Announcement

Collapse
No announcement yet.

Badcaps Electronics Repair Forum & Schematic Search

Collapse
 
  • Filter
  • Time
  • Answered
  • Show
  • New Topics
Clear All
new posts
No content found
Show More
 
  • Filter
  • Time
  • Show
  • New Topics
Clear All
new posts
Please log in to your account to view your subscribed posts.
Directory Topics Posts Last Post
Badcaps Capacitor & Electronics Repair Forum
Frequently Asked Questions (No Posting)
All new members, PLEASE READ HERE FIRST! Posting only allowed by established members.
Topics: 45 Posts: 733
45 733
Announcements & Related News
Site announcements, capacitor-related news, and anything relavant you might think of... Got News? POST IT!!
Topics: 236 Posts: 42,298
236 42,298
Document & Software Archive
Common Parts Library - Datasheets
Share or download datasheets or application notes for electronic components and other parts. Contribute your knowledge or ask questions. Before using please read our Terms of Service.
Topics: 1 Posts: 4
Last Post: ncp81208 datasheet
1 4
BAKEEL1990
General Topics
General Capacitor Questions & Issues
Questions and answers for identifying whether your device has bad capacitors. Also post general capacitor-related questions and issues here.
Topics: 3,190 Posts: 32,714
3,190 32,714
General Computer & Tech Discussion
Have just a general computer question, post it here. This can be anything from an OS issue, hardware issue not related to capacitors, upgrade question, or whatever basic tech-related issue is on your mind.... This is also a good place to share your tech projects!
Topics: 4,502 Posts: 74,876
4,502 74,876
Troubleshooting Hardware & Devices and Electronics Theory
General Electronics Technical Discussion
If you have a general question concerning basic electronics theory or component function & usage, here's where it goes.
Topics: 3,985 Posts: 44,460
3,985 44,460
stj
by stj
Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
Technical discussions covering any type of desktop motherboard, video/graphics card, controller card, or whatever other desktop peripheral you need help with. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 6,867 Posts: 37,567
6,867 37,567
Sub-Forums:
Troubleshooting & Designing Networks
Post your computer network questions, ideas, gripes, and so on in here. This can be any type of network, whether its cabled, wireless, or whatever. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 501 Posts: 5,455
501 5,455
Troubleshooting Laptops, Tablets, and Mobile Devices
Technical discussions covering any type of laptop, notebook, netbook, tablet, or smartphone. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 32,149 Posts: 307,306
32,149 307,306
Sub-Forums:
BIOS Requests ONLY! (12,825/155,000)
Schematic Requests ONLY! (4,790/28,737)
Troubleshooting Computer Displays
Technical discussions covering any type of PC/computer display, whether it be CRT, LCD, or anything else. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 5,329 Posts: 75,732
5,329 75,732
Troubleshooting TVs and Video Sources
Technical questions about your defective television, projection screen, LCD/plasma, or any other type of video device. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 27,486 Posts: 375,148
27,486 375,148
Troubleshooting Power Supplies and Power Supply Design
Technical discussion for power supplies. This covers PC supplies, and any other related power supply issue. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 4,190 Posts: 65,294
4,190 65,294
Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
Technical questions about your defective laser or ink printer, plotter, copier, scanner, and other imaging & printing devices. This section also includes digital cameras. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 304 Posts: 1,675
304 1,675
Troubleshooting Audio Equipment
Technical discussion on audio equipment troubleshooting and installation. This can be anything from a home/car stereo, guitar amp, and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 2,338 Posts: 27,574
2,338 27,574
Troubleshooting Appliances and other Household Electronic Stuff
Technical discussion on household appliances & other household electrics & electronics; including troubleshooting and installation. This can be anything from a washer/dryer, dishwasher, microwave oven, other sordid kitchen electrics and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 226 Posts: 3,951
226 3,951
Troubleshooting Game Consoles & Other Weird Devices
This can be anything from game consoles to arcade games to anything else that doesn't really fit into any of the above categories. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 1,008 Posts: 10,919
1,008 10,919
Equipment Usage, Soldering, Techniques, and Reviews
Technical discussions concerning soldering techniques, usage of test equipment, how it works, what's best, and some pointers in using it all.
Topics: 1,381 Posts: 19,466
1,381 19,466

What's Going On?

Collapse

There are currently 348667 users online. 4258 members and 344409 guests.

Most users ever online was 1,342,976 at 10:51 PM on 04-26-2024.

Badcaps Statistics

Collapse

Topics: 102,704   Posts: 1,274,421   Members: 496,187   Active Members: 17,154
Welcome to our newest member, Bunny Hop.

Latest Topics

Collapse

  • zaler808
    Macbook Pro 15" Late 2013 A1398 Turn off randomly but after workload it shows black screen with fans spinning
    by zaler808
    Hi guys, this my first post but i want to be brief about it, i recently got a MBP L2013, the problem was that after some use the macbook shutted down randomly, at first i suspected to be the battery, and after connecting it with the charger i noticed that i didn´t shut, but after an hour or so it shutdown, after that i started searching a solution to my problem, but my brother tried to help me to find the problem and it that process to replicate the problem he reproduced a 4k video in multiple tabs and not much time after the macbook shutdown to never power again, what i noticed was that the...
    Today, 05:17 PM
  • matk
    Question about electricity
    by matk
    Hello, I have a question about electricity. Suppose I'm well insulated from ground and neutral, and the live wire of mains comes in touch with a wound in my finger, will this potential interfere with body voltages, hearth for example, or it will only go to its circuit return path ?

    Thanks!
    Today, 02:12 PM
  • Arc717
    How do I flash bios to an Alienware M16 R1 AMD edition?
    by Arc717
    I am trying to downgrade my bios on my Alienware so I can undervolt & overclock my CPU, and overclock my ram. I need to get to bios 1.2.2 for this. Dell doesn't allow downgrades, and their bios file is an exe compiled in c++, so I can't decompile it easily. I am wondering if I can flash the bios manually using a usb flasher. I would like to know if this is possible, and if so, where the bios chip would be. I know flashers are pretty cheap and the bios chip is 8-pin. There are two of these chips only when I open the back panel of the laptop. I'm not sure if there are any on the other side of...
    05-17-2024, 03:34 PM
  • skyline_bogota
    Lenovo S410P charging IC
    by skyline_bogota
    GOOD DAY,
    I NEED HELP SOMEONE KNOWS WHAT CHARGING IC HANDLES THIS BOARD, IT IS FROM A LENOVO S410P, BUT I REMOVED THE INTEGRATED ONE AND IT IS IN VERY BAD CONDITION YOU CAN'T SEE THE LETTERS.

    IT'S A "BQ​"...
    Yesterday, 11:44 AM
  • spleenharvester
    Quecoo T12-958 soldering station - INVER error?
    by spleenharvester
    I bought a T12-958 recently with an M8 handle and until now it has worked very well. The tip wasn't earthed but that was easily resolved.

    Now, whenever it is switched on, it heats up to about 70*C then shows an [INVER] error on the screen and stops. In order to fix it I have to either unplug and re-plug the handle, or unplug and re-insert the tip from the handle. While doing that it changes to [ERROR], then it finishes heating up and works perfectly. Until it's turned off, after which it will show [INVER] again next time it is turned on.

    Any idea what the problem is?
    05-06-2024, 01:36 PM
  • Stanley1843
    Motherboard W26361-W84-X-02 - Black Screen
    by Stanley1843
    Hello to everyone.
    My [B]W26361-W84-X-02[/B] motherboard starts but don't show image (no logo screen neither bios). Because, I have two of them I desoldered the bios chip from the no working motherboard and I soldered it to the working motherboard and the motherboard works OK, so the bios firmware isn't the problem. Below I took some measurements from the no working motherboard when is power on. Also, I replaced the RAM and didn't work again (maybe some pins from the RAM slot don't have the right voltage?). I replaced and the bios battery, and I made reset on the bios and again the problem...
    Today, 03:51 PM
  • therealraffles
    Galaxy Buds FE SM-R400
    by therealraffles
    Hey all

    I have a set of FE buds, the right side will not connect, I don’t believe it is even charging..I am able to connect and get audio through the left, the case appears to charge itself and the left correctly.

    The left has ~1.3v between the pins, the right side has ~-0.7v ..

    This is wonky, surely? My assumption would at least be the same charging voltage, even if the..

    can someone confirm that the earbuds polarity is different?

    I may try and inject 1.3v onto the charging pads of the right, if it will take even a little charge...
    Today, 11:13 AM
  • FrozenHaxor
    Lenovo ideapad 520, NM-B452 not powering up
    by FrozenHaxor
    Hey, I'm repairing a board from liquid damaged laptop, managed to get 5V and 3.3V rails up, some passives were corroded away. Only problem right now is no reaction to power button, there is no PCH_PWR_EN signal, DPWROK_EC is 2.5V, +1.0VALW is missing. Replaced KBC with brand new one, reprogrammed. No change. Any ideas? Schematic and boardview are available, attached them at the bottom. Boardview file can be opened by "BoardViewer" software.



    Please don't mind the damage near UC4, it was caused by liquid damage and there is battery connector on the other side,...
    Today, 11:10 AM
  • Omron
    Kenwood KDC 3051G Car Radio permanently stuck in Demo Mode please help
    by Omron
    Hello Guys! I have trouble with my car radio Kenwood KDC 3051G I hope someone more knowledgeable can help me, I tried everything in my power that I stumbled upon online.

    My radio is permanently in demo mode, it says Press Volume Knot Cancel Demo and when I press it nothing happens.

    - Tried to unplug radio and plug it back in into power,

    - Tried to reset radio by holding reset button key for 5,10,30 seconds while in power and without power, plugging it back in, it wouldn't work.

    - Tried to hold 3,6 while turning it back on and then pressing 1,2...
    Today, 01:27 PM
  • m4a2t0t
    LG 60UJ6050-UA Backlight
    by m4a2t0t
    I can see the image in the background with a flashlight. I have 260V on LED+ and 90V on LED -. The backlights were acting weird with my tester so I pulled the panel and one LED does take about 2 seconds before it lights up but thats it. Is the voltage at the LED connector correct?...
    05-11-2024, 08:25 PM

Trending

Collapse

  • matk
    Question about electricity
    by matk
    Hello, I have a question about electricity. Suppose I'm well insulated from ground and neutral, and the live wire of mains comes in touch with a wound in my finger, will this potential interfere with body voltages, hearth for example, or it will only go to its circuit return path ?

    Thanks!
    Today, 02:12 PM
  • zaler808
    Macbook Pro 15" Late 2013 A1398 Turn off randomly but after workload it shows black screen with fans spinning
    by zaler808
    Hi guys, this my first post but i want to be brief about it, i recently got a MBP L2013, the problem was that after some use the macbook shutted down randomly, at first i suspected to be the battery, and after connecting it with the charger i noticed that i didn´t shut, but after an hour or so it shutdown, after that i started searching a solution to my problem, but my brother tried to help me to find the problem and it that process to replicate the problem he reproduced a 4k video in multiple tabs and not much time after the macbook shutdown to never power again, what i noticed was that the...
    Today, 05:17 PM
  • Stanley1843
    Motherboard W26361-W84-X-02 - Black Screen
    by Stanley1843
    Hello to everyone.
    My [B]W26361-W84-X-02[/B] motherboard starts but don't show image (no logo screen neither bios). Because, I have two of them I desoldered the bios chip from the no working motherboard and I soldered it to the working motherboard and the motherboard works OK, so the bios firmware isn't the problem. Below I took some measurements from the no working motherboard when is power on. Also, I replaced the RAM and didn't work again (maybe some pins from the RAM slot don't have the right voltage?). I replaced and the bios battery, and I made reset on the bios and again the problem...
    Today, 03:51 PM
  • therealraffles
    Galaxy Buds FE SM-R400
    by therealraffles
    Hey all

    I have a set of FE buds, the right side will not connect, I don’t believe it is even charging..I am able to connect and get audio through the left, the case appears to charge itself and the left correctly.

    The left has ~1.3v between the pins, the right side has ~-0.7v ..

    This is wonky, surely? My assumption would at least be the same charging voltage, even if the..

    can someone confirm that the earbuds polarity is different?

    I may try and inject 1.3v onto the charging pads of the right, if it will take even a little charge...
    Today, 11:13 AM
  • sewsulle
    A2442 820-02098 5v 0a
    by sewsulle
    Good afternoon,
    I'd appreciate help diagnosing my A2442 that's only taking 5v and 0a

    This was my personal laptop and I had closed it at the end of a class and opened it in the next class when it just didn't wake up from sleep (The battery was charged). I connected a charger later that night and it booted right up but touch ID stopped working. The next day it did the same thing but never turned back on when I plugged in a charger.

    I though the touch ID issue was weird but I'm not sure if that info helps.

    When this happened months ago I tried to diagnose...
    Yesterday, 07:56 PM
  • Maxpower3
    Lenovo Thinkpad Ec Pwd Bypass
    by Maxpower3
    Hello everyone.

    Here is the bypass solution for several Lenovo ECs.
    This has worked on many ECs.
    Only works if password is contained in EC

    I succeeded on many models
    [URL="https://www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-laptops-tablets-and-mobile-devices/bios-requests-only/104872-lenovo-l15-gen-2-ryzen-password-removal-w-vertyanov-successor?p=3217086#post3217086"]https://www.badcaps.net/forum/troubl...86#post3217086[/URL]
    [URL="https://www.youtube.com/channel/UCeF58jC2Bt_adKcguvynjeA"]https://www.youtube.com/channel/UCeF...t_adKcguvynjeA[/URL]...
    03-17-2024, 11:57 AM
  • Tehzeeb
    I need DS-7104hghi-k1 80388 firmware
    by Tehzeeb
    I need ds-7104hghi-k1 80388 firmware
    my attached bios is password protected
    Today, 08:42 AM
  • sansanpartida
    Samsung QE82Q70RAT no backlight
    by sansanpartida
    Hi everyone!

    Hope you're all having a great day, and thank you very much for stopping by and taking the time to read this post to help me with my parents' Samsung TV.

    My issue: No backlight.

    Model: QE82Q70RAT
    Type No: QE82Q70RAT

    The TV was already serviced by Samsung once under warranty for the exact same issue, but six months after the fix, the backlight went out again. Now, Samsung is asking for nearly the same price as a brand new TV to fix this with the same 6-month guarantee.

    So hopefully, I can fix this cheaper.
    ...
    Yesterday, 06:56 AM
  • FrozenHaxor
    Lenovo ideapad 520, NM-B452 not powering up
    by FrozenHaxor
    Hey, I'm repairing a board from liquid damaged laptop, managed to get 5V and 3.3V rails up, some passives were corroded away. Only problem right now is no reaction to power button, there is no PCH_PWR_EN signal, DPWROK_EC is 2.5V, +1.0VALW is missing. Replaced KBC with brand new one, reprogrammed. No change. Any ideas? Schematic and boardview are available, attached them at the bottom. Boardview file can be opened by "BoardViewer" software.



    Please don't mind the damage near UC4, it was caused by liquid damage and there is battery connector on the other side,...
    Today, 11:10 AM
  • Scarfycake
    ASUS proart Studiobook h7600ZW; Had DC in port replaced and all the sudden it isn't charging but is the charging sign is on!
    by Scarfycake
    Hi all,

    I sent my [B]ProArt Studiobook 16 OLED (H7600, 12th Gen Intel) [/B]to the local repair guys to have a very simple DC in port replaced. I sourced the part myself on accessoires-asus (french company) after struggling to find the right part in the UK. It looked completely the same to the installed part from what I can tell. Originally the only issue with the laptop was a bad / loose DC connection, and so the computer and battery acted completely normal aside from a very poor connection that would fail at certain angles. After the repair was completed I brought it home and used...
    05-21-2024, 08:16 AM
Working...
X