saisoni20
Senior Member
Last Activity: Today, 05:26 PM
Joined: 02-26-2022
Location: Toronto
-
No Post. power button LED is keep blinking.... -
Bios Cracker[USER="582869"]Bios Cracker[/USER]
Thank you so much for the file. 1st one works but still has led blinking at power button.Leave a comment:
-
Hi everyone,
Can someone help me with the [B]IdeaPad Flex 5 14IRU8 bios.
Board No : LC58-14IRU[/B]
Sorry I don't have serial number.
PROBLEM NO POST
Attached Old bios.
Hi everyone,
Can someone help me with the [B]IdeaPad Flex 5 14IRU8 bios.
Board No : LC58-14IRU[/B]
Sorry I don't have serial number.
PROBLEM NO POST
Attached Old bios.
Hi everyone,
Can someone help me with the [B]IdeaPad Flex 5 14IRU8 bios.
Board No : LC58-14IRU[/B]
Sorry I don't have serial number.
PROBLEM NO POST...Leave a comment:
-
password?...Leave a comment:
-
mon2[USER="295753"]mon2[/USER] Thank you so muchLeave a comment:
-
mon2[USER="295753"]mon2[/USER] Do you have power sequence as posted above for A1708?Leave a comment:
-
PITERPENY[USER="480606"]PITERPENY[/USER] Did you fins any solution. I have mac with same problem....Leave a comment:
-
[B]It's 1663[/B]...Leave a comment:
-
HP OMEN 16 - G3KP - DAG3KPMBAD0 (AMD) schematic and boardview
Hi there
Anyone has HP OMEN 16 - Quanta G3KP - DAG3KPMBAD0 (AMD) schematic and boardview?
Thanks -
Hi There,
I have RT809F and I am trying to connect MEC1663 for Lenovo X1 Yoga 5th Gen. Programmer is identifying to chip but always gives error for CHIP MAY BE DAMAGED or ENCRYPATED as below.
What should cause this issue?
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"image.png","data-attachmentid":3544351}[/ATTACH]Hi There,
I have RT809F and I am trying to connect MEC1663 for Lenovo X1 Yoga 5th Gen. Programmer is identifying to chip but always gives error for CHIP MAY BE...Leave a comment:
-
mcplslg123[USER="149220"]mcplslg123[/USER] Thanks for the response. Do you have schematics and board view for this?Leave a comment:
-
pc_okay[USER="409855"]pc_okay[/USER] Hi, I have same problem. Did find any solution for this?Leave a comment:
-
Hi Mon2
I have tried removing those inductors same U7700 is getting hot.Leave a comment:
-
A2442 820-02098 5v 0a - PP3V8_AON short
Good afternoon,
I'd appreciate help diagnosing my A2442 that's only taking 5v and 0a. Magsafe charger is not working.
PPBUS_AON (Battery unplugged) - ~12.00
Found out PP3V8_AON is short to the ground. I have feed 1V and U7700 is getting hot.
Is there any way to isolate U7700 from PP3V8_AON. Just to make sure any other component is not bad which is causing U7700 to get hot.
Thanks in advance
-
HP Pavilion x360 - RIESLING ADL UMA MB 213144-1
Hi
I need schematic and BRD for HP Pavilion x360 - RIESLING ADL UMA MB 213144-1.... -
After some days it become dead again.
It's posting but no display now. BIOS got corrupted again.
Any clue what can cause this issue?Leave a comment:
-
They all are 150k between [B]PPBUS_G3H[/B] rail.They all are 150k between [B]PPBUS_G3H[/B] rail.They all are 150k between [B]PPBUS_G3H[/B] rail.Leave a comment:
-
after removing fuse power cycling stops.
[B]ppbus_g3h[/B] is stable 13V
indusctor [B]L7900 -PPVCCPCH_S5G[/B] and [B]L8060 -PP1V_S5G[/B] is showing me 0.3 ohmafter removing fuse power cycling stops.
[B]ppbus_g3h[/B] is stable 13V
indusctor [B]L7900 -PPVCCPCH_S5G[/B] and [B]L8060 -PP1V_S5G[/B] is showing me 0.3 ohmafter removing fuse power cycling stops.
[B]ppbus_g3h[/B] is stable 13V
indusctor [B]L7900 -PPVCCPCH_S5G[/B] and [B]L8060 -PP1V_S5G[/B] is showing me 0.3 ohmafter removing fuse power cycling stops.
[B]ppbus_g3h[/B]Leave a comment:
-
a1708 - 820-00840 - No Power 20V-0.03A Not stable.
Hi,
I have got A1708 has 20v-0.03A (turning ON-OFF) No Power. Input Amp is turning on -off.
I have PPBUS_G3H - 13V.
Voltage is fluctuating at [B]L7030 [/B]with input 0 t0 7.8V.
Someone can help me with this?
Hi,
I have got A1708 has 20v-0.03A (turning ON-OFF) No Power. Input Amp is turning on -off.
I have PPBUS_G3H - 13V.
Voltage is fluctuating at [B]L7030 [/B]with input 0 t0 7.8V.
Someone can help me with this?
Hi,
I have got A1708 has 20v-0.03A (turning ON-OFF) No Power.
No activity results to display
Leave a comment: