-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Re: ME Firmware Cleaning Guide
Is it the same bios youve already asked about in the HP ZBook Studio G8 thread - https://www.badcaps.net/forum/showpo...3&postcount=14 . What is your model,firefly or studio G8 .If its the same bios you`re asking for just bump that thread,no need to post the same thing again.If its a different one then start a new thread.Comment
-
Re: ME Firmware Cleaning Guide
good job.Comment
-
Re: ME Firmware Cleaning Guide
if i take bios dump from biosrequest section and flash it will it then contain me region also? ..would it work if me region is gone corrupted?Comment
-
Re: ME Firmware Cleaning Guide
Some one have v16 for gen 12?
Flash Image Tool v 16.x.x.x.xComment
-
Re: ME Firmware Cleaning Guide
Thanks sir, after a long time and reading it again and again. i understand it nearabout
Badcap
Comment
-
Re: ME Firmware Cleaning Guide
Hello guys,
I need the firmware bin file CSE ME 12.0.35.1427 CNP-LP C, and I cannot find it anywhere, do you have any idea if it is possible to find it?
Thank you in advance.Attached FilesComment
-
-
Comment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
What flash image tool
Hi
what fit flash image tool to use with
"11.8.50.347" ?Attached FilesLast edited by SMDFlea; 05-08-2023, 09:37 AM.Comment
-
-
Comment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.​
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae..Comment
-
Re: ME Firmware Cleaning Guide
Hi guys
Mentioned in the Win Raid forum
D4. CSME 11 - 15 & CSTXE 3 - 4
15. is the "fptw64 -greset" step unnecessary when writing with a ROM writer?Comment
-
Re: ME Firmware Cleaning Guide
Does anyone have the tool to clear ME 16.1.25.1932 ?Comment
-
Re: ME Firmware Cleaning Guide
Thank you. You are great
)
Comment
-
Re: ME Firmware Cleaning Guide
Hi everyone, I am looking for Flash Image Tool 14.0.45.1389, does anyone have it for download?Last edited by Vesko356; 07-22-2023, 01:41 AM.Comment
-
Re: ME Firmware Cleaning Guide
Thank you very much, it is very good informationComment
-
Re: ME Firmware Cleaning Guide
Thank you so much SMDFlea for the great and easy to follow guide.
I am recently trying to clean the ME on Surface Pro 7 (CSME 13), however I am unable to find the "SMIP signning field" in the FIT. The FIT only lists non-zero OEM Public Key and OEM Key Manifest Binary.
I tried to ignore this step, but simply overwritting the ME Sub Partition with a clean one and exporting the bios is not working - the tablet just turns on and off.
Thank you
Comment
-
If you have to clean the ME firmware on **some microsoft surface models the touchscreen can stop working.
** Some models do not need this fix.
*You should install the latest updates from microsoft,including the driver packs before assuming there is a hardware problem.* - See Post #2
EDIT: If nothing else works try this fix - https://www.badcaps.net/forum/showpo...8&postcount=40
Always check a working dump from the same model using FIT.If the working dump default setting for "Integrated Sensor Hub Supported" is set to "NO"... -
i know a tool https://github.com/MuertoGB/MacEfiToolkit is capable of SN change and Clean ME but not updating EFI Version of the BIN file. is there a guide or a BIOS structure to update the firmware??...03-06-2024, 01:34 AM -
Hello to everyone ,
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...02-10-2024, 02:07 PM -
Hi guys.
I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.
So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
Got New chip and writes good.
THE PROBLEM...
It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.
Does anyone have a Good Firmware I can have?... -
Hello,
I hope this message finds you well. I wanted to share a recent experience I had with a laptop that had a Type-C Port issue, specifically related to a PD (Power Delivery) controller problem. After replacing the damaged PD controller chip with a new one I purchased from AliExpress, the laptop now charges properly and negotiates power as expected, allowing the device to power up. I've replaced this chip twice just in case.
However, it seems that the laptop's BIOS is detecting an older version of the PD Firmware on the newly installed chip. As a result, it attempts...
Comment