Board: DAG3MCMBAE 0 REV E
HP VICTUS 16-D1001NP...
Luís Amaral
Senior Member
Last Activity: Today, 01:23 PM
Joined: 11-13-2013
Location: Almada
-
DAG3MCMBAE Schematic
Hi, i cant seem to find what is this componnent, its says "eHEAK"
Board: DAG3MCMBAE 0 REV E
HP VICTUS 16-D1001NP... -
Did you solve the problem ?... -
Hello i have the same problem already done BIOS and replace KBC from my older motherboard and same problem... any solution for this ????...Leave a comment:
-
Hello, i have similar problem on this motherboard. ACDRV is 2-3V, if a make a bypass on fist mosfet motherboard woks fine, charger and mosfets replaced, REGN OK, ACDET OK,... anyone can explain what can i do more on this cases ???...Leave a comment:
-
Asus S510U
Hello, i´m working on a Asus that have a strange issue... arrived to my store with a damaged battery connector, client open it and damaged the connector, already solder but now the laptop works fine but only charge the battery in this particle case:
Laptop off plug the charge battery start charging and i can turn on and still charging, if i remove the charge and put the charge again battery will not charge... i have to shutdown the laptop remove the charge and plug it again...
Already check the mosfets and replaced the BQ24780S, the motherboard is a X510UN, AC detect... -
This motherboard is a CPU Killer...Leave a comment:
-
Asus X571GT - DA0XKTMB8C0
Hello, I have this equipment on bench Asus X571GT and it's driving me crazy, the problem is when it enters the operating system it turns off! I've already reprogrammed the BIOS, tested the software, just connected the motherboard with a USB disk and it does the same, I've already changed the charger IC... with the thermal camera I don't see anything heating up.... I've already disabled the dedicated graphics and it does the same... I don't know what to do anymore!
Any tips guys ?... -
i solved the problem, it was one of the battery mosfets
Leave a comment:
-
No one ? any tip ?...Leave a comment:
-
Asus X512FF
Hello guys, i am working on a X512FF motherboard that comes dead, 19V stops on first mosfet, Gate only have 3v... if a make a bypass laptops works great with no problem... already tested the 5 mosfets, if i remove the current sensor PRS8901, the 19v appear...
Something with the 19V line and the charger detects and stop working !
Any advices ?... -
?Leave a comment:
-
Turn on 100ma and no image, maybe U2901 problem, help will be appreciated.Leave a comment:
-
Leave a comment:
-
Asus a560ud
Hello guys, I receive lots of A560ud for repair, but normally the issue is always the same, waterdamage near clock, but some still turn on and no image, 100ma of consume, anyone have experience with this issue ?
Luis Amaral... -
Ip3_in6_mb_v11_20200721a
Hello anyone have this bios please ?
IP3_IN6_MB_V11_20200721A
Luís Amaral -
Re: Component Identification Clevo Barebone WH1-140P
Hello, anyone have this bios please ?Leave a comment:
-
Re: Hp 15-bw069sa la-e841p
Try with two pair of rams !Leave a comment:
-
Re: Hp 15-bw069sa la-e841p
EC problem
Leave a comment:
-
Re: Asus uX390U
lcd problem !
Leave a comment:
-
Asus uX390U
Hello Everybody! Need your all advice.
The problem is:
ASUS Zenbook UX390U show the White screen when I turn on.
[url]https://www.picz.in.th/image/x7iTTy[/url]
Already order it 2 LCDS and same problem
Any ideias ?
Luís Amaralhttps://Hello Everybody! Need your a...deias ? <br />
No activity results to display
Leave a comment: