Hi,
working on a ASUS ROG STRIX GL702VSK 60NB0DZ0-MB1260 that does not power on. At the PQ8900 PIN2 (P_CHG_ACMOS_G_20) I am receiving 24.7V and PIN1 (P_CHG_ACMOS_S_20) 20V, however when I place the PQ8901 P_CHG_ACMOS_G_20 it drops 0V. I don't have the replacement mosfets ( N-MOSFET QM3058M6AC PRPAK5*6
UBIQ) however will any N-channel mosfet with similar parameters work ? I also found that PCI8703, PCI8701 are shorted. any help would be grateful.
No content found
Please log in to your account to view your subscribed posts.
| Directory | Topics | Posts | Last Post | |||
|---|---|---|---|---|---|---|
| Badcaps Capacitor & Electronics Repair Forum | ||||||
|
Frequently Asked Questions (No Posting)
All new members, PLEASE READ HERE FIRST! Posting only allowed by established members.
Topics: 45
Posts: 733
|
45 | 733 |
|
|||
|
Announcements & Related News
Site announcements, capacitor-related news, and anything relavant you might think of... Got News? POST IT!!
Topics: 235
Posts: 41,963
|
235 | 41,963 |
|
|||
| Document & Software Archive | ||||||
|
Common Parts Library - Datasheets
Share or download datasheets or application notes for electronic components and other parts. Contribute your knowledge or ask questions. Before using please read our Terms of Service.
Topics: 1
Posts: 4
Last Post:
ncp81208 datasheet
|
1 | 4 |
|
|||
| General Topics | ||||||
|
General Capacitor Questions & Issues
Questions and answers for identifying whether your device has bad capacitors. Also post general capacitor-related questions and issues here.
Topics: 3,186
Posts: 32,702
|
3,186 | 32,702 |
|
|||
|
General Computer & Tech Discussion
Have just a general computer question, post it here. This can be anything from an OS issue, hardware issue not related to capacitors, upgrade question, or whatever basic tech-related issue is on your mind.... This is also a good place to share your tech projects!
Topics: 4,498
Posts: 74,847
|
4,498 | 74,847 |
|
|||
| Troubleshooting Hardware & Devices and Electronics Theory | ||||||
|
General Electronics Technical Discussion
If you have a general question concerning basic electronics theory or component function & usage, here's where it goes.
Topics: 3,975
Posts: 44,356
Last Post:
Identifying a DC/DC step down converter
|
3,975 | 44,356 |
|
|||
|
Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
Technical discussions covering any type of desktop motherboard, video/graphics card, controller card, or whatever other desktop peripheral you need help with. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 6,820
Posts: 37,345
Last Post:
Need bios, Hp 440 g6 All in One
|
6,820 | 37,345 |
|
|||
|
Sub-Forums:
| ||||||
|
Troubleshooting & Designing Networks
Post your computer network questions, ideas, gripes, and so on in here. This can be any type of network, whether its cabled, wireless, or whatever. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 501
Posts: 5,447
|
501 | 5,447 |
|
|||
|
Troubleshooting Laptops, Tablets, and Mobile Devices
Technical discussions covering any type of laptop, notebook, netbook, tablet, or smartphone. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 31,933
Posts: 304,614
Last Post:
Hp CSL50/CSL53 LA-E791P
|
31,933 | 304,614 |
|
|||
|
Sub-Forums:
| ||||||
|
Troubleshooting Computer Displays
Technical discussions covering any type of PC/computer display, whether it be CRT, LCD, or anything else. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 5,323
Posts: 75,707
Last Post:
Screwed onto the board. Thoughts?
|
5,323 | 75,707 |
|
|||
|
Troubleshooting TVs and Video Sources
Technical questions about your defective television, projection screen, LCD/plasma, or any other type of video device. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 27,454
Posts: 374,776
|
27,454 | 374,776 |
|
|||
|
Troubleshooting Power Supplies and Power Supply Design
Technical discussion for power supplies. This covers PC supplies, and any other related power supply issue. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 4,183
Posts: 65,245
Last Post:
12v PSU help please.
|
4,183 | 65,245 |
|
|||
|
Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
Technical questions about your defective laser or ink printer, plotter, copier, scanner, and other imaging & printing devices. This section also includes digital cameras. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 302
Posts: 1,668
Last Post:
Canon PIXMA MG5650 dump
|
302 | 1,668 |
|
|||
|
Troubleshooting Audio Equipment
Technical discussion on audio equipment troubleshooting and installation. This can be anything from a home/car stereo, guitar amp, and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 2,327
Posts: 27,488
|
2,327 | 27,488 |
|
|||
|
Troubleshooting Appliances and other Household Electronic Stuff
Technical discussion on household appliances & other household electrics & electronics; including troubleshooting and installation. This can be anything from a washer/dryer, dishwasher, microwave oven, other sordid kitchen electrics and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 223
Posts: 3,909
|
223 | 3,909 |
|
|||
|
Troubleshooting Game Consoles & Other Weird Devices
This can be anything from game consoles to arcade games to anything else that doesn't really fit into any of the above categories. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 1,002
Posts: 10,878
|
1,002 | 10,878 |
|
|||
|
Equipment Usage, Soldering, Techniques, and Reviews
Technical discussions concerning soldering techniques, usage of test equipment, how it works, what's best, and some pointers in using it all.
Topics: 1,378
Posts: 19,407
|
1,378 | 19,407 |
|
|||
-
Yesterday, 04:34 PM
-
I bought a T12-958 recently with an M8 handle and until now it has worked very well. The tip wasn't earthed but that was easily resolved.
Now, whenever it is switched on, it heats up to about 70*C then shows an [INVER] error on the screen and stops. In order to fix it I have to either unplug and re-plug the handle, or unplug and re-insert the tip from the handle. While doing that it changes to [ERROR], then it finishes heating up and works perfectly. Until it's turned off, after which it will show [INVER] again next time it is turned on.
Any idea what the problem is?05-06-2024, 01:36 PM -
Hello guys
Because the unit is old (but only occasionally used) the loudness button causes some noise due to bad contact,
sprays did not work, so i decided to solder the pins that it connects on the pcb at the on (loudness on) position
i did that and it worked fine, i know from the bottom of my heart that the switch connects 2 pins and also d/c other 2 pins
on every position it have (6 pin switch), so i was curious what would happen if i clicked the switch off while the pins are soldered at on (so basiclly on and off at the same time), when i did so the sound is gone, nothing...05-05-2024, 06:20 AM -
Hi friend, I've this notebook HP Gaming 16-a0006nl with QUANTA DAG3JBMB8D0 that won't power on.
I start checking first mosfet and they seems to be ok.
On power button I get 3 that go to 0 on pressing, and come to 3v on release.
After I check charge ic that is BQ738H
I write here measure with battery and ac
19
19
19
25
3
1.9
0
3.1
3.1
1
11
11
11
gnd
0
6
10
11
11
19
I've 0 on pin 7 IOUT and on pin 15 LODRV.
...Today, 07:09 AM -
Dear forum,
I'm stuck with this old TV unit.
PSU: 17PW04-1
MB: 17MB62-1
Symptoms:
- Blue LED constantly blinking when connected to AC.
- Only sigh of life is beeping when touching the capactive buttons on the front.
Diagnostics so far:
Checked the PSU output voltages:
12V present
5V present altought its only around 4.2V
3V is present measured 3.4V.
I check TP 202 which is for the short circuit protection: 0.606V on diode mode
Since I met with some vestel models before with similiar symptoms...05-03-2024, 03:18 AM -
Device: Laptop
Manufacture: Huawei
Model: NDZ-WFH9A
Motherboard: DAH98UMB8D0 REV D HF
Issue: Please help me and remove power on password
Attach my original bios.
Thanks in advance
[ATTACH]n3267210[/ATTACH] Device: Laptop
Manufacture: Huawei
Model: NDZ-WFH9A
Motherboard: DAH98UMB8D0 REV D HF
Issue: Please help me and remove power on password
Attach my original bios.
Thanks in advance
[ATTACH]n3267210[/ATTACH] ...Today, 11:21 AM -
I am still new to this, so I might sound brainless/ignorant in parts of my description/questions, since I have a lot of gaps in my knowledge, but I will do my best.
The laptop is Lenovo Legion Y540-15IRH, and the motherboard model is NM-C221 Rev 2.0 (Schematics and BoardView can be easily found). To save time I have the exact problem in the laptop as the one shown in this video:
[url]https://www.youtube.com/watch?v=tfucZ_WKpz4[/url]
I was checking the voltages I found that the main power rail V20B+ is good, and same for the +3VALW circut, but when I tried the +5VALW,...Today, 10:52 AM -
How about everyone, I have a MacBook Air which did not turn on, it had a lot of corrosion on the card where the sound plug and the fingerprint go, I have replaced it and the device now turns on but has no sound, if I connect a headphone through the plug, yes There is sound but the external speakers do not sound....Today, 10:26 AM
-
Need help here...
I'm new on the forum and I'm not professional in electronics so i ask sorry in advance for eventual errors...
As title says, i have a LA-H323P dead.
Now, little background.
The computer was working fine, just seems that the cable of screen was dying because it had the classic color problem, sometimes green, sometimes violet, sometimes perfect, but anyway working.
When i opened it the battery was so fat that was seriously near to explode.
So i removed the battery... and turned on the notebook... that was, again, working perfectly fine....04-28-2024, 03:31 AM -
Hello BadCaps Forum! I'm new to the group and hope you guys can help me with something. I have a 2017 Apple imac A1419 board # 820-00609-A that i'm trying to identify a capacitor failure on. The capacitor is a tantalum 68 C79. See pic attached. I've tried to figure this out using the web and unfortunately can't find the information. Can someone tell me what the Capacitance value, voltage, etc is for these 68 C79 caps are? Where could i pick up a replacement? Thanks in advance!!...05-03-2024, 04:00 PM
-
Hi friend, I've this notebook HP Gaming 16-a0006nl with QUANTA DAG3JBMB8D0 that won't power on.
I start checking first mosfet and they seems to be ok.
On power button I get 3 that go to 0 on pressing, and come to 3v on release.
After I check charge ic that is BQ738H
I write here measure with battery and ac
19
19
19
25
3
1.9
0
3.1
3.1
1
11
11
11
gnd
0
6
10
11
11
19
I've 0 on pin 7 IOUT and on pin 15 LODRV.
...Today, 07:09 AM -
How about everyone, I have a MacBook Air which did not turn on, it had a lot of corrosion on the card where the sound plug and the fingerprint go, I have replaced it and the device now turns on but has no sound, if I connect a headphone through the plug, yes There is sound but the external speakers do not sound....Today, 10:26 AM
-
I am still new to this, so I might sound brainless/ignorant in parts of my description/questions, since I have a lot of gaps in my knowledge, but I will do my best.
The laptop is Lenovo Legion Y540-15IRH, and the motherboard model is NM-C221 Rev 2.0 (Schematics and BoardView can be easily found). To save time I have the exact problem in the laptop as the one shown in this video:
[url]https://www.youtube.com/watch?v=tfucZ_WKpz4[/url]
I was checking the voltages I found that the main power rail V20B+ is good, and same for the +3VALW circut, but when I tried the +5VALW,...Today, 10:52 AM -
Hi,
working on a ASUS ROG STRIX GL702VSK 60NB0DZ0-MB1260 that does not power on. At the PQ8900 PIN2 (P_CHG_ACMOS_G_20) I am receiving 24.7V and PIN1 (P_CHG_ACMOS_S_20) 20V, however when I place the PQ8901 P_CHG_ACMOS_G_20 it drops 0V. I don't have the replacement mosfets ( N-MOSFET QM3058M6AC PRPAK5*6
UBIQ) however will any N-channel mosfet with similar parameters work ? I also found that PCI8703, PCI8701 are shorted. any help would be grateful.Yesterday, 04:34 PM -
Please help sir, this board does not turn on because VSYS_OUT is 9.2v, I compared it with a normal board VSYS_OUT is 10.2v, I have replaced the PQ101 and PQ102 mosfet and BQ 25700 which is known to be good, but the results are still the same, thank you
VSYS_OUT 9.2v
Meter in resistance mode auto range 6M ohm ok
NORMAL BOARD VSYS_OUT 10.2V
PQ101
PIN 2 20V
PIN 7 0.004V
PIN 6 6V
PIN 5678 0V
PQ102
PIN 567 0V
PIN 9 0.004V
PIN 234 9.2V (VSYS_OUT)
PU101 BQ25700ARSNR
1 VBUS 20V...05-06-2024, 10:48 AM -
Device: Laptop
Manufacture: Huawei
Model: NDZ-WFH9A
Motherboard: DAH98UMB8D0 REV D HF
Issue: Please help me and remove power on password
Attach my original bios.
Thanks in advance
[ATTACH]n3267210[/ATTACH] Device: Laptop
Manufacture: Huawei
Model: NDZ-WFH9A
Motherboard: DAH98UMB8D0 REV D HF
Issue: Please help me and remove power on password
Attach my original bios.
Thanks in advance
[ATTACH]n3267210[/ATTACH] ...Today, 11:21 AM -
hi.
I want hp 450 g6 bios.
all of my voltages are present and it may be from the bios
SN: 5cd9227bc9
da0x8jmb8e0
I am not sure about my backup file...Today, 08:29 AM -
Hi folks.
Any help with identifying this IC? Should be some DC/DC step down converter. 'ACF G45' ... I thought, it is Monolithic Power Systems ( based on this topic --> [url]https://www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-laptops-tablets-and-mobile-devices/80630-ic-marking-codes-and-datasheets[/url] ), but can't find this marking there. Will be thankful for any hint. Thanks in advance.https://Hi folks.<br /> Any help wit... Power Systems...Today, 05:37 AM -
there is no reaction, it hangs at 20 V/0A. There was a little corrosion in the u7650 area. Replacing the u7000 did not help. Tell me, what else could it be? PPBUS_G3H=12.9V
Flashing the bios with a clean region also did not work!05-06-2024, 04:31 PM -
Good morning.
I need help. My old mac book air model A1466 EMC 2632 serial C02M6TLEF5V7 is password locked on the firmware. I tried to make some attempts with the ch341a programmer but, not being an expert, I can't solve it. The programmer tells me that the chip is a 25 spi flash winbond w25q64fv. I didn't understand how to remove psw. I worked on the disassembled board. How do I know if it's ok?
Thanks for your help. I managed to save a copy of the bin file but the post won't let me load it with a bin extension.Today, 10:01 AM