Eeprom dump thread!

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts

  • kamaku
    replied
    Hi does anyone have the usb firmware or emmc dump for a Cecotec ALH30032S main: TPD.RT2841A.PB782
    Thanks

    Leave a comment:


  • digitel
    replied
    Hitachi 43HAE4251 firmware

    Please, do you have the firmware for a Hitachi 43HAE4251 TV, with Mainboard 17MB171 and Panel VES430UNDH-N2-N45 The memory is not SPI Flash. It's EMMc. Thank you.

    Leave a comment:


  • sordids999
    replied
    Hi does anyone have the firmware for a Panasonic 50lx650 main board 17mb185
    Screen ves500qnzh-n2-z01
    23798312
    Thanks

    Leave a comment:


  • digitel
    replied
    Please, do you have the firmware for a Hitachi 43HAE4251 TV, with Mainboard 17MB171 and Panel VES430UNDH-N2-N45? The memory is not SPI Flash. It's EMMc. Thank you.

    Leave a comment:


  • luzmina
    replied
    Here is the dump for the Hisense 70H6570G and 70A6G. It fixed the corrupted EMMC issue that put the TV into a loop.
    Board RSAG7.820.9783/ROH
    https://drive.google.com/file/d/129h...usp=drive_link

    Leave a comment:


  • Salvatore Cancellieri
    replied
    Hi everyone, I have a 65" Philips TV, it turns on and after a while it restarts endlessly, I checked the power supply and everything is ok, I disconnected all the devices and the panel but it continues to restart, I assume it is a dump problem, below is the original dump
    TV model 65PUS6523/12
    Board model 703TQHPL433 715G8709-M0B-B01-005K​

    Thanks
    Attached Files

    Leave a comment:


  • lotas
    replied
    Originally posted by dinche_ze

    it works.
    than you very much
    That's good.

    Leave a comment:


  • dinche_ze
    replied
    Originally posted by lotas

    Try.
    it works.
    than you very much

    Leave a comment:


  • lotas
    replied
    Originally posted by dinche_ze
    Pozdrav prijatelji,
    imam Toshiba 32el933g TV. Samo crveno svjetlo svijetli, ne pali se ni ništa. Kada sam ažurirao firmware, otkrio sam da se TV uključuje, ali nema slike. Mislim da se matrica ne podudara. Moja matrica je LG. Za drugu ne znam. Objavit ću originalni firmware od TV-a i novi ako netko zna kako ih uskladiti.
    Try.
    Attached Files

    Leave a comment:


  • dinche_ze
    replied
    Pozdrav prijatelji,
    imam Toshiba 32el933g TV. Samo crveno svjetlo svijetli, ne pali se ni ništa. Kada sam ažurirao firmware, otkrio sam da se TV uključuje, ali nema slike. Mislim da se matrica ne podudara. Moja matrica je LG. Za drugu ne znam. Objavit ću originalni firmware od TV-a i novi ako netko zna kako ih uskladiti.
    Attached Files
    Last edited by dinche_ze; 05-26-2025, 02:43 PM. Reason: not original photo

    Leave a comment:


  • lotas
    replied
    Originally posted by cheeky2

    Thanks Lotas it worked a treat
    Ok!

    Leave a comment:


  • cheeky2
    replied
    Originally posted by lotas

    Try this dump, but the panel is unknown.
    Thanks Lotas it worked a treat

    Leave a comment:


  • dinche_ze
    replied
    Originally posted by lotas

    So what does the firmware have to do with it? If it doesn't work for you via the remote control, check the remote control, try via a universal remote control. If it doesn't work, replace the IR receiver, make sure the pulses reach the processor...
    probao sam, ispravan daljinski, nece ni univerzalni. a ir prijemnik sa 4 pina,( 2 gnd, na jednom stalnih 5V, a na drugom 5V koji opada na 3,5V kada koristim daljinski), nemam takav ir da bi testirao ,mada sumnjam da je do njeg jer reaguje

    Leave a comment:


  • lotas
    replied
    Originally posted by dinche_ze

    problem is that remote control is not working, other things works fine.
    So what does the firmware have to do with it? If it doesn't work for you via the remote control, check the remote control, try via a universal remote control. If it doesn't work, replace the IR receiver, make sure the pulses reach the processor...

    Leave a comment:


  • dinche_ze
    replied
    Originally posted by lotas


    Post here your original, non-working dump, I'll try to fix it.​
    problem is that remote control is not working, other things works fine.

    Leave a comment:


  • lotas
    replied
    Originally posted by dinche_ze

    Post here your original, non-working dump, I'll try to fix it.​

    Leave a comment:


  • dinche_ze
    replied
    Originally posted by lotas

    Don't you know the motherboard number either?

    Leave a comment:


  • lotas
    replied
    Originally posted by dinche_ze
    hello friend
    I need spi flash for TESLA TV
    model: 43S306BF
    dont know matric number
    Don't you know the motherboard number either?

    Leave a comment:


  • dinche_ze
    replied
    hello friend
    I need spi flash for TESLA TV
    model: 43S306BF
    dont know matric number

    Leave a comment:


  • cheeky2
    replied
    Originally posted by lotas

    Try this dump, but the panel is unknown.
    Thanks I will give it a go over the next few days and let you know the results

    Leave a comment:

Related Topics

Collapse

  • AlexGsmMaster
    Eizo CS2740 eeprom dump, search.
    by AlexGsmMaster
    Good day to all, I have a big problem. I can't find the eeprom dump for the Eizo CS2740 monitor. The device doesn't turn on, the indicator just lights up. It responded to connecting to the PC once. The update process started with the standard program and then disconnected from the computer. The computer doesn't detect it anymore. If anyone has an eeprom dump, please share.
    07-26-2025, 03:24 PM
  • (0)_(0)
    Looking for a HP Photosmart C4280 EEPROM dump
    by (0)_(0)
    Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.

    The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...
    02-17-2022, 09:09 PM
  • my2k2
    Harman Kardon AVR 171, Request for IC1504 (24C32) eeprom dump file
    by my2k2
    Good day to every one,

    I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
    Does anybody have an eeprom dump file? I really appreciate any help.
    Thanks in advance.
    07-01-2024, 09:04 PM
  • Whale linguini
    p14s Gen 2 thunderbolt eeprom dump
    by Whale linguini
    P14s Gen 2
    HT4B0/HP4B0/HT5B1/HT4B2
    NM-D352 Rev 1.0
    sn PF-35P15W

    Requesting thunderbolt dump

    also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work....
    09-03-2024, 01:56 PM
  • Ancient1
    Before I dump this Panel...
    by Ancient1
    Hi

    I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists

    As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).

    Right distribution board, 2 Flexs, near them:
    The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
    The other, pressing on the Panel to the Chassey and the lines disappears 99.99%

    I...
    10-23-2022, 11:07 AM
  • Loading...
  • No more items.
Working...