Announcement

Collapse
No announcement yet.

Eeprom dump thread!

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: Eeprom dump thread!

    On the programmer - erase, write down my dump, check and solder back to the motherboard.

    Comment


      Re: Eeprom dump thread!

      thanks for all your help
      now i have same fault
      so i will order a new spi chip and reload your dump
      it could simply be the chip is faulty
      all the supplies are good and clean
      i will report back

      Comment


        Re: Eeprom dump thread!

        If you saved your old dump before updating via usb, then you could know for sure whether the problem is in the firmware or not. Always before experimenting with your firmware, you need to make a backup of your dumps, so that if something is wrong, then they can be returned back.

        Comment


          Re: Eeprom dump thread!

          i now understand thanks for advice

          Comment


            Re: Eeprom dump thread!

            hi can anyone help with dump for philips 65PUS6162,05
            MB NUM:715G8709 MOE BOO 005N
            maybe the same as 55inch model?

            chassis TPM17.7E LA
            Last edited by jimbofz; 03-31-2023, 10:17 AM.

            Comment


              Re: Eeprom dump thread!

              Chassis TPM17.7E LA or TMP17.7E LA ?.

              Comment


                Re: Eeprom dump thread!

                im confused?
                Last edited by jimbofz; 03-31-2023, 10:18 AM.

                Comment


                  Re: Eeprom dump thread!

                  sorry its TPM i must remember to wear my glasses

                  Comment


                    Re: Eeprom dump thread!

                    jimbofz: in those Chinese tvs, if the only issue is no sound the problem is the sound amp, make sure the sound IC has power before replacing it, if no sound after replacing it then the issue is the microcomputer.

                    Comment


                      Re: Eeprom dump thread!

                      Originally posted by jimbofz View Post
                      hi can anyone help with dump for philips 65PUS6162,05
                      MB NUM:715G8709 MOE BOO 005N
                      maybe the same as 55inch model?

                      chassis TPM17.7E LA
                      Here the error is not "O", but "0" correctly so 715G8709 M0E B00 005N

                      Comment


                        Re: Eeprom dump thread!

                        Originally posted by jimbofz View Post
                        sorry its TPM i must remember to wear my glasses
                        Software pkg
                        https://files.fm/u/eqd8g2ejw

                        Comment


                          Re: Eeprom dump thread!

                          Originally posted by lotas View Post
                          Try
                          many thanks
                          new spi chip with your dump works fine on technika

                          Comment


                            Re: Eeprom dump thread!

                            Originally posted by yokoono View Post
                            many thanks for this dump
                            im having problem writing extracted .bin file to chip
                            my new chip is :st m24128b wmn6p
                            the ch341a programmer only has up to
                            m24c64 when you select manufacturer st from list
                            when i select atmel at24c128bi get
                            "chip memory with contents disagreement " message
                            can you advise please

                            Comment


                              Re: Eeprom dump thread!

                              Originally posted by jimbofz View Post
                              many thanks for this dump
                              im having problem writing extracted .bin file to chip
                              my new chip is :st m24128b wmn6p
                              the ch341a programmer only has up to
                              m24c64 when you select manufacturer st from list
                              when i select atmel at24c128bi get
                              "chip memory with contents disagreement " message
                              can you advise please
                              What program do you have for CH341A?

                              Comment


                                Re: Eeprom dump thread!

                                version 1.30

                                Comment


                                  Re: Eeprom dump thread!

                                  Originally posted by jimbofz View Post
                                  version 1.30
                                  Install this program

                                  https://www.badcaps.net/forum/showpo...7&postcount=51

                                  Comment


                                    Re: Eeprom dump thread!

                                    Or this
                                    Attached Files

                                    Comment


                                      Re: Eeprom dump thread!

                                      can you help looking for firmeware for a hisense h55m3300 can anybody help

                                      Comment


                                        Re: Eeprom dump thread!

                                        Originally posted by lotas View Post
                                        ok installed siberia prog
                                        LOOKS GOOD DESIGN ,
                                        connected ch341a with new blank eeprom soldered on : m24128 bwmn6p
                                        changed language to english
                                        entered
                                        ;EEPROM 24XX
                                        24C128
                                        i get:recognition error?
                                        any ideas ?

                                        Comment


                                          Re: Eeprom dump thread!

                                          Do you correctly insert it (eeprom) into the programmer? Post a photo of how it's installed.

                                          Comment

                                          Working...
                                          X