Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Thank you, i will proceed and find a donor board...
-
-
Xbox series x advise
[FONT=Calibri]Hi [/FONT]
[FONT=Calibri]I was hoping someone could give me some advise. A friend dropped off an Xbox Series X for repair—normally not something I deal with, but I'm helping out as a favour.[/FONT]
[FONT=Calibri]Currently, the console powers on with a beep and then immediately powers off. On closer inspection, the HDMI port clearly needs replacing, and there's significant liquid damage/ missing components.[/FONT]
[FONT=Calibri]Before I go down the rabbit hole of sourcing a donor board and replacing damaged components, I wanted to ask: based...
-
Would this be ok as an alternative?
[url]https://www.aosmd.com/sites/default/files/res/datasheets/AON7380.pdf[/url]https://Would this be ok as an alter...7380.pdf[/url]
Leave a comment:
-
Help in identifying a MOSFET - ASUS ROG GU603Z
I have a ROG here which isn't charging and found 2 MOSFETS to be faulty with no schematics available only board view. I need help in finding a replacement (equivalent)
The markings are G4 GUB and under this it says 2Y2701. I've tried googling this but no joy.
Can anybody shed some light on where to get them from or an equivalent.
Thanks
​...
-
-
Is it possible for someone to change the service tag for me? I've tried the bios in post 3 and it's working fine but the customer wants the same service tag as before.
Service tag needed is CC20SL3
Thank you​...
Leave a comment:
-
-
Is it possible to change a service tag? I've tried the bios in post 2 and it's working fine but the customer wants the same service tag as before (Not sure why)
His service tag is BK409S3 and the one used in post #2 is 4WBWHS3
If this isn't possible here is the original damaged BIOS file.
Thank you...
Leave a comment:
-
Mon2 thank you so much. So i've had a look at the datasheet and the resistors that are missing are from pin 4,5 VDIO, VCLK to the CPU.
Still not sure what the values of them would be.
Anyone would like to have a guess or do i just put 0hms in there.
[ATTACH=JSON]{"data-align":"none","data-size":"large","data-attachmentid":3529122}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"large","data-attachmentid":3529123}[/ATTACH] [ATTACH=JSON]{"data-...
Leave a comment:
-
Help in identifying a component - HP 15-cs3009na DAG7BLMB8D0
A shop changed the fan on the above and it stopped booting so they sent it to me. All I get is 5 long 3 short flashes on the CAPS lock. I tried flashing the bios and EC chip still the same and then i noticed 3 components missing (2 x resistors and a capacitor) from near to the fan connector.
I've checked and there is not schematics available for this model, so I need help in finding out what the values are of the 2 resistors are, I'm not that bothered about the capacitor. I know that's going to be very difficult unless someone has a donor/working motherboard so i thought i would try...
-
That's a completely different board to what i have. Mine is DAG7BLMB8D0 REV: D and it's a HP Pavilion 15-cs3009na...
Leave a comment:
-
Hi,
Make & Model : HP Pavilion 15-cs3009na
Serial: 5CD0488VMP
BIOS request for the above model, I'm getting 5 long 3 short on the CAPS. Original attached.
Thank you...
Leave a comment:
-
My understanding is that these boards don't have the T2 and are not similar to the CD3215. I took it upon myself to swop from an icloud locked board, all 4 CD3217 in the correct order along with the ROM's as explained on this page [url]https://logi.wiki/index.php/CD3217_and_T2_Power_on_Sequence[/url] and it is still fluctuating.
I've spent enough time on this now so it's become another donor or until someone else gets and fixes the same issue.https://My understanding is that the... icloud locked
Leave a comment:
No activity results to display
Show More
Leave a comment: