Dump/Firmware needed TV Kunft 19CG86813 Board T.EME380.61 Panel ECG185BB-LC4

[jorpec]

Hi, all

I need the dump/firmware for this tv, it was on a boot loop, i dont have the original corrupted dump because i used a pen drive with a firmware that solved the boot loop, initially it seemed it was ok but the tv has no sound

Thanks

[jorpec]

Just to give some feedback, I was able to fix the tv with the firmware posted on this post https://www.badcaps.net/forum/troubl...anel-cx240ledm

The panel is not the same even has a different size, but the image is normal, only the buttons have a different setup easily fixed by changing the wires, also the remote dont work i had to program a universal remote programed to a Vinchi tv

[lotas]

Try the original dump from your TV.