I bought a T12-958 recently with an M8 handle and until now it has worked very well. The tip wasn't earthed but that was easily resolved.
Now, whenever it is switched on, it heats up to about 70*C then shows an [INVER] error on the screen and stops. In order to fix it I have to either unplug and re-plug the handle, or unplug and re-insert the tip from the handle. While doing that it changes to [ERROR], then it finishes heating up and works perfectly. Until it's turned off, after which it will show [INVER] again next time it is turned on.
Any idea what the problem is?
No content found
Please log in to your account to view your subscribed posts.
| Directory | Topics | Posts | Last Post | |||
|---|---|---|---|---|---|---|
| Badcaps Capacitor & Electronics Repair Forum | ||||||
|
Frequently Asked Questions (No Posting)
All new members, PLEASE READ HERE FIRST! Posting only allowed by established members.
Topics: 45
Posts: 733
|
45 | 733 |
|
|||
|
Announcements & Related News
Site announcements, capacitor-related news, and anything relavant you might think of... Got News? POST IT!!
Topics: 235
Posts: 42,349
|
235 | 42,349 |
|
|||
| Document & Software Archive | ||||||
|
Common Parts Library - Datasheets
Share or download datasheets or application notes for electronic components and other parts. Contribute your knowledge or ask questions. Before using please read our Terms of Service.
Topics: 1
Posts: 4
Last Post:
ncp81208 datasheet
|
1 | 4 |
|
|||
| General Topics | ||||||
|
General Capacitor Questions & Issues
Questions and answers for identifying whether your device has bad capacitors. Also post general capacitor-related questions and issues here.
Topics: 3,190
Posts: 32,715
|
3,190 | 32,715 |
|
|||
|
General Computer & Tech Discussion
Have just a general computer question, post it here. This can be anything from an OS issue, hardware issue not related to capacitors, upgrade question, or whatever basic tech-related issue is on your mind.... This is also a good place to share your tech projects!
Topics: 4,503
Posts: 74,879
|
4,503 | 74,879 |
|
|||
| Troubleshooting Hardware & Devices and Electronics Theory | ||||||
|
General Electronics Technical Discussion
If you have a general question concerning basic electronics theory or component function & usage, here's where it goes.
Topics: 3,984
Posts: 44,464
Last Post:
Question about electricity
|
3,984 | 44,464 |
|
|||
|
Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
Technical discussions covering any type of desktop motherboard, video/graphics card, controller card, or whatever other desktop peripheral you need help with. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 6,868
Posts: 37,593
|
6,868 | 37,593 |
|
|||
|
Sub-Forums:
| ||||||
|
Troubleshooting & Designing Networks
Post your computer network questions, ideas, gripes, and so on in here. This can be any type of network, whether its cabled, wireless, or whatever. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 501
Posts: 5,455
|
501 | 5,455 |
|
|||
|
Troubleshooting Laptops, Tablets, and Mobile Devices
Technical discussions covering any type of laptop, notebook, netbook, tablet, or smartphone. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 32,164
Posts: 307,404
|
32,164 | 307,404 | ||||
|
Sub-Forums:
| ||||||
|
Troubleshooting Computer Displays
Technical discussions covering any type of PC/computer display, whether it be CRT, LCD, or anything else. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 5,329
Posts: 75,737
|
5,329 | 75,737 |
by CapLeaker
Yesterday, 05:24 PM
|
|||
|
Troubleshooting TVs and Video Sources
Technical questions about your defective television, projection screen, LCD/plasma, or any other type of video device. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 27,493
Posts: 375,210
Last Post:
Samsung QE82Q70RAT no backlight
|
27,493 | 375,210 |
|
|||
|
Troubleshooting Power Supplies and Power Supply Design
Technical discussion for power supplies. This covers PC supplies, and any other related power supply issue. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 4,194
Posts: 65,322
|
4,194 | 65,322 |
|
|||
|
Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
Technical questions about your defective laser or ink printer, plotter, copier, scanner, and other imaging & printing devices. This section also includes digital cameras. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 304
Posts: 1,677
Last Post:
i need dump of printer canon TS5053
|
304 | 1,677 |
|
|||
|
Troubleshooting Audio Equipment
Technical discussion on audio equipment troubleshooting and installation. This can be anything from a home/car stereo, guitar amp, and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 2,340
Posts: 27,585
Last Post:
Squire bass guitar amp PB 15 no sound
|
2,340 | 27,585 |
|
|||
|
Troubleshooting Appliances and other Household Electronic Stuff
Technical discussion on household appliances & other household electrics & electronics; including troubleshooting and installation. This can be anything from a washer/dryer, dishwasher, microwave oven, other sordid kitchen electrics and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 226
Posts: 3,951
Last Post:
BOSCH Microwave CFA634 error E1006
|
226 | 3,951 |
|
|||
|
Troubleshooting Game Consoles & Other Weird Devices
This can be anything from game consoles to arcade games to anything else that doesn't really fit into any of the above categories. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 1,009
Posts: 10,924
|
1,009 | 10,924 |
by Aimbit
Yesterday, 06:19 PM
|
|||
|
Equipment Usage, Soldering, Techniques, and Reviews
Technical discussions concerning soldering techniques, usage of test equipment, how it works, what's best, and some pointers in using it all.
Topics: 1,382
Posts: 19,476
|
1,382 | 19,476 |
|
|||
-
05-06-2024, 01:36 PM
-
Hi all, I'm looking at what seems to be a nice puzzle
A ThinkPad T14s Gen 1 that stopped working more or less a month after the warranty expired. I tried to boot both Windows 10 and Debian 12 from a USB stick. In the first case, the system just reboots after showing the Windows logo for a few seconds, while I'm able to see the Linux kernel crashing if I boot the second in failsafe mode.
Interestingly, some times (unfortunately it's difficult to replicate) I manage to boot into Debian 12 live. Moreover, the kernel doesn't seem to crash always at the same point during...Today, 03:43 PM -
Hello! Greetings, can someone help me check the BIOS backup programming of this laptop? I backed it up with NeoProgrammer, but when I transferred the code to the chip, the device's power LED turns on and then immediately turns off. The tragic thing is that it was working; I made a backup because I replaced a chip that was causing the battery not to be detected. I tested the device and it worked, the battery was detected. However, as a method I sometimes apply when working with devices with power issues, I erased the BIOS IC and reprogrammed it, but this time it failed. I downloaded the BIOS from...Today, 03:44 PM
-
Looking for a schematic for this amp to help solve no output problem.
Power input ok no shorts, signal tracing for me is why I could do with a schematic.
thanks in advance...Today, 02:31 PM -
Hello everyone,
I have an ASUS Vivobook 14 OLED M3401QA which is not posting. Currently when plugged into power/turned on the power indicator will illuminate and the battery indicator will flash white roughly once every 3 seconds. Leading up to this it would sometimes turn on and then other times not turn on, furthermore it also showed a screen saying "new cpu installed, fTPM/PSP NV corrupted or fTPM/PSP NV structure changed" and then a screen telling me to recover the bios however it is no longer even posting at this stage.
The diagnostics steps I have attempted...Today, 02:34 PM -
Hello everybody,
I have seen a lot of posts about the A2237/A2338 about the 5V not boosting up to 20V issue, but none of them seem to have the exact problem as my board does.
My PPBUS_AON was measuring ~9.32V and the board kept power cycling, so I removed the fuse F5200 to measure PPVBAT_AON_CHGR_REG and indeed it was still 9.32V, but the board stopped power cycling. Then I measured U5200 values and got this:
U5200:
PPDCIN_AON_CHGR_R = 5.144V
AUX_DET = 1.287V
VDD = 2.767V
VDDP = 2.767V
AUX_OK = 0.848V
AMON = 0V
BMON...Today, 12:00 PM -
HELLO PLEASE I NEED THE DUMP OF THIIS MOTHERBOARD
THIIS IS THE OLD DUMP FOR MY BORD
MY MOTHERBOARD TURNED ON BUT DOES NOT DISPLAY...Today, 11:04 AM -
Hello Guys! I have trouble with my car radio Kenwood KDC 3051G I hope someone more knowledgeable can help me, I tried everything in my power that I stumbled upon online.
My radio is permanently in demo mode, it says Press Volume Knot Cancel Demo and when I press it nothing happens.
- Tried to unplug radio and plug it back in into power,
- Tried to reset radio by holding reset button key for 5,10,30 seconds while in power and without power, plugging it back in, it wouldn't work.
- Tried to hold 3,6 while turning it back on and then pressing 1,2...05-23-2024, 01:27 PM -
Hi, I have replaced a IT8176 in a Lenovo nm-d281 motherboard, and need to know how to program this keyboard controller.
The initial problem was an erratic behavior of numeric key pad, due to one of the IT8176 keyboard pins was shorted to gnd.
Now it completely doesn't work. I tried to R/W new chip with Vertyanov programmer but don't know which pin of the 34 pin keyboard connector have to be connected.
Does somebody know how it should be connected to Vertyanov or Svod programmer?...Today, 01:31 PM -
Hi everyone!
Hope you're all having a great day, and thank you very much for stopping by and taking the time to read this post to help me with my parents' Samsung TV.
My issue: No backlight.
Model: QE82Q70RAT
Type No: QE82Q70RAT
The TV was already serviced by Samsung once under warranty for the exact same issue, but six months after the fix, the backlight went out again. Now, Samsung is asking for nearly the same price as a brand new TV to fix this with the same 6-month guarantee.
So hopefully, I can fix this cheaper.
...05-22-2024, 06:56 AM
-
Looking for a schematic for this amp to help solve no output problem.
Power input ok no shorts, signal tracing for me is why I could do with a schematic.
thanks in advance...Today, 02:31 PM -
HELLO PLEASE I NEED THE DUMP OF THIIS MOTHERBOARD
THIIS IS THE OLD DUMP FOR MY BORD
MY MOTHERBOARD TURNED ON BUT DOES NOT DISPLAY...Today, 11:04 AM -
Hello everybody,
I have seen a lot of posts about the A2237/A2338 about the 5V not boosting up to 20V issue, but none of them seem to have the exact problem as my board does.
My PPBUS_AON was measuring ~9.32V and the board kept power cycling, so I removed the fuse F5200 to measure PPVBAT_AON_CHGR_REG and indeed it was still 9.32V, but the board stopped power cycling. Then I measured U5200 values and got this:
U5200:
PPDCIN_AON_CHGR_R = 5.144V
AUX_DET = 1.287V
VDD = 2.767V
VDDP = 2.767V
AUX_OK = 0.848V
AMON = 0V
BMON...Today, 12:00 PM -
Hello my vacuum cleaner dock died, 0V on output. I replace the caps but still no voltage. I found out that this resistor is broken (showing 0 Ohm) do know the value of this? Is this really 0 Ohm resistor?...Yesterday, 10:07 AM
-
Hello! Greetings, can someone help me check the BIOS backup programming of this laptop? I backed it up with NeoProgrammer, but when I transferred the code to the chip, the device's power LED turns on and then immediately turns off. The tragic thing is that it was working; I made a backup because I replaced a chip that was causing the battery not to be detected. I tested the device and it worked, the battery was detected. However, as a method I sometimes apply when working with devices with power issues, I erased the BIOS IC and reprogrammed it, but this time it failed. I downloaded the BIOS from...Today, 03:44 PM
-
Hi all, I'm looking at what seems to be a nice puzzle
A ThinkPad T14s Gen 1 that stopped working more or less a month after the warranty expired. I tried to boot both Windows 10 and Debian 12 from a USB stick. In the first case, the system just reboots after showing the Windows logo for a few seconds, while I'm able to see the Linux kernel crashing if I boot the second in failsafe mode.
Interestingly, some times (unfortunately it's difficult to replicate) I manage to boot into Debian 12 live. Moreover, the kernel doesn't seem to crash always at the same point during...Today, 03:43 PM -
Hello everyone,
I have an ASUS Vivobook 14 OLED M3401QA which is not posting. Currently when plugged into power/turned on the power indicator will illuminate and the battery indicator will flash white roughly once every 3 seconds. Leading up to this it would sometimes turn on and then other times not turn on, furthermore it also showed a screen saying "new cpu installed, fTPM/PSP NV corrupted or fTPM/PSP NV structure changed" and then a screen telling me to recover the bios however it is no longer even posting at this stage.
The diagnostics steps I have attempted...Today, 02:34 PM -
Hi, I have replaced a IT8176 in a Lenovo nm-d281 motherboard, and need to know how to program this keyboard controller.
The initial problem was an erratic behavior of numeric key pad, due to one of the IT8176 keyboard pins was shorted to gnd.
Now it completely doesn't work. I tried to R/W new chip with Vertyanov programmer but don't know which pin of the 34 pin keyboard connector have to be connected.
Does somebody know how it should be connected to Vertyanov or Svod programmer?...Today, 01:31 PM -
Hi everyone!
Hope you're all having a great day, and thank you very much for stopping by and taking the time to read this post to help me with my parents' Samsung TV.
My issue: No backlight.
Model: QE82Q70RAT
Type No: QE82Q70RAT
The TV was already serviced by Samsung once under warranty for the exact same issue, but six months after the fix, the backlight went out again. Now, Samsung is asking for nearly the same price as a brand new TV to fix this with the same 6-month guarantee.
So hopefully, I can fix this cheaper.
...05-22-2024, 06:56 AM -
I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
Obviously the same LVDS connector for the screen connection...Today, 03:27 AM