MarkRocket
Member
Last Activity: 05-08-2026, 03:49 AM
Joined: 01-20-2020
Location: Southampton
-
Thank you very much Saiyaman45, what program is used to open the PCB files, I have RIMU for Windows, but it errors saying it can't open the file -
Yes, or course use schematics, but I personally don't have them and didn't realise they were available.Leave a comment:
-
list of PS5 Internal Fuses
This is not a definitive list, and I do not claim if it is 100% accurate so please do your own research, based on the information from littlefuse, RS, Farnell and a few other places, using information about the markings on the fuses
Please feel free to distribute, amend, correct, etc... -
Well good news, thank you for all the help, the replacement component (SMBJ18CA) has been fitted, no shorts detected, internal fuse ok and unit is now charging again!!Leave a comment:
-
Yes, it does power on but does not charge, there are two 18650 type batteries in this device, both plug in via a two pin connector (the white ones behind the barrel jack, also both the batteries have a two pin connector for I assume temperature that is separate from the power one these are the smaller white connector above the barrel jackLeave a comment:
-
Thanks, I have ordered a couple SMBJ18CA, I will let you know if it worksLeave a comment:
-
The rating of the device is 12V at 2A, I have been doing some research of my own, I think it may be a SMBJ18CA 18V 600W TVS DiodeLeave a comment:
-
Mighty Dry Herb Vaporisor
I have got a faulty Mighty Dry Herb Vaporisor, it fully powers on and works ok, but does not charge the batteries
I have found a shorted components next to the power in jack, it has the logo on it from General Semi, and the marking BT 06A, but I can't ID what the actual part number/model number is to be able to get a replacement
Can any help ID this component please -
Celestron PentaView LCD Digital Microscope
I have two of these microscopes, both take power and the lights for the specimen bed light up but there is not signs of life on the screen, I have checked the power button for the screen and the screen is getting power.
I need help identifying some SMD components on the board
For the first one has a model number of 44348 there is a three legged component (transistor/mosfet) with the marking N011V (Q4 AND Q5 in picture)
The board has several numbers on it but they do not show any meaningful results on Google and I can't seem to find schematics for either of the boards (they...
No activity results to display
Leave a comment: