Eeprom dump thread!
Collapse
This is a sticky topic.
X
X
-
-
Comment
-
Re: Eeprom dump thread!
Comment
-
Re: Eeprom dump thread!
tv normal good.internet problem no software No way.
ty See you my friendLast edited by ayhan yılmaz; 01-15-2019, 03:31 PM.Comment
-
Re: Eeprom dump thread!
Hello, I noticed the philips's emptyburn tool is not on here so here are the (official) links
TV from 2015: https://app.box.com/s/tsrq6lnyzedopdw3k78hzu1htmkvp04y
TVs from 2016 and 2017: https://app.box.com/s/omze9q11q2iizvjqd51ev82kbaswox7d
? 40x0-42x0, 52x0 e 63x0 TV from 2015 2015.
? 4031, 41x1, 42x1 and 5231 TVs from 2016.
? 24PFS5242 TVs from 2017.
This is an official philips tool that helps fix mostly reboot issues or and issue where the remote control doesn't completely work.
You need to flash this and then the firmware from the support page on the official website.Comment
-
-
Re: Eeprom dump thread!
tryAttached FilesComment
-
-
-
-
Comment
-
Re: Eeprom dump thread!
Ducky & antas Turkish currency wanted 100 TL
15 Euro for the Turkish currency.
Vestel-seg-higlevel software is not a problem.
Exported product. He wanted money from me.
This was the first
*I'm surprised
Previous software gave another forum.
The software does not exist in any forum.Last edited by ayhan yılmaz; 01-29-2019, 08:51 AM.Comment
-
Re: Eeprom dump thread!
Ducky & antas Turkish currency wanted 100 TL
15 Euro for the Turkish currency.
Vestel-seg-higlevel software is not a problem.
Exported product. He wanted money from me.
This was the first
*I'm surprised
Previous software gave another forum.
The software does not exist in any forum.Comment
-
Re: Eeprom dump thread!
Need help here guys! any one have the eeprom dump of LG 43lf5400-TB?
thanks..Never stop LEARNING because life never stops TEACHING!Comment
Related Topics
Collapse
-
by (0)_(0)Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
by my2k2Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.-
Channel: Troubleshooting Audio Equipment
07-01-2024, 09:04 PM -
-
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work....-
Channel: BIOS Requests ONLY!
-
-
by Ancient1Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I... -
by jimhaHi ,
I'm looking for a dump to repair my screen
Thanks-
Channel: Troubleshooting Computer Displays
12-09-2024, 03:52 PM -
- Loading...
- No more items.
Comment