TuanTongbadcaps
Senior Member
Last Activity: Today, 04:06 AM
Joined: 03-27-2023
Location: HA NOI
-
Thank you, Luis -
Have you tried with the file in post number 4 yet?...Leave a comment:
-
You need to get it from another active device, or from the donor table. That's what I know....Leave a comment:
-
You can try these two and let me know the results....Leave a comment:
-
[/QUOTE]
Here is the file from [B][SIZE=18px]volinakis[/SIZE][/B] that added your DMI. Try it out.
[/QUOTE]
Here is the file from [B][SIZE=18px]volinakis[/SIZE][/B] that added your DMI. Try it out.
[/QUOTE]
Here is the file from [B][SIZE=18px]volinakis[/SIZE][/B] that added your DMI. Try it out.
[/QUOTE]
Here is the file from [B][SIZE=18px]volinakis[/SIZE][/B] that added your DMI. Try it out.
[/QUOTE]
Here is the file from [B][SIZE=18px]volinakis[/SIZE][/B] that added your DMI. Try it out....Leave a comment:
-
You can try this method, many people have succeeded.
[url]https://www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-laptops-tablets-and-mobile-devices/bios-requests-only/3237235-lenovo-thinkpad-ec-pwd-bypass[/url]https://You can try this method, man...d-bypass[/url]...Leave a comment:
-
You need to program UEL1, programming UEL2 doesn't work. Have you tried with a new BIOS?...Leave a comment:
-
You can try with this dump...Leave a comment:
-
You can try with the dumps in post number: #23, #26, #35...Leave a comment:
-
Sent to you...Leave a comment:
-
My advice is that you should apply a very thin layer of solder flux to the chip surface before pouring the ball. As for what appears in the photo, I would add a layer of more flux once the balls have bonded from the 1st heat and continue with the 2nd heat....Leave a comment:
-
Try it...Leave a comment:
-
Have you tried the BIOS file in post #71?...Leave a comment:
-
I don't really remember what I did, every day I repaired a lot of devices. But sometimes cleansing the ME area can be effective....Leave a comment:
-
Try this...Leave a comment:
-
Keep the 16MB file intact and load this 8MB file...Leave a comment:
-
you can try with this...Leave a comment:
-
Have you tried the file in lesson number 45# yet?...Leave a comment:
-
try this...Leave a comment:
-
What problems do you have with your old BIOS?...Leave a comment:
No activity results to display
Leave a comment: