Eeprom dump thread!

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • lotas
    Badcaps Legend
    • Jan 2016
    • 4451
    • Russia

    #1461
    Re: Eeprom dump thread!

    On the programmer - erase, write down my dump, check and solder back to the motherboard.

    Comment

    • jimbofz
      Badcaps Veteran
      • Apr 2013
      • 537
      • uk

      #1462
      Re: Eeprom dump thread!

      thanks for all your help
      now i have same fault
      so i will order a new spi chip and reload your dump
      it could simply be the chip is faulty
      all the supplies are good and clean
      i will report back

      Comment

      • lotas
        Badcaps Legend
        • Jan 2016
        • 4451
        • Russia

        #1463
        Re: Eeprom dump thread!

        If you saved your old dump before updating via usb, then you could know for sure whether the problem is in the firmware or not. Always before experimenting with your firmware, you need to make a backup of your dumps, so that if something is wrong, then they can be returned back.

        Comment

        • jimbofz
          Badcaps Veteran
          • Apr 2013
          • 537
          • uk

          #1464
          Re: Eeprom dump thread!

          i now understand thanks for advice

          Comment

          • jimbofz
            Badcaps Veteran
            • Apr 2013
            • 537
            • uk

            #1465
            Re: Eeprom dump thread!

            hi can anyone help with dump for philips 65PUS6162,05
            MB NUM:715G8709 MOE BOO 005N
            maybe the same as 55inch model?

            chassis TPM17.7E LA
            Last edited by jimbofz; 03-31-2023, 10:17 AM.

            Comment

            • yokoono
              Badcaps Veteran
              • Apr 2010
              • 475

              #1466
              Re: Eeprom dump thread!

              Chassis TPM17.7E LA or TMP17.7E LA ?.

              Comment

              • jimbofz
                Badcaps Veteran
                • Apr 2013
                • 537
                • uk

                #1467
                Re: Eeprom dump thread!

                im confused?
                Last edited by jimbofz; 03-31-2023, 10:18 AM.

                Comment

                • jimbofz
                  Badcaps Veteran
                  • Apr 2013
                  • 537
                  • uk

                  #1468
                  Re: Eeprom dump thread!

                  sorry its TPM i must remember to wear my glasses

                  Comment

                  • luzmina
                    Member
                    • May 2015
                    • 16
                    • US

                    #1469
                    Re: Eeprom dump thread!

                    jimbofz: in those Chinese tvs, if the only issue is no sound the problem is the sound amp, make sure the sound IC has power before replacing it, if no sound after replacing it then the issue is the microcomputer.

                    Comment

                    • lotas
                      Badcaps Legend
                      • Jan 2016
                      • 4451
                      • Russia

                      #1470
                      Re: Eeprom dump thread!

                      Originally posted by jimbofz
                      hi can anyone help with dump for philips 65PUS6162,05
                      MB NUM:715G8709 MOE BOO 005N
                      maybe the same as 55inch model?

                      chassis TPM17.7E LA
                      Here the error is not "O", but "0" correctly so 715G8709 M0E B00 005N

                      Comment

                      • yokoono
                        Badcaps Veteran
                        • Apr 2010
                        • 475

                        #1471
                        Re: Eeprom dump thread!

                        Originally posted by jimbofz
                        sorry its TPM i must remember to wear my glasses
                        Software pkg
                        https://files.fm/u/eqd8g2ejw

                        Comment

                        • jimbofz
                          Badcaps Veteran
                          • Apr 2013
                          • 537
                          • uk

                          #1472
                          Re: Eeprom dump thread!

                          Originally posted by lotas
                          Try
                          many thanks
                          new spi chip with your dump works fine on technika

                          Comment

                          • jimbofz
                            Badcaps Veteran
                            • Apr 2013
                            • 537
                            • uk

                            #1473
                            Re: Eeprom dump thread!

                            Originally posted by yokoono
                            many thanks for this dump
                            im having problem writing extracted .bin file to chip
                            my new chip is :st m24128b wmn6p
                            the ch341a programmer only has up to
                            m24c64 when you select manufacturer st from list
                            when i select atmel at24c128bi get
                            "chip memory with contents disagreement " message
                            can you advise please

                            Comment

                            • lotas
                              Badcaps Legend
                              • Jan 2016
                              • 4451
                              • Russia

                              #1474
                              Re: Eeprom dump thread!

                              Originally posted by jimbofz
                              many thanks for this dump
                              im having problem writing extracted .bin file to chip
                              my new chip is :st m24128b wmn6p
                              the ch341a programmer only has up to
                              m24c64 when you select manufacturer st from list
                              when i select atmel at24c128bi get
                              "chip memory with contents disagreement " message
                              can you advise please
                              What program do you have for CH341A?

                              Comment

                              • jimbofz
                                Badcaps Veteran
                                • Apr 2013
                                • 537
                                • uk

                                #1475
                                Re: Eeprom dump thread!

                                version 1.30

                                Comment

                                • lotas
                                  Badcaps Legend
                                  • Jan 2016
                                  • 4451
                                  • Russia

                                  #1476
                                  Re: Eeprom dump thread!

                                  Originally posted by jimbofz
                                  version 1.30
                                  Install this program

                                  https://www.badcaps.net/forum/showpo...7&postcount=51

                                  Comment

                                  • lotas
                                    Badcaps Legend
                                    • Jan 2016
                                    • 4451
                                    • Russia

                                    #1477
                                    Re: Eeprom dump thread!

                                    Or this
                                    Attached Files

                                    Comment

                                    • Slimmwill
                                      New Member
                                      • Dec 2021
                                      • 1
                                      • United Kingdom

                                      #1478
                                      Re: Eeprom dump thread!

                                      can you help looking for firmeware for a hisense h55m3300 can anybody help

                                      Comment

                                      • jimbofz
                                        Badcaps Veteran
                                        • Apr 2013
                                        • 537
                                        • uk

                                        #1479
                                        Re: Eeprom dump thread!

                                        Originally posted by lotas
                                        ok installed siberia prog
                                        LOOKS GOOD DESIGN ,
                                        connected ch341a with new blank eeprom soldered on : m24128 bwmn6p
                                        changed language to english
                                        entered
                                        ;EEPROM 24XX
                                        24C128
                                        i get:recognition error?
                                        any ideas ?

                                        Comment

                                        • lotas
                                          Badcaps Legend
                                          • Jan 2016
                                          • 4451
                                          • Russia

                                          #1480
                                          Re: Eeprom dump thread!

                                          Do you correctly insert it (eeprom) into the programmer? Post a photo of how it's installed.

                                          Comment

                                          Working...