and boardview are available, attached them at the bottom. Boardview file can be opened by "BoardViewer" software.
Please don't mind the damage near UC4, it was caused by liquid damage and there is battery connector on the other side,...Today, 11:10 AM -
Hi everyone!
Hope you're all having a great day, and thank you very much for stopping by and taking the time to read this post to help me with my parents' Samsung TV.
My issue: No backlight.
Model: QE82Q70RAT
Type No: QE82Q70RAT
The TV was already serviced by Samsung once under warranty for the exact same issue, but six months after the fix, the backlight went out again. Now, Samsung is asking for nearly the same price as a brand new TV to fix this with the same 6-month guarantee.
So hopefully, I can fix this cheaper.
...Yesterday, 06:56 AM -
Hello,
I accidentally flashed the wrong firmware to my Lenovo Laptop Touchscreen. Now it is not recognized anymore in Windows 10. With Linux, I get the Device Listed as ELAN 04f3:000b USB device. I have modified the original Lenovo Flash Tool and tried other Firmware bin files but without success.
The screen is the WHQD version. Can anyone provide a firmware bin file to reflash the touchscreen controller? As it seems that the controller is in recovery mode.
Thanks in advanceToday, 08:04 AM