Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
A1990 does not have flexgate issue. Liquid spill on display connector LCD or logic board side also burnt backlight connector . Dented bottom corners on screen can sometimes cause no backlight . Dustgate can cause no backlight....
-
Are you saying the sensor has damage ? yes they need programming...
Leave a comment:
-
-
different sticky[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"sticky.png","data-attachmentid":3152896}[/ATTACH]...
- Likes 1
Leave a comment:
-
-
MacBook Pro M1 Max Desktop Brave...maybe just just a sticky cleanup....are all of them still relevant ?...
Leave a comment:
-
Please sir can we have another sticky ?
jk .....but dam those stickies take up more than a complete page view ! We need a filter to not show them all the time.
-
Re: Soldering flex cable - tips & tricks
[url]https://www.youtube.com/watch?v=5nBiN8Uujlw&t=29s[/url]Re: Soldering flex cable - tips & tr...lw&t=29s[/url]
Leave a comment:
-
MacBook 14" M2 820-02841 no power A2779
MacBook 14" M2 820-02841 A2779
no power / no magsafe light
No damage at all
P3V8AON short to ground less than 1ohm
found CT610 capacitor for the touchID area was short now fixed
I used 820-02443 board view and schematic
just sharing
-
Re: Macbook A1708 - 820-00840 20v 50ma
Had so many of these boards be the audio capacitors shorting...just need to test each one .
C6465
C6445
C6405
C6425
C6481...
Leave a comment:
-
Re: Mac EFI Toolkit
Awesome... I'll give it a try
Thank you !
Leave a comment:
-
Re: MacBook Air A1466 2017 Operating Very Slow
I have also seen super slow running 2014 / 2015 Airs ....clients running Mojave or Catalina.
Re-install of OS extremely slow .
fully booted Mac with Chrome launched does about 20 bounces before showing. Disk speed test runs normally . No high fan or sensor issues. lots of free disk space / No virus etc.
Installation of Big Sur resolve's problem...
Leave a comment:
-
Re: MacBook Air A1466 2017 Operating Very Slow
I have had super slow A1466 820-00165 caused by battery used from 2011 Air ....also some SSD from 2013 model will cause super slow [Toshiba] when used on 2015+Last edited by spidertnt; 08-20-2023, 05:11 PM.
Leave a comment:
-
Re: Macbook Pro 15" A1707 820-00928-04 no chime,no boot,no image 19.92v 0.900a
second picture looks like possible burnt pins on the flex display connector ?...when this happens the screen side connector also needs replacement.
The burning usually damages the GMUX chip and it will also need replacement ....Last edited by spidertnt; 08-06-2023, 11:18 AM.
Leave a comment:
-
Re: MacBook Pro 16” M2 Max help
check the hinge angle sensor for corrosion ...it will cause some of those symptoms
flickering screen / black screen / keyboard not working etc.
Leave a comment:
-
Re: MacBook Air 1466 Internal SSD not detected
I struggled with 820-0165 Air ...liquid damage that would not see SSD ...tried clean bios etc.. gave up.
Months later i had been upgrading customers to NVME using adapters . I tried using NVME on it and it worked fine ...detected and worked with no issue . Tried original Apple SSD again no go.
Leave a comment:
-
Re: MacBook Pro 16” 2019 Boots installs os Catalina but won't install Ventura or lowe
How did you install Big Sur ? ....from USB installer .
I thought Apple stopped allowing USB installing of OS since T2 chip ...only allowing internet recovery mode for OS installs.
You can install older OS using DFU mode and IPSW files
watch this [url]https://www.youtube.com/watch?v=q-FsB2onSx0&t=1s[/url]
Link to files
[url]https://mrmacintosh.com/apple-silicon-m1-full-macos-restore-ipsw-firmware-files-database/[/url]Re: MacBook...
Leave a comment:
-
Re: T2 and DFU firmware reflashing
yes ..i forgot you will need to do DFU restore after swap . it should also fail but possible the the screen will post before failure .
also possible voltage stays at 5v needing DFU to restore back to 20v...
Leave a comment:
-
Re: T2 and DFU firmware reflashing
You can use any Macbook to restore using DFU mode ....I use a Mac Pro 5.1 from 2010.
I use this cable
[url]https://www.amazon.ca/gp/product/B010SFDKC6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1[/url]
You will need a working chassis to place the logic board in...so you can use keyboard commands to get into DFU mode
----------------------------------------------------------------------------------------------------------------------------------
Programming the T2 chip manually with...Last edited by spidertnt; 05-25-2023, 06:55 PM.
Leave a comment:
No activity results to display
Show More
Leave a comment: