porfyriadhs
Senior Member
Last Activity: 07-07-2026, 12:06 PM
Joined: 10-17-2023
Location: ΠΑΛΑΙΟ ΦΑΛΗΡΟ
-
Samsung ue50mu6122 no power
Hello I have problem with a Samsung tv model ue50mu6122 was hit by thunder and now is not working. No standby light nothing -
Leave a comment:
-
Sony kd-65xd7505 flickring
Hello the tv is Sony 65" flickering . I tried my best by taping the corner of the ribbon one by one. Nothing changes anyone knows if there is another way to solve the issue?... -
Hello i am looking for firmware for sony kdl-50w756c. ThanksLeave a comment:
-
Unfortunately I did anything mentioned at most cases and the problem goes on 😔Leave a comment:
-
Leave a comment:
-
Samsung QE60Q60BAU No display
Hello everyone, I have a Samsung QE50Q6BAU
The TV powers on normally and the backlight turns on, but there is no picture at all (no logo, no OSD, no image).
So far:
Backlight works
No display
I suspect a possible T-CON, panel, or main board issue, but I’m still diagnosing.
Any suggestions on where to start or what to check first?
Thanks in advance.... -
Leave a comment:
-
Qe49q60rat Vertical bars
Hello everyone,
I have a Samsung QE49Q60RAT TV that came to me with an on/off (boot loop) problem.
While troubleshooting, I tried the tape method on the panel ribbons to isolate the fault.
I noticed the following behavior:
With one ribbon cable connected, the TV powers on and shows a picture, but there are vertical bars/lines on the left side of the screen.
With the other ribbon connected, the behavior is different (no picture / unstable).
This makes me suspect either a panel/tab bonding issue or a T-CON/panel driver fault, but I'm not completely sure.
... -
Leave a comment:
-
Lg 55 nano
Hello I got a lg 55 nano. I did change backlight and diffuser but when I re install the panel o got vertical bar. What could be happen?... -
Thank you very much
The tv is working 🙂🙂Leave a comment:
-
I insert the usb and install the software. Waited for some time and the the tv shut down. I remove the usb and I open from Main button. It stuck on logo with red stand by light flashing...Leave a comment:
-
So do i open the file and paste to the usb ?Leave a comment:
-
Leave a comment:
-
Leave a comment:
-
Philips 55pus7304/12 stuck on boot logo
Hello friends I need your help. I have a Philips 55pus7304/12 stuck on boot logo. Tried update via usb with no luck maybe wrong file dont know. Any one who knows about this situation will be helpfull. Thanks... -
Man I tried everything. The board came out from a broken 40" Samsung tv. 😵😵😵Leave a comment:
-
Is it the right label?...
Leave a comment:
No activity results to display
Leave a comment: