Hello,
I replaced the PCH with a new one. Could you please do a CleanME for this BIOS?
Thank you in advance.
SN : 5CD0368664
model : 16-a0000nt
mainboard : DA0G3JMB8D0 REV: D...
ay_bulut
Senior Member
Last Activity: Yesterday, 01:49 AM
Joined: 02-24-2016
Location: turkey
-
I did it the way I knew how to, and I installed the new PCH. There are no BIOS-related issues at the moment. Thank you very much for your help and interest....Leave a comment:
-
GM7TGxP Rev. 1.0 – PCH Replacement, Clean ME & Boot Guard Configuration
I have a GM7TGxP Rev. 1.0 motherboard. I’m going to install a new PCH. Could you please clean the ME and disable the BIOS Hash Key and other Boot Guard settings?
Could you also explain how this is done? I would like to learn the procedure for educational purposes. Thank you very much!
model : Tulpar T7 V20.4
mainboard : GM7TGxP Rev. 1.0
serial : GM7TG0R2214104174... -
Serial Number: 5CG021FLCM
Model: HP EliteBook 840 G6
When I shut down the computer, the cooling fan continues running at a very high speed and never stops, even though the laptop is powered off....Leave a comment:
-
I've tried RAM and SSD. There might be another problem....Leave a comment:
-
I tried the BIOS you sent, but it's still stuck on the same logo.
...Leave a comment:
-
G834JZR-N6072
SN: S1NRKD037494025
CN: J408
MDF: 2024-01
The logo is stuck; could you please fix it?...Leave a comment:
-
I also need the boardview file. Could you please help me with it?...Leave a comment:
-
Thank you very much. I delivered the device to the customer in this condition. There are backups available. After he receives it, he will bring it back again for formatting. At that time, I will try the BIOS you sent....Leave a comment:
-
When I flash the BIOS backup I made, it appears like this....Leave a comment:
-
ITE 8218VG-256
The ITE 8218VG-256 was faulty, so I replaced it and flashed the firmware. However, the keyboard did not work. Then I used Vertyanov to flash the ITE 8176FN firmware, but the keyboard still did not work. After that, I replaced it with another ITE 8176FN chip and flashed the firmware again, but the keyboard is still not working. The keyboard itself is brand new.
...Leave a comment:
-
The DMI information does not appear in the BIOS backup I took. Could you please fix it?
LOQ 15IAX9 - Type 83GS
MP2QJS1N...Leave a comment:
-
I successfully programmed it using the SCL, SDA, and GND connections via I2C. Thank youLeave a comment:
-
LENOVO...Leave a comment:
-
How to Program IT8218VG 256 CXO Lenovo ITE IO with SVOD4? Read Works but Write Fails – LA-N221P REV 1A
Hello everyone,
I am trying to program an IT8218VG 256 CXO Lenovo ITE IO on a Lenovo LA-N221P REV 1A motherboard using SVOD4.
The programmer can successfully detect and read the chip, but when I try to write, it gives an error and fails.
I already checked:
Connections
Power lines
Cable orientation
Different software versions
Reading works fine, only writing fails.
I also have a Vertyanov MB connection ITE programmer available and can test with that if needed.
Has anyone programmed this... -
MSI KATANA 17 B12VFK MS-15851 Mosfet
Hello,
What is the actual value/specification of the MOSFETs at the input?...Last edited by ay_bulut; 12-25-2025, 02:29 AM. -
I've tried all the BIOS versions I found on the forum, but the problem persists.Leave a comment:
-
The 16MB EC BIOS chip is faulty and I can’t take a backup. A new 16MB chip was installed. I flashed the BIOS file from message 29, but now I’m getting the error ‘Secured with Dell Safe BIOS’. Can you fix this?
Model : DELL Precision 3570
motherboard code : SOUTH PEAK 15 MLK MB DDR5 213117-1
Serial No: 1709DS3...Last edited by ay_bulut; 11-26-2025, 06:45 AM.Leave a comment:
-
Thank you very much for your interest....Leave a comment:
No activity results to display
Leave a comment: