Hello. Coming to you from the laptop forum. Have a client with the Fortinet 50E that has 320 Mbps as internet input speed but only 20 Mbps output on each and every downstream port (using FAST.COM to benchmark).
Reseller is stating the Fortinet is 'worn out' which does not sound logical at all unless the flash memory is 'worn out'. They, of course, want to sell another + onsite installation fees.
Can anyone share feedback on this unit? What can cause this sluggish behavior. From our knowledge, this device is snooping on the traffic to halt viruses / hack attacks, etc....
No content found
Please log in to your account to view your subscribed posts.
| Directory | Topics | Posts | Last Post | |||
|---|---|---|---|---|---|---|
| Badcaps Capacitor & Electronics Repair Forum | ||||||
|
Frequently Asked Questions (No Posting)
All new members, PLEASE READ HERE FIRST! Posting only allowed by established members.
Topics: 45
Posts: 733
|
45 | 733 |
|
|||
|
Announcements & Related News
Site announcements, capacitor-related news, and anything relavant you might think of... Got News? POST IT!!
Topics: 235
Posts: 41,972
|
235 | 41,972 |
|
|||
| Document & Software Archive | ||||||
|
Common Parts Library - Datasheets
Share or download datasheets or application notes for electronic components and other parts. Contribute your knowledge or ask questions. Before using please read our Terms of Service.
Topics: 1
Posts: 4
Last Post:
ncp81208 datasheet
|
1 | 4 |
|
|||
| General Topics | ||||||
|
General Capacitor Questions & Issues
Questions and answers for identifying whether your device has bad capacitors. Also post general capacitor-related questions and issues here.
Topics: 3,187
Posts: 32,703
|
3,187 | 32,703 |
|
|||
|
General Computer & Tech Discussion
Have just a general computer question, post it here. This can be anything from an OS issue, hardware issue not related to capacitors, upgrade question, or whatever basic tech-related issue is on your mind.... This is also a good place to share your tech projects!
Topics: 4,498
Posts: 74,847
|
4,498 | 74,847 |
|
|||
| Troubleshooting Hardware & Devices and Electronics Theory | ||||||
|
General Electronics Technical Discussion
If you have a general question concerning basic electronics theory or component function & usage, here's where it goes.
Topics: 3,977
Posts: 44,359
Last Post:
trying to identify 10k Slide Potentiometer
|
3,977 | 44,359 |
|
|||
|
Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
Technical discussions covering any type of desktop motherboard, video/graphics card, controller card, or whatever other desktop peripheral you need help with. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 6,821
Posts: 37,351
Last Post:
HP EliteOne 800 G4 TWR
|
6,821 | 37,351 |
|
|||
|
Sub-Forums:
| ||||||
|
Troubleshooting & Designing Networks
Post your computer network questions, ideas, gripes, and so on in here. This can be any type of network, whether its cabled, wireless, or whatever. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 501
Posts: 5,449
|
501 | 5,449 |
|
|||
|
Troubleshooting Laptops, Tablets, and Mobile Devices
Technical discussions covering any type of laptop, notebook, netbook, tablet, or smartphone. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 31,937
Posts: 304,614
Last Post:
Asus rog G531GW rev. 1.6 schematic
|
31,937 | 304,614 |
|
|||
|
Sub-Forums:
| ||||||
|
Troubleshooting Computer Displays
Technical discussions covering any type of PC/computer display, whether it be CRT, LCD, or anything else. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 5,323
Posts: 75,708
Last Post:
Screwed onto the board. Thoughts?
|
5,323 | 75,708 |
|
|||
|
Troubleshooting TVs and Video Sources
Technical questions about your defective television, projection screen, LCD/plasma, or any other type of video device. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 27,454
Posts: 374,776
|
27,454 | 374,776 |
|
|||
|
Troubleshooting Power Supplies and Power Supply Design
Technical discussion for power supplies. This covers PC supplies, and any other related power supply issue. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 4,183
Posts: 65,245
Last Post:
12v PSU help please.
|
4,183 | 65,245 |
|
|||
|
Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
Technical questions about your defective laser or ink printer, plotter, copier, scanner, and other imaging & printing devices. This section also includes digital cameras. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 302
Posts: 1,668
Last Post:
Canon PIXMA MG5650 dump
|
302 | 1,668 |
|
|||
|
Troubleshooting Audio Equipment
Technical discussion on audio equipment troubleshooting and installation. This can be anything from a home/car stereo, guitar amp, and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 2,327
Posts: 27,490
|
2,327 | 27,490 |
|
|||
|
Troubleshooting Appliances and other Household Electronic Stuff
Technical discussion on household appliances & other household electrics & electronics; including troubleshooting and installation. This can be anything from a washer/dryer, dishwasher, microwave oven, other sordid kitchen electrics and so on. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 224
Posts: 3,910
Last Post:
9V relay temperature 40C
|
224 | 3,910 |
|
|||
|
Troubleshooting Game Consoles & Other Weird Devices
This can be anything from game consoles to arcade games to anything else that doesn't really fit into any of the above categories. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!
Topics: 1,002
Posts: 10,879
Last Post:
Xbox 360E model:1538 not turning on
|
1,002 | 10,879 |
|
|||
|
Equipment Usage, Soldering, Techniques, and Reviews
Technical discussions concerning soldering techniques, usage of test equipment, how it works, what's best, and some pointers in using it all.
Topics: 1,378
Posts: 19,411
|
1,378 | 19,411 |
|
|||
-
04-24-2024, 12:51 PM
-
Attached schematic 🙂.
Laptop gives no signs of life. No fan and no CPU heat.
Think Engine BD4179MWV is hot on plugging in *AND* pressing the power button.
Discovered short to ground on VCC5M power delivery IC NB690GRP (5 volt line, not the high current VCC5M_PD) which is one of the ways that chip is powered. I'm puzzled.
Nothing else is warm on the board. CPU resistances are OK, 9V VSYS line is present from the BMIC. All misc and cables are disconnected.
What do you guys think happened? I've got two theories:
If the...I think ThinkEngine shorted first0I think 5V SMIC shorted first0I think something else happened005-07-2024, 04:44 PM -
Dear forum,
I'm stuck with this old TV unit.
PSU: 17PW04-1
MB: 17MB62-1
Symptoms:
- Blue LED constantly blinking when connected to AC.
- Only sigh of life is beeping when touching the capactive buttons on the front.
Diagnostics so far:
Checked the PSU output voltages:
12V present
5V present altought its only around 4.2V
3V is present measured 3.4V.
I check TP 202 which is for the short circuit protection: 0.606V on diode mode
Since I met with some vestel models before with similiar symptoms...05-03-2024, 03:18 AM -
Hello everyone, Due to a bad bios flash this Omen has a weird issue.
In the BIOS it says the ME version is 0.0.0.0 and when I try to update the BIOS it writes the bios region but when it reaches the firmware and ME it says it failed.
Tried HP USB recovery way and nothing worked.
I am kinda stuck, the main problem right now is the laptop would boot within 5 mins until the ME drivers load in windows and all works normally....Today, 03:02 AM -
Hi, I'm seeing one 9V relay having temperature 40C on its 9V (primary) side. Does that seem right? I switched 2 relays on that board and the temperature was the same (on the same position), so I'm sure it's not a faulty relay. I measured voltage on that relay and it was 9.5V DC, so that looks good. I don't see any other relay on that board having that kind of temperature and they have 9V on them too.
I thought maybe the transistor that is switching this relay keeps switching on/off, so I also checked for AC and there was almost none: 0.3V using mV range. No steady frequency was shown, but...Today, 03:03 AM -
Hi friend, I've this notebook HP Gaming 16-a0006nl with QUANTA DAG3JBMB8D0 that won't power on.
I start checking first mosfet and they seems to be ok.
On power button I get 3 that go to 0 on pressing, and come to 3v on release.
After I check charge ic that is BQ738H
I write here measure with battery and ac
19
19
19
25
3
1.9
0
3.1
3.1
1
11
11
11
gnd
0
6
10
11
11
19
I've 0 on pin 7 IOUT and on pin 15 LODRV.
...Yesterday, 07:09 AM -
-
Hello,
This special tool from Apple is used to recover data from Macbook A1706. I've been using it for a while but it stops working. When connecting Thunderbolt 3 between the tool and working Macbook, Macbook should prompt "new device detected, allow or not"... but it doesn't.
Has anyone ever experience this ? It's not a cabling or power supply issue, some IC have stopped working but not sure which one. Probably the one that manager thunderbolt 3
Thanks
Claude...Today, 02:02 AM -
Hi Community,
I've got the above model that activates the relay (clicks) and powers on the LG logo power light on when turned on. It then almost immediately turns off. I not noticed any image on the screen or heard any sound during this brief period.
Checks show:
3.5v on SMPS on (in off state, no other voltages present incl pwr on)
On pressing power button > the 3.5 pwn on voltage, 12v and 24v lines appear on the SMPS connnector between the main the SMPS but then all drop the zero in 1-2 seconds
Disconnecting 24 to TCON connector and powering on shows...Yesterday, 02:42 PM -
Hi everyone, I have a problem with a Samsung TV model UE50NU7400, I don't have the stanby LED, on the power supply board after a first check I found the fuse blown, and the 2 KF7N50 transistors on the primary power supply both short circuited, I replaced the fuse and the 2 transistors, now the short circuit has disappeared but I still don't have the LED off, do you have any suggestions?...Today, 02:17 AM
-
-
Hello everyone, Due to a bad bios flash this Omen has a weird issue.
In the BIOS it says the ME version is 0.0.0.0 and when I try to update the BIOS it writes the bios region but when it reaches the firmware and ME it says it failed.
Tried HP USB recovery way and nothing worked.
I am kinda stuck, the main problem right now is the laptop would boot within 5 mins until the ME drivers load in windows and all works normally....Today, 03:02 AM -
Hello,
This special tool from Apple is used to recover data from Macbook A1706. I've been using it for a while but it stops working. When connecting Thunderbolt 3 between the tool and working Macbook, Macbook should prompt "new device detected, allow or not"... but it doesn't.
Has anyone ever experience this ? It's not a cabling or power supply issue, some IC have stopped working but not sure which one. Probably the one that manager thunderbolt 3
Thanks
Claude...Today, 02:02 AM -
Hi friend, I've this notebook HP Gaming 16-a0006nl with QUANTA DAG3JBMB8D0 that won't power on.
I start checking first mosfet and they seems to be ok.
On power button I get 3 that go to 0 on pressing, and come to 3v on release.
After I check charge ic that is BQ738H
I write here measure with battery and ac
19
19
19
25
3
1.9
0
3.1
3.1
1
11
11
11
gnd
0
6
10
11
11
19
I've 0 on pin 7 IOUT and on pin 15 LODRV.
...Yesterday, 07:09 AM -
I have an Asus G14 (GA401QM) that has a power issue. Originally the board had a shorted 5V rail and dead EC. I reballed a working EC, soldered it on, and I resolved the 5V issue by replacing the APL6012 and the low side 5V mosfet. Resistances on all power rails are healthy now, but 20V does not make it through the first MOSFET. 20V is present on the drain of the first MOSFET, but there is no voltage on the gate or source.
When diagnosing this issue, I thought that the issue was due to the BQ24800 chip not outputting the correct signals so I soldered on a known working chip and the...Yesterday, 01:30 PM -
Hi,
working on a ASUS ROG STRIX GL702VSK 60NB0DZ0-MB1260 that does not power on. At the PQ8900 PIN2 (P_CHG_ACMOS_G_20) I am receiving 24.7V and PIN1 (P_CHG_ACMOS_S_20) 20V, however when I place the PQ8901 P_CHG_ACMOS_G_20 it drops 0V. I don't have the replacement mosfets ( N-MOSFET QM3058M6AC PRPAK5*6
UBIQ) however will any N-channel mosfet with similar parameters work ? I also found that PCI8703, PCI8701 are shorted. any help would be grateful.05-07-2024, 04:34 PM -
Hi, I'm seeing one 9V relay having temperature 40C on its 9V (primary) side. Does that seem right? I switched 2 relays on that board and the temperature was the same (on the same position), so I'm sure it's not a faulty relay. I measured voltage on that relay and it was 9.5V DC, so that looks good. I don't see any other relay on that board having that kind of temperature and they have 9V on them too.
I thought maybe the transistor that is switching this relay keeps switching on/off, so I also checked for AC and there was almost none: 0.3V using mV range. No steady frequency was shown, but...Today, 03:03 AM -
Hi everyone, I have a problem with a Samsung TV model UE50NU7400, I don't have the stanby LED, on the power supply board after a first check I found the fuse blown, and the 2 KF7N50 transistors on the primary power supply both short circuited, I replaced the fuse and the 2 transistors, now the short circuit has disappeared but I still don't have the LED off, do you have any suggestions?...Today, 02:17 AM
-
Hi Good peoples;
trying to identify manufacturers of this slide Pot from a Flight controller;
there is also an S W or M S printed underneath;
Sorry I couldn't get a better picture;
please and thanks as alwaysToday, 01:50 AM