Could you please tell me some offset values of the DMI area of the attached file?
I could not find LENV.
Is it possible that the LENV characters themselves are encrypted?...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Lenovo Thinkpad L380 About DMI
-
DELL Latitude 5290 LA-F391P rev 2.0 BIOS PLZ
Hi
I can find the A00 of the BIOS, but I cannot find A01.
Please help me
DELL Latitude 5290
DDM60 LA-F391P
Rev 2.0 (A01)
2018-08-29Last edited by menthol; 08-05-2023, 10:52 AM.
-
Re: Latitude 5300 not charging.
Hi mon2-san
Thank you very much.
Very informative and helpful.
When measuring the resistance of a MOSFET, at what resistance level should I suspect it is defective?
Is it necessary to have more than 200-300kΩ between each terminal to determine that it is normal?
Leave a comment:
-
Re: Latitude 5300 not charging.
Hi mon2-san
Thanks for the reply.
PU4412
source (1-2-3) & drain (5-6-7-8) : 0.562MΩ
source (1-2-3) & gate (4) : 0.602MΩ
gate (4) & drain (5-6-7-8) : 1.002MΩ
PU4413
source (1-2-3) & drain (5-6-7-8) : 5.4kΩ
source (1-2-3) & gate (4) : 52.8kΩ
gate (4) & drain (5-6-7-8) : 95.6kΩ
I think MOSFET seems to be fine.
Leave a comment:
-
Re: Latitude 5300 not charging.
Hello mon2-san
Thanks for the reply.
A1: The adapter is a genuine DELL product.
A2: I measured the voltage of PR_ID and PR_ID_R. It seems that the battery is doing something wrong.
1. Only AC adapter is connected.
PS_ID: 3.291 [V]
PS_ID_R: 3.287 [V].
2. Connect AC adapter and battery
PS_ID: 0 [V]
PS_ID_R: 0.295 [V]
Leave a comment:
-
Latitude 5300 not charging.
Hi guys
Please Help me
I cannot charge my laptop by connecting the AC adapter to it.
[The following is the situation]
The laptop is just connected to the AC adapter without booting.
1. pin 19: ACIN of Charger IC does not go HIGH when connecting the AC adapter with the battery connected to MB. (sheet 44) PR4485 is not mounted.
2. the reason why ACIN does not go HIGH is because pin 5 of PQ4423 is set to HIGH and pin 3 and pin 4 are set to ON.
3. When supplying power from the AC adapter,...Last edited by Vesko356; 06-25-2023, 08:22 PM. Reason: Attached schematic removed and replaced with link.
-
Re: ME Firmware Cleaning Guide
Hi guys
Mentioned in the Win Raid forum
D4. CSME 11 - 15 & CSTXE 3 - 4
15. is the "fptw64 -greset" step unnecessary when writing with a ROM writer?
Leave a comment:
No activity results to display
Show More
Leave a comment: