my g513rc was doing a windows update and it had a bios update in it, the system rebooted, was doing something rebooted again, and hasnt functioned properly since..
ive researched reparing my bios, i have a ch341a black with 1.8v adapter, ive made 4 seperate dumps at different times for redundancy...
i have a feeling my bios is corrupted and preventing my system from booting..
does anyone have a g513rc bios dump i can test ???
or is anyone willing to help me out in another section with fixing my dumps ??
No content found
Please log in to your account to view your subscribed posts.
| Directory | Topics | Posts | Last Post | |||
|---|---|---|---|---|---|---|
| Badcaps Capacitor & Electronics Repair Forum | ||||||
|
Frequently Asked Questions (No Posting)
All new members, PLEASE READ HERE FIRST! Posting only allowed by established members.
Topics: 45
Posts: 733
|
45 | 733 |
|
|||
|
Announcements & Related News
Site announcements, capacitor-related news, and anything relavant you might think of... Got News? POST IT!!
Topics: 235
Posts: 41,726
|
235 | 41,726 |
|
|||
| Document & Software Archive | ||||||
|
Common Parts Library - Datasheets
Share or download datasheets or application notes for electronic components and other parts. Contribute your knowledge or ask questions. Before using please read our Terms of Service.
Topics: 1
Posts: 3
Last Post:
ncp81208 datasheet
|
1 | 3 |
|
|||
| General Topics | ||||||
|
General Capacitor Questions & Issues
Questions and answers for identifying whether your device has bad capacitors. Also post general capacitor-related questions and issues here.
Topics: 3,183
Posts: 32,689
|
3,183 | 32,689 |
|
|||
|
General Computer & Tech Discussion
Have just a general computer question, post it here. This can be anything from an OS issue, hardware issue not related to capacitors, upgrade question, or whatever basic tech-related issue is on your mind.... This is also a good place to share your tech projects!
Topics: 4,494
Posts: 74,813
|
4,494 | 74,813 |
|
|||
| Troubleshooting Hardware & Devices and Electronics Theory | ||||||
|
General Electronics Technical Discussion
If you have a general question concerning basic electronics theory or component function & usage, here's where it goes.
Topics: 3,966
Posts: 44,292
Last Post:
Solder joints on heat sinks matter?
|
3,966 | 44,292 |
|
|||
|
Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
Technical discussions covering any type of desktop motherboard, video/graphics card, controller card, or whatever other desktop peripheral you need help with. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 6,799
Posts: 37,215
|
6,799 | 37,215 |
|
|||
|
Sub-Forums:
| ||||||
|
Troubleshooting & Designing Networks
Post your computer network questions, ideas, gripes, and so on in here. This can be any type of network, whether its cabled, wireless, or whatever. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 500
Posts: 5,437
|
500 | 5,437 |
|
|||
|
Troubleshooting Laptops, Tablets, and Mobile Devices
Technical discussions covering any type of laptop, notebook, netbook, tablet, or smartphone. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 31,787
Posts: 302,963
Last Post:
Dell Latitude 5520 Bios Password unlock
|
31,787 | 302,963 |
|
|||
|
Sub-Forums:
| ||||||
|
Troubleshooting Computer Displays
Technical discussions covering any type of PC/computer display, whether it be CRT, LCD, or anything else. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 5,319
Posts: 75,686
Last Post:
Dell 2709w No power
|
5,319 | 75,686 |
|
|||
|
Troubleshooting TVs and Video Sources
Technical questions about your defective television, projection screen, LCD/plasma, or any other type of video device. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 27,435
Posts: 374,541
Last Post:
SAMSUNG HG40ED450BW Striping Picture
|
27,435 | 374,541 |
|
|||
|
Troubleshooting Power Supplies and Power Supply Design
Technical discussion for power supplies. This covers PC supplies, and any other related power supply issue. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 4,178
Posts: 65,207
|
4,178 | 65,207 |
by r2digital
Yesterday, 08:20 PM
|
|||
|
Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
Technical questions about your defective laser or ink printer, plotter, copier, scanner, and other imaging & printing devices. This section also includes digital cameras. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 301
Posts: 1,665
Last Post:
Epson l3110 dump
|
301 | 1,665 |
|
|||
|
Troubleshooting Audio Equipment
Technical discussion on audio equipment troubleshooting and installation. This can be anything from a home/car stereo, guitar amp, and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 2,317
Posts: 27,425
|
2,317 | 27,425 |
|
|||
|
Troubleshooting Appliances and other Household Electronic Stuff
Technical discussion on household appliances & other household electrics & electronics; including troubleshooting and installation. This can be anything from a washer/dryer, dishwasher, microwave oven, other sordid kitchen electrics and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 221
Posts: 3,895
Last Post:
Saeco SG200E Coffee Machine
|
221 | 3,895 |
|
|||
|
Troubleshooting Game Consoles & Other Weird Devices
This can be anything from game consoles to arcade games to anything else that doesn't really fit into any of the above categories. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 999
Posts: 10,863
Last Post:
PS4 pro BLOD broken component
|
999 | 10,863 |
|
|||
|
Equipment Usage, Soldering, Techniques, and Reviews
Technical discussions concerning soldering techniques, usage of test equipment, how it works, what's best, and some pointers in using it all.
Topics: 1,376
Posts: 19,373
|
1,376 | 19,373 |
|
|||
-
Yesterday, 11:48 AM
-
Please help sir, I included a schematic of the T490 nm-b901 completely dead, after I checked, I lost the voltage -PWRSHUTDOWN 0v which should have been 3.3v, which was produced by the BD4179MWV chip, thank you
F9502 20v
UTE1B
pin 44 TE_BAT_VOLT 12v
oin 43 3SW_OFF# 19.8v
pin 45 VREGIN20 19.8v
pin 47 VCC3SW 3.3v
pin 55 SHUTDOWNIN# 3.3v
pin 54 TH_DTCT 3.3v
-PWRSHUTDOWN missing 0v resistance 380k
R9512 pin 2 3.3v pin 1 0v resistance 380k
...Today, 08:25 AM -
Hi,
solder joints on heat sinks - how much do they matter? Could poor joints on heat sink cause issues if they are not properly joining to hot ground?
I'm looking at power source module of Panasonic plasma TV and I see many of these having visually poor quality, but could they matter? In general I would guess no, but I saw a video where someone was stressing out the importance of tightening the screws when fastening the power source board specifically for the ground to be connected properly.
ThanksToday, 04:38 AM -
Hi, I'm asking for help identifying the component.. the markings on the smd are totally destroyed and boardview didn't help me much.. I didn't find the schematic ....Thanks!Today, 04:39 AM
-
Looking to up my game a little bit, but these programmers seem a bit daunting.
Trying to get a device for EMMC repair, and it's very difficult to lookup all the words to find if I'm on the right track lol.
Trying to reprogram EMMC on Sony/Hisense mainly but would like to hit a few other brands.
My question is would either of these work? And is there a specific card reader I need for TV emmc? There is like 10-40 additional pieces that I can get but not sure what I actually need for my application only.
I may do eeprom as well. Can someone point...04-21-2024, 08:18 AM -
Evening all,
Long time no post!
I have a UE49NU7100K here with the classic melted diffuser and damaged backlight from getting too hot. Locally there is a UE49MU6470 available which I could pick up to replace the melted diffuser. Would this work or am I missing something? They look like the same style of backlight.
If this sounds good, where is the best place to buy a new backlight? Will I regret buying from Aliexpress?
Thanks in advance for any help04-04-2024, 03:34 PM -
Hi guys,
I have another problematic laptop here, a Dell Latitude 7420 2-in-1 with touch display.
Motherboard is Compal LA-K371P Rev.3.0.
The laptop has a strange display problem, see attachment for more details. This problem is not windows related, as soon as you start the display has those lines even in the Bios. If i attach an external monitor, the lines do not appear there.
I was able to get my hands on a second display, but the problem persists, so it seems to be something different.
any ideas?...Today, 07:33 AM -
Looking for a BIOS for HP 255 G8 (HPL51 LA-L021P).
The main problem is that the laptop will crash while booting to OS. Will crash even on booting from USB, like a Ubuntu or to a Windows 11 installer.
Before junking the board I would try the new BIOS if it does anything.
Thank you!...04-24-2024, 10:03 AM -
A2442 hinge sensor has liquid damage, not possible to repair, is there any alternate?...04-26-2024, 03:26 AM
-
I downloaded a BIOS file from Lenovo and once I extracted the actual BIOS from the executable, it is 16MB in size, but my IC(Winbond 25Q80DV) is only 8MB in capacity. I have read you can trim the BIOS file with a hex editor but I can't find any instructions on specifically what you will remove.Yesterday, 10:55 AM
-
Hi, I'm asking for help identifying the component.. the markings on the smd are totally destroyed and boardview didn't help me much.. I didn't find the schematic ....Thanks!Today, 04:39 AM
-
HI
NEED BIOS DUMP FOR:
[COLOR=#e74c3c]SAMSUNG NP900X3E-K01US AMOR2-13-MONO REV:1.0[/COLOR]
THANKSHI
NEED BIOS DUMP FOR:
[COLOR=#e74c3c]SAMSUNG NP900X3E-K01US AMOR2-13-MONO REV:1.0[/COLOR]
THANKSHI
NEED BIOS DUMP FOR:
[COLOR=#e74c3c]SAMSUNG NP900X3E-K01US AMOR2-13-MONO REV:1.0[/COLOR]
THANKS...Today, 04:21 AM -
Please help sir, I included a schematic of the T490 nm-b901 completely dead, after I checked, I lost the voltage -PWRSHUTDOWN 0v which should have been 3.3v, which was produced by the BD4179MWV chip, thank you
F9502 20v
UTE1B
pin 44 TE_BAT_VOLT 12v
oin 43 3SW_OFF# 19.8v
pin 45 VREGIN20 19.8v
pin 47 VCC3SW 3.3v
pin 55 SHUTDOWNIN# 3.3v
pin 54 TH_DTCT 3.3v
-PWRSHUTDOWN missing 0v resistance 380k
R9512 pin 2 3.3v pin 1 0v resistance 380k
...Today, 08:25 AM -
Hi guys,
I have another problematic laptop here, a Dell Latitude 7420 2-in-1 with touch display.
Motherboard is Compal LA-K371P Rev.3.0.
The laptop has a strange display problem, see attachment for more details. This problem is not windows related, as soon as you start the display has those lines even in the Bios. If i attach an external monitor, the lines do not appear there.
I was able to get my hands on a second display, but the problem persists, so it seems to be something different.
any ideas?...Today, 07:33 AM -
Hi,
solder joints on heat sinks - how much do they matter? Could poor joints on heat sink cause issues if they are not properly joining to hot ground?
I'm looking at power source module of Panasonic plasma TV and I see many of these having visually poor quality, but could they matter? In general I would guess no, but I saw a video where someone was stressing out the importance of tightening the screws when fastening the power source board specifically for the ground to be connected properly.
ThanksToday, 04:38 AM -
Hi all,
I'm facing a issue... hope you could help me. I have a T-CON board BN41-02112A from Samsung 55inch Curve TV.
I have just only 2 status blue LEDs ON since LED3 is off. I have tried to test some test points but VON is NOT OK very close to 0V. Is there someone that can help me on the debugging the issue? I'm supplying the board from an external 12V voltage source.
Thank you in advance.
BR,
Michele
[ATTACH=JSON]{"data-align":"none","data-size":"full","data-attachmentid":3259938}[/ATTACH]...04-25-2024, 12:37 PM -
my g513rc was doing a windows update and it had a bios update in it, the system rebooted, was doing something rebooted again, and hasnt functioned properly since..
ive researched reparing my bios, i have a ch341a black with 1.8v adapter, ive made 4 seperate dumps at different times for redundancy...
i have a feeling my bios is corrupted and preventing my system from booting..
does anyone have a g513rc bios dump i can test ???
or is anyone willing to help me out in another section with fixing my dumps ??Yesterday, 11:48 AM -
Having this very weird issue.
The owner of this laptop complained about screen being intermittent when opening and closing, and has been using the laptop on a thunderbolt video connection since the screen failed.
I swapped with a working screen from an A2141 waiting for parts.
The Os exhibits this weird behavior where it boots to to 1/3 the status bar, then it makes the boop sound. It's at the log in but for whatever reason the desktop isn't loaded.
The laptop boots fine into recovery mode. I updated from Monterey to Sonoma and the laptop still has...Yesterday, 01:37 PM -
PLEASE BROTHERS I NEED DUMP BIOS
SN
SVT511059
MAINBOARD :CP562910-Z3...Today, 05:53 AM -
Everything works as it should except that it is too dark screen image and the backlight is blue is it normal with bleu backlight ?
What Can I Do To Get Brighter Image...Yesterday, 06:42 PM