Hello everyone,

For a project of mine, I need the pinout for the EDP display connector since these aren't universal. It would be nice to have the pinout of the other board connectors as well, so does anyone have any schematics/boardview files of the 8APU1 motherboard that's in the Lenovo Legion Go?

Many thanks in advance 🙂

Hi,

So i got above mentioned laptop. Which shows only some little signs of life.
When i turn it on, 3 buttons lit up and stays like that forever (ESC, Caps Lock and Num Lock), they dont blink, they are just lit all the time. Fan does not spin, and there isnt any heat from CPU.
What ive already done:
-Flashed both bios chips 16 and 8 mb.
-Tried adding another stick of ram
-Check if backlight is faulty.

So any ideas?
Thank you

Hello,
I was in a middle of a bios update and accidently turned my laptop off. Now, my bios is corrupt and I am greeted with a "Do you want to recovery rom part" screen.

Laptop Info:
Yoga Slim 6 14IRP8 - Type 82WV
S/N: YX066EBM
Factory ID: HQ006
MO: YX60B3316019
MTM:82WVCTO1WW
MFG Date: 2023/03/16

Things that I have tried:
- downloaded "LGCN25WW.exe" bios, extracted it, renamed the "WinLGCN25WW.fd" file to "lgcn.bin" and "Fn+R" bios reflashing -> usb bios got recognised...

Hi

I'm trying to upgrade a Lenovo Ideapad Flex 5 from 8Gb of RAM to 16 GB. Sadly, the RAM is soldered to the board. I identified the current RAM as

Micron MT53E512M32D1NP-046 Specs


I was searching, and I found two modules that I think would work.


Option 1 Micron MT53E1G32D2NP-046 Specs


​Option 2 Micron MT53E1G32D2FW-046 Specs​



I would like to hear opinions on whether the options are suitable for the change.​

Thanks in advance for your answers

I have a Lenovo E15 Gen.3, motherboard NM-D481 with a defective USB-C port. The device starts with battery. When connected to the USB-C power supply, it does not start or charge. 20V is present at the input of the UT5 (High voltage USB PD power switch), 0V at the output
UT5 pin 3 (SNK_PS_EN) =0V
RPT3 Pin1+2 LDO 3V3 present
I suspect that the UT2 USB-C power controller is defective because the UT5 is only controlled by the UT2. However, the UT2 supplies on pin 33 (+LDO_3V3) which makes me wonder if it is defective after all. Unfortunately I don't have it here to test it.
...

Please share the schematic or boardview files for this Mainbord. Got a fried chip/device on the mainboard, and would like to fix it, and check the other both near the fried chip too.
I need to know the model and type of this fried device. Its maybe an capacitor, but am not sure.

Thank you very much!...

Hi please somebody can help me with this bios

Marca: Lenovo
Modelo: Legion 5 Pro 16ACH6H
Bios Chip: Wisbond 74M12JWSIQ
Mainboard Model: HY660 HY601 HY561 HY572 HY56C HY57K NM-D562 Rev: 3.0
Date fab: 2021
Sn: PF3BAAFT
MTM: 82JQ00FEUS

Hi, everyone.

I have this notebook that won't charge.
In Windows, the charger icon doesn't appear on the battery, but the charger turns on the notebook normally.

PU301:

Pin 5 (ACOK) - 5.97v
Pin 6 (ACDET) - 1.83v (should have 2.6)
Pin 16 (REGN) - 6v

PQ308 has no gate voltage, so it doesn't drive PQ309 low

With the battery connected, its voltage goes the reverse way to the jack, having 14v and not 20v:

PQ301 e PQ302

Pinos 1,2,3 14v

Pino 4 5v

Pinos 5,6,7,8 com 14v...

Hello everyone, I have an HP 840r G4 whose BIOS I reprogrammed, and when I turn it on, it takes a long time to boot up. This is not normal. Can you help me find the correct file? I've attached the original BIOS file.
SN: 5CG9184J31
Please help me.​...

Hello,

I have a Lenovo Legion 7 with the following specs:

• RTX 3080
• Ryzen 9 5900HX

A problem started suddenly overnight. The next morning, the laptop wouldn't boot properly — the RGB lighting on keyboard turned on, fans spun for a brief moment, but the screen remained black, and the Caps Lock key didn't respond (no indicator light).
When running on battery power, the laptop would stay in this state for about 35 seconds before automatically shutting off. When plugged into AC power, it would keep restarting every 35 seconds. Holding the power button would shut it down, but...

Does anyone have the manual/datasheet for how to control fan speed for this io chip found in lenovo ideapad notebooks :

ITE IT8586E http://www.ite.com.tw

thank you for any clues

​

Lenovo G565 Laptop onboard LCD Display does not turn on.
Only works with external Monitor.
I am trying to verify that the LCD signals from the motherboard are ok.
The LCD was working, but over time happened to not turn on more frequently.
Now dead.
Possibly the cable from MB to LCD is broken somewhere.

I just wonder how it is detected if external or internal monitor shall be activated ?

I found the following schematic on the net:


Problem 2:
The graphics chip ATI Mobility Radeon HD5470 seems defective.
On Win7...

hi,

unit is a : Lenovo ThinkPad E14 Gen 2 GE4B0 motherboard with the infamous QB6 mosfet de soldering off the board, however the usb c port was replaced by another shop not know the common issue. I replaced the qb6 with a AON7466 however the UB7 started to get really hot and unit would not turn on. I then replaced the UB7 and QB5. I now get 0V on VINT20_IN_F and VINT20_IN on both sides of F6106, however when I inject 12v on either side the unit boots up. Can this be an issue with the USB-C port not soldered properly? I so get 20V 0.039A on the usb-c meter. ...

Hello everyone,

I need a BIOS for the Thinkpad L13 Yoga Gen 4.
S/N: PW05KQH7
Type Number: 21FR-0005GE

A recent BIOS update from Lenovo has bricked the laptop.
Currently there is no charging light.
According to Lenovo's website, the BIOS version R26ET41W/EC R26HT28W (r26uj08w) has been withdrawn due to issues with the system failing to power on after the BIOS/EC update.