Hellow guys,
Does anyone has boardview or schematic of this graphics card? Or something that is more or less the same?
Thanks for your time.
dreico33
Member
Last Activity: 04-08-2025, 07:29 AM
Joined: 05-03-2018
Location: La Paz
-
Pny 3060 Ti 8GB XRL 8 Boardview or Schematic
-
Thank you fot your responce. I am getting anything between 75-99 Degrees C, just for normal user, (Office, Browsing , Windows Update Etc), and yes i have cpu throttling at some point. The weird thing is i get that temp 15 20 30 min or even more after i turn on the laptop.
For example the laptop its on for about 10 min now and the temps are stable at 42 , 43 degrees C ( idle). The radiator while i was cleaning it i noticed discoloration on it.Also when i connect the charger temp goes higher. -
Hp 15 with a i5-10210u procesor reaches 95 grados C. Is there any chance to undervolt,?
Hellow guys,
I have an Hp 15 i5 10210u with heat issues even after a complete cleanup on its collling assy. So i dont know of there isn any chance to undervolt ( and how )it in order to drop down its temp.
Thank you for your time. -
Charger IC And 3 - 5 v Powersupply.
Hellow everyone,
I just have some questions regarding to these IC's. When we are changing 3 -5 V power supply do we need also to change Upper and Lower Mosfet? Or the output Capacitor (No idea which is this cap). The same goes for the Charger Chip. Do we need to change also the Mosfets?
Thank you very much. -
Hellow, i did all the measurements. On-Board -> Source to Drain 25.2 K Ohms
Gate to Source -> 5 M Ohms
Gate to Dain --> 6 M Ohms
Outside of the board all measurements are on the Scale of M Ohms,
So i guess its not the Mosfet, I also replace it with a 7401 P - Channel same results.
Anyway now with the thermal cam seems to have problem the 3-5 V power supply. Rabit Hole i guess.
Thank you very much for your help.Leave a comment:
-
According to its Datasheet its P-Channel 30 V. This is the second mosfet in the DC-In Section . The First is a 7401. So if i can not find 7403, i DO have 7401 to replace! Think it will work?Leave a comment:
-
AON7403 Mosfet Equivalent
Hellow guys,
I am trying to replace an AON7403 Mosfet but i dot not have in my stock the same. So i wonder if there is any equivalent to this Mosfet.
Thank you very much. -
Ok, will replace the mosfet.Thank you very much for your help.Leave a comment:
-
Thank you for your response,
You think the N-Mosfet is the problem?...Leave a comment:
-
Dell Latitude 14 Rugged 7414 Message " AC power adapter wattage and type cannot be determined.".
Ηellow guys, i have this laptop on my hands with this common error. I have search and found the schematic and i have done some measurements about PS_ID , and i would like to share it with you. Please any help would be very apreciated.
*** Note that i have a Smd Resistance that supposes to be 100 K according to Schematic but it only shows me 25.20 K. ***
Thank you.
[ATTACH=JSON]{"data-align":"none","data-size":"large","data-attachmentid":3503231}[/ATTACH]... -
TL866 II Plus Check ID Error on various IC
Hellow guys , i really need your help here.
Lately i have a problem with My TL 866 II Plus programmer, and to be more specific many times on various IC ( Winbond, Gigadevice Mx) i get Check ID Error while i am trying to read the IC. Has already been detected without any kind of problem, but the only to read them is to uncheck every time the "Check ID " option. After that i can read it erase it and re-program it only to get another error at then end saying that can not verify the programing went well so i have program failed. So i am trying to find out what is going on? I... -
You are right bro thank you very much....Leave a comment:
-
Bga Stencil set and base? ,for Vram reballing.
Hellow guys,
I am looking for a good set of stencils and bases(dont kbow exacly the word) for vram exclusive bga reballing.
Your recomendations are very welcome
Thank you. -
Ok, i will order the cable and post for the results as soon as i have them, thank you very much.Leave a comment:
-
Thank you for your responce.No am not sure 100% that is gonna work, i am just tired every time desolder the bios Chip, apply hot air, cover with kapton tape or aliminium tape the plastic parts arround the Ic etc. This process with the jspi1 header seems much more simple and less time consuming....Leave a comment:
-
i Need something like that ..> [URL="https://www.aliexpress.us/item/3256802087726860.html?spm=a2g0o.productlist.main.25.2960m0Fcm0FcEk&algo_pvid=984e0b06-fd95-41a1-94f2-375dc9d19102&algo_exp_id=984e0b06-fd95-41a1-94f2-375dc9d19102-12&pdp_npi=4%40dis%21USD%2115.90%2112.24%21%21%2115.90%2112.24%21%402140fc6317266760924903564ebffd%2112000019867616184%21sea%21US%212759458970%21X&curPageLogUid=I7VWneBRrXKN&utparam-url=scene%3Asearch%7Cquery_from%3A"]JSPI1 Burner Programmer MSI motherboard BIOS Fresh Chip Burning for MSI Motherboard Fresh MSI JSPI1 Hot Swap Cable - AliExpress...Leave a comment:
-
it accually has 9 pin but is uses the 8 pins. I need a cable that is 8 pin and goes from the jspi1 directly to the programmer. Whas you showed is clip yes but for me at least is very difficult to use it. So i i need female to female 8 pin cable. So far i can only find 10 pin or 12,Leave a comment:
-
Looking for 9 pin jspi1 cable.
Hellow guys, as the title says i am looking for a 9 pin cable to conect my programmer ( Tl866ii plus) with the mb without the need to take out the bios chip in order to read it or re-program it. So far i can find cables for 10 pin jspi1 header or for 12 pin, which are not compatible. Maybe i am typing it wrong, so if you give me a hand with some links or under which name i have to look for it would ne very helpul. Thank you very much for your time. [ATTACH=JSON]{"data-align":"none","data-size":"medium","data-attachmentid":3463547}[/ATTACH]...
-
130 Ohms Aprox. ( Memory Inductor and caps)....Leave a comment:
-
Asus Strix 1060 GTX NO VMEM Voltage & MATS Shows READ Error on Every VRAM.
Hellow guys,
I have 5 Asus strix 1060 with the same problem. No Singal, MATS Shows in every VRAM Read Errors. and i dont have present VMEM Voltage.
12V Present
5V Present
1.8V Present
PEX Rail 1V
GPU CORE Present 0,7v
VMEM NO Volts
PWM Controller
VCC 5V
EN 3.1 V
VREF 2.1 V
As far as i can understand or is a problem with the memory Controller ( in this case there is no solucion?) or for some reason the vram do not have Voltage. By the way i...
No activity results to display
Leave a comment: