Re: Eeprom dump thread!
Technika (UK)
LCD19-228G
t.msd306.2b
u10 - winbond: W25Q32BVxxx
please ignore the pre-programed channels
Technika (UK)
LCD19-228G
t.msd306.2b
u10 - winbond: W25Q32BVxxx
please ignore the pre-programed channels
-
-
Re: Eeprom dump thread!
Hello.
Is there firmware for that F&U model FL32105 MAIN HK.T.RT2957P68 and for F&U model FL28101 MAIN HK.T.RT2957P68??? ThanksComment
-
Re: Eeprom dump thread!
Sorry I was wrong about fl28101 the main is ΗΚ.Τ.RΤ2957P61Comment
-
Re: Eeprom dump thread!
F&U FL28101 MAIN HK.T.RT2957P61
https://www.elektroda.pl/rtvforum/to....html#17878967Comment
-
Re: Eeprom dump thread!
Hi can help me plase dump or firmware
Orion PIF32 D3D (DVB-T, DVB-C)
LCD32
Panel: vestel_17mb62-2.5
u158 - winbond: W25Q80BVxxx
SERVICE MENU (V.0.0.7 MB62_3D) (/0009df/6211_dcf)
TV Life Time: 1463540 minutes Tv APS Time: Csü 01/01/1970, 01:00
Standby SW Versiom : 25 MFC FW Version: N/A
MBoot Version : 116-157M62_3D SP
MBoot Name: MB62.MBoot_V1.1.6-157M62_3D
PANEL : 32_LG_SEP2_169FHD_F_N_NO_V_NONA_52399_622 - V1.85 - xxxxxxxxx
PQ : PQTool_MB623D_OEM_FHD_49456
PROFILE: 62_20030072553TNHUD3112N632_FT200010C063PV007
PIX FILES : IC IS NOT AVAILABLE
24.02.2012_02:45_HA
HW Profile Version: 066 SW Profile Version: 100 Lan Profile Version: 036
Thanks!
Comment
-
Re: Eeprom dump thread!
HI PLEASE HELP
I have a JVC LT-48K770 with panel VES480UNDS-2D-N12
and mainboard 17MB110P
I need software for MX25L16 and software for USB update
Any help i apriciate becose i have big truble with the specific shasis
The tv is blinking all the time , i have change the led bars , i try to flash with deferent soft from the web but nothing .I think needs the specific sofware for the specific model.Comment
-
Re: Eeprom dump thread!
Try (for Silver):Comment
-
Re: Eeprom dump thread!
Has anyone got the firmware archive for aT.MSD.309.BTU87 PANEL V500DK1.LS1
Thanks.Comment
-
Re: Eeprom dump thread!
Model: Thomson 32HU2253
MainBoard: 40-MT10TD-MAB2HG
Screen: T320XVN02.0Comment
-
Re: Eeprom dump thread!
model : samsung ua32t4310akxxl
mainboard : jDM_KANT-S2_32/43_INDIA
I have this samsung smart 32 inch led tv. problem is standby indicator blinks every 5 seconds. if i keep power button pressed for few seconds then indicator go off for few seconds but tv doesn't start no back light no panel voltage (panel is ok with universal board ). i remover 25q40 spi chip then indicator goes blank.
I think it is corrupted ,can any one provide dump for 25q40.
my dump is attached hereComment
-
Re: Eeprom dump thread!
Thank you
THIS DUMP IS NOT WORKING
MAIN BORD t.msd309.btu87
PANEL V500DK1.LS1Last edited by GASMI.DZ; 12-02-2022, 04:08 AM.Comment
-
-
Re: Eeprom dump thread!
Is there any chance someone has a dump for this tv? Or can this dump be repaired?
Samsung HG40EC690 https://mega.nz/file/s5EDEIRS#TU9hmd...tDNApqGb82Xki0
ThanksComment
-
Re: Eeprom dump thread!
@IotasComment
-
Re: Eeprom dump thread!
Thanks a lot Iotas!
Any chance you have a dump for this emmc?
BN41-02160A. Its something similar to F/E/J series, but this one is a hotel version.Last edited by ducky29; 12-20-2022, 04:07 AM.Comment
-
Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work.... -
Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I... -
Comment