Yes, I can take other resistor to from other bad board....but I've never done this
If I found an exact 430k resistor as in schematic for PR1031, that would be much better...
I've on ACDET PR1032 with 38 kohm and PR1031 with 38 kohm measure to ground
If I measure resistor PR1032 I have 49 kohm and on PR1031 247 kohm, on schematic I should have on PR1031 430 kohm
[url]https://www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-laptops-tablets-and-mobile-devices/schematic-requests-only/3155228-hp-gaming-16-dag3jbmb8d0-rev-d[/url]https://Yes, 19v5 stable.<br />
<br ...1032 I have 49...
Yes, I've checked with official HP AC Adapter, but not changing....same 1.9v , I also measure 2 resistor connected on ACDET line and they are OK, I also have a capacitor, I would to try remove it ?
Hi friend, I've this notebook HP Gaming 16-a0006nl with QUANTA DAG3JBMB8D0 that won't power on.
I start checking first mosfet and they seems to be ok.
On power button I get 3 that go to 0 on pressing, and come to 3v on release.
After I check charge ic that is BQ738H
I write here measure with battery and ac
Re: New Members - please post your introductions here
Hello friends!
I introduce myself, my name is Francesco and I'm from Italy, I'm passionate about computers and electronics. I work as a computer repair technician, I am proud and proud to have discovered this forum and its valuable utility formed by experts in the field with experience in difficult problems.
I am sure I have finally found a good reference point where I can begin to clarify some doubts and take part to the help of problems already common to those who need it.
Leave a comment: