Announcement

Collapse
No announcement yet.

Badcaps Electronics Repair Forum & Schematic Search

Collapse
 
  • Filter
  • Time
  • Answered
  • Show
  • New Topics
Clear All
new posts
No content found
Show More
 
  • Filter
  • Time
  • Show
  • New Topics
Clear All
new posts
Please log in to your account to view your subscribed posts.
Directory Topics Posts Last Post
Badcaps Capacitor & Electronics Repair Forum
Frequently Asked Questions (No Posting)
All new members, PLEASE READ HERE FIRST! Posting only allowed by established members.
Topics: 45 Posts: 733
45 733
Announcements & Related News
Site announcements, capacitor-related news, and anything relavant you might think of... Got News? POST IT!!
Topics: 235 Posts: 42,512
235 42,512
Document & Software Archive
Common Parts Library - Datasheets
Share or download datasheets or application notes for electronic components and other parts. Contribute your knowledge or ask questions. Before using please read our Terms of Service.
Topics: 2 Posts: 5
Last Post: ncp81208 datasheet
2 5
BAKEEL1990
General Topics
General Capacitor Questions & Issues
Questions and answers for identifying whether your device has bad capacitors. Also post general capacitor-related questions and issues here.
Topics: 3,195 Posts: 32,741
3,195 32,741
General Computer & Tech Discussion
Have just a general computer question, post it here. This can be anything from an OS issue, hardware issue not related to capacitors, upgrade question, or whatever basic tech-related issue is on your mind.... This is also a good place to share your tech projects!
Topics: 4,507 Posts: 74,896
4,507 74,896
Troubleshooting Hardware & Devices and Electronics Theory
General Electronics Technical Discussion
If you have a general question concerning basic electronics theory or component function & usage, here's where it goes.
Topics: 3,996 Posts: 44,542
3,996 44,542
Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
Technical discussions covering any type of desktop motherboard, video/graphics card, controller card, or whatever other desktop peripheral you need help with. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 6,900 Posts: 37,720
6,900 37,720
Sub-Forums:
Troubleshooting & Designing Networks
Post your computer network questions, ideas, gripes, and so on in here. This can be any type of network, whether its cabled, wireless, or whatever. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 502 Posts: 5,458
502 5,458
Troubleshooting Laptops, Tablets, and Mobile Devices
Technical discussions covering any type of laptop, notebook, netbook, tablet, or smartphone. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 32,290 Posts: 308,912
32,290 308,912
Sub-Forums:
BIOS Requests ONLY! (12,876/156,245)
Schematic Requests ONLY! (4,820/28,884)
Troubleshooting Computer Displays
Technical discussions covering any type of PC/computer display, whether it be CRT, LCD, or anything else. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 5,332 Posts: 75,746
5,332 75,746
Troubleshooting TVs and Video Sources
Technical questions about your defective television, projection screen, LCD/plasma, or any other type of video device. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 27,509 Posts: 375,325
27,509 375,325
Diah
by Diah
Troubleshooting Power Supplies and Power Supply Design
Technical discussion for power supplies. This covers PC supplies, and any other related power supply issue. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 4,197 Posts: 65,359
4,197 65,359
Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
Technical questions about your defective laser or ink printer, plotter, copier, scanner, and other imaging & printing devices. This section also includes digital cameras. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 307 Posts: 1,689
307 1,689
Troubleshooting Audio Equipment
Technical discussion on audio equipment troubleshooting and installation. This can be anything from a home/car stereo, guitar amp, and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 2,343 Posts: 27,607
2,343 27,607
Troubleshooting Appliances and other Household Electronic Stuff
Technical discussion on household appliances & other household electrics & electronics; including troubleshooting and installation. This can be anything from a washer/dryer, dishwasher, microwave oven, other sordid kitchen electrics and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 227 Posts: 3,940
227 3,940
Troubleshooting Game Consoles & Other Weird Devices
This can be anything from game consoles to arcade games to anything else that doesn't really fit into any of the above categories. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 1,022 Posts: 10,985
1,022 10,985
Equipment Usage, Soldering, Techniques, and Reviews
Technical discussions concerning soldering techniques, usage of test equipment, how it works, what's best, and some pointers in using it all.
Topics: 1,382 Posts: 19,500
1,382 19,500

What's Going On?

Collapse

There are currently 335315 users online. 4202 members and 331113 guests.

Most users ever online was 1,342,976 at 10:51 PM on 04-26-2024.

Badcaps Statistics

Collapse

Topics: 102,958   Posts: 1,276,935   Members: 498,884   Active Members: 17,945
Welcome to our newest member, Squall-W.

Latest Topics

Collapse

  • Nova10
    Lenovo thinkbook 14 g2 itl not charchig
    by Nova10
    Hallo frind , i have [B]Lenovo thinkbook 14 g2 itl not charging ! the display backlight go on and off.
    can enybody help wich chip is caus this isue.
    Thanks[/B]

    Hallo frind , i have [B]Lenovo thinkbook 14 g2 itl not charging ! the display backlight go on and off.
    can enybody help wich chip is caus this isue.
    Thanks[/B]

    Hallo frind , i have [B]Lenovo thinkbook 14 g2 itl not charging ! the display backlight go on and off.
    can enybody help wich chip is caus this isue.
    Thanks[/B]

    05-24-2024, 05:14 AM
  • mrsdsdsdsd
    4G LTE router sim socket replacement
    by mrsdsdsdsd
    hi everyone i hope you all doing well.
    i'm trying to replace a sim socket in my 4g router, i found similar parts on aliexpress and i'm not sure if it will work on my device (Huawei b593s-22)
    here's the original one:
    [URL=filedata/fetch?id=3282749&d=1717353741][ATTACH=JSON]{"alt":"Click image for larger version Name:\thuawei_b593s-22_back_inside.jpg Views:\t0 Size:\t233.6 KB ID:\t3282749","data-align":"none","data-attachmentid":"3282749","data-size":"medium"}[/ATTACH][/URL]

    and here's...
    06-02-2024, 12:49 PM
  • Nicktronic
    Sony XBR-52LX900 BL_ERR
    by Nicktronic
    Hi all, just curious if the BL_ERR signal is active high or low? TV has the 6 blink error code and I've changed the backlights as they tested questionable (4 strips tested - 203VDC, 203VDC, 203VDC and 175VDC). The new strips all tested at 175VDC. Now when I turn it on, it tries twice to come up and then the 6 blink code. During the this time the BL_ERR pin is high and drops low momentarily, then does it again on the 2nd try to boot (so Im assuming active low). The other thing is the backlight voltage ramps to ~280VDC from around ~160VDC and then back down as the TV tries to boot again. Does...
    Yesterday, 07:30 PM
  • x_orange90_x
    Pioneer PN50951-22U Backlight On, No Image
    by x_orange90_x
    I get backlights that stay on not there is no image. The tv does not automatically power on when plugged in either which I generally see happen when there is a fault. It responds as it should to the power button.

    I checked the test points on the TCON and I have proper voltages except for at 1P15V. I don't know if that is supposed to be 15V or 5V, but either way I only get 1.134V on that point. I have 12V, 8V, VCC, and a small amount on the CKV point.

    I tried heating up the SoC on the main board but that made no difference. Disconnecting either ribbon from the TCON also...
    06-01-2024, 08:55 PM
  • cheeky2
    Anyone know how to take apart a Fluke T100 Voltage Tester without damaging it?
    by cheeky2
    See attached picture. I have a Fluke T100 Voltage Tester that the resistance and diode measurement isn't working (it's not the batteries (as I have already checked them and put decent Duracell 1.5V AAA batteries inside it).
    I have looked on the web for any information and on youtube without any results for this model.
    There are no screws visible or anything obvious. So I am hoping someone here has the solution to take it apart?
    The only way I can see is underneath the yellow rubber handle area, however I don't wish to damage it if it isn't the case!...
    Today, 07:21 AM
  • duranayar
    MSI MS-15811 need resistor value
    by duranayar
    Hello. If anyone has it and can measure 2 resistors next to the battery integrated circuit, I would be very grateful.
    ​...
    05-18-2024, 03:50 AM
  • Sraros
    DELL Inspiron 3477 AIO
    by Sraros
    Hello,
    I post this in this section for a Dell Inspiron 3477 All in one as the motherboard is more close to a laptop one.
    So, the issue is that whatever adapter I use, I get this screen when it starts up. I tried aftermarket adapters and original HP adapters, both 65W and 90W. Minimum requirement is 65W.
    I don't have its authentic Dell adapter as I took it for free in case I manage to repair it, but the HP ones I think are pretty much identical.

    First thing I checked is if the dc jack on the board has an issue but with the MM I see all three pins, ground, 19.5V and...
    Today, 10:52 AM
  • soleiman.osmani
    Remove password acer travelmate 6495T
    by soleiman.osmani
    Please remove BIOS password🙏🙏🙏🙏

    10308-1M...
    Today, 01:20 PM
  • mo000
    MSI B660 MORTAR NO DISPLAY
    by mo000
    Hi!
    MSI B660 MORTAR MS-7D42
    the problem start when the client broke some capacitors and resistors in Back of the motherboard​ under PCH
    i put them back but
    same thing
    motherboard power on with no display after press the pwr button power on with dram led and restart and power on again with red cpu led
    cpu vcor looks good no short and cpu heat up but after second restart not heating
    i found 2 shorted transistor near to KBC but i doubt if that normal short or not (connected to AGND AND AMDSIC)
    other technicien flash the bios but same thing ....
    Yesterday, 12:45 PM
  • Omron
    I want to dim light bulb by 50% I want to learn how to calculate it on my own
    by Omron
    I have a 5W lamp on 12Volts battery, I want it to be half as bright, so I will add a resistor. What resistor should I supply?

    A = W = 5 = 0.416mA
    _ _
    V 12


    R = V = 12 = 28.84 Ohms (R) this is resistance of lamp
    _ _____
    I 0.416

    So I will add one resistor 28.84 Ohms

    I will have 28.84 + 28.84 = 57.6 Ohms

    Or 28.84 + 28.84 = 14.42 Ohms

    I don't know if it will work in series or in parallel
    voltage would be 6V and amp current mA = 0.208mA We divide everything by two

    W= V * I...
    Today, 01:58 AM

Trending

Collapse

  • Sraros
    DELL Inspiron 3477 AIO
    by Sraros
    Hello,
    I post this in this section for a Dell Inspiron 3477 All in one as the motherboard is more close to a laptop one.
    So, the issue is that whatever adapter I use, I get this screen when it starts up. I tried aftermarket adapters and original HP adapters, both 65W and 90W. Minimum requirement is 65W.
    I don't have its authentic Dell adapter as I took it for free in case I manage to repair it, but the HP ones I think are pretty much identical.

    First thing I checked is if the dc jack on the board has an issue but with the MM I see all three pins, ground, 19.5V and...
    Today, 10:52 AM
  • soleiman.osmani
    Remove password acer travelmate 6495T
    by soleiman.osmani
    Please remove BIOS password🙏🙏🙏🙏

    10308-1M...
    Today, 01:20 PM
  • Omron
    I want to dim light bulb by 50% I want to learn how to calculate it on my own
    by Omron
    I have a 5W lamp on 12Volts battery, I want it to be half as bright, so I will add a resistor. What resistor should I supply?

    A = W = 5 = 0.416mA
    _ _
    V 12


    R = V = 12 = 28.84 Ohms (R) this is resistance of lamp
    _ _____
    I 0.416

    So I will add one resistor 28.84 Ohms

    I will have 28.84 + 28.84 = 57.6 Ohms

    Or 28.84 + 28.84 = 14.42 Ohms

    I don't know if it will work in series or in parallel
    voltage would be 6V and amp current mA = 0.208mA We divide everything by two

    W= V * I...
    Today, 01:58 AM
  • cheeky2
    Anyone know how to take apart a Fluke T100 Voltage Tester without damaging it?
    by cheeky2
    See attached picture. I have a Fluke T100 Voltage Tester that the resistance and diode measurement isn't working (it's not the batteries (as I have already checked them and put decent Duracell 1.5V AAA batteries inside it).
    I have looked on the web for any information and on youtube without any results for this model.
    There are no screws visible or anything obvious. So I am hoping someone here has the solution to take it apart?
    The only way I can see is underneath the yellow rubber handle area, however I don't wish to damage it if it isn't the case!...
    Today, 07:21 AM
  • Péter Fodor
    Steelshock 4 v2 controller
    by Péter Fodor
    I have got an Steeldigi Steelshock 4 v2 controller won't draw any amp from outlet.
    I have disassembled and removed the battery. I have tied to measure some points. The usb connector shows 5 volts. There are test points and shows 5 volts everywhere it should. The battery connector in diode mode shows 0.009v is it ok?

    There is an U4 chip place, but no chip, between the battery connector and the charging port.

    How should I progress to identify the problem?

    Can anyone help me with this?...
    Yesterday, 11:20 PM
  • chinh
    Asus UX562UG R2.1 bios
    by chinh
    I need asus zenbook bios motherboard is UX562UG
    R2.1
    here is my old bios...
    Today, 12:48 AM
  • spaisik
    help with the gigabyte g7 ke bios
    by spaisik
    help with the gigabyte g7 ke bios, after turning on the fans turned on to full and the laptop itself turned off, I decided to take it from the off site and run it through the utility after 35 percent of the download, the laptop turned off and now it is clear that there is no initialization, maybe someone has a dump for this miracle I will be very grateful
    Today, 09:59 AM
  • odtech
    Asus K52JK SX092X - Bios request
    by odtech
    So I have this ASUS K52JK which cpu overheats seconds after power on even while idling at the bios menu. The laptop works although it does throttle the cpu.

    I was attempting to clean the bios and accidentally lost my original bios dump.K52JR found on badcaps does work but has the same issue with cpu overheating.
    Can anyone post a bios dump for this laptop?

    Edit
    Laptop: ASUS K52JK
    Mainboard: K52JR Rev2.0
    Radeon GPU 1Gig
    S/N: A4N0AS44636916C...
    Today, 12:39 PM
  • porfyriadhs
    Vestel tv inverted colours
    by porfyriadhs
    Hello I have changed the Main board of a vestel tv with same board but colors are inverted can someone explain me why?...
    Today, 02:39 AM
  • x_orange90_x
    Pioneer PN50951-22U Backlight On, No Image
    by x_orange90_x
    I get backlights that stay on not there is no image. The tv does not automatically power on when plugged in either which I generally see happen when there is a fault. It responds as it should to the power button.

    I checked the test points on the TCON and I have proper voltages except for at 1P15V. I don't know if that is supposed to be 15V or 5V, but either way I only get 1.134V on that point. I have 12V, 8V, VCC, and a small amount on the CKV point.

    I tried heating up the SoC on the main board but that made no difference. Disconnecting either ribbon from the TCON also...
    06-01-2024, 08:55 PM
Working...
X