-
Last edited by Diah; 02-19-2022, 10:15 AM. -
Re: Sony xbr65x900c sound yes, no backlight or image.
.01 volt.Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
I think thats means im in deep shit, no way I can replace that little IC, its hard enough just to see it, lol,
Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
just now no need to think on the IC. pin 18 are low 0. we will find why.. go to yours LD boards you said you have 12 volts on cn6602 . on same socket pin 4 connected direct to pin 9 on the other socket at the boards... check both are connected and if they have 12V ?Comment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
that was the voltage i got at the G1B board, are you saying go from pin 4 of cn6601 which is vled_gd to pin 9 of 6602 which is ground? ok 4 to 9 has continuity but I have 0v when powered on.Last edited by nomoresonys; 02-19-2022, 11:05 AM.Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
edited above. They are both grounds, should they have voltage between them?Last edited by nomoresonys; 02-19-2022, 11:08 AM.Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
man. this is confused... SJ photo may different.. cn6602 pin 4 & cn6601 pin 9 they connected together and should have 12.V... you need to follow both to know who are the IN 12V. and from where.Comment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
.Last edited by nomoresonys; 02-19-2022, 11:27 AM.Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
probably not what you meant, I tested cn6102 pin 4 to cn6402 thats between both powerboards, i got 27v.Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
post photo on yours LD boards
no need you have..
also pin 9 recieve 12V from MB pin 1. you need to check if you have fuse on this rail on MB openAttached FilesLast edited by Diah; 02-19-2022, 11:38 AM.Comment
-
-
Re: Sony xbr65x900c sound yes, no backlight or image.
ok, my bad, there does seem to be a difference between the G1B and the G1C i linked, heres a pretty good picture of the G1B board. I noobed that one
https://www.ebay.com/itm/12512214097...YAAOSw6dVh84uZ
Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
look above i add yours photoComment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
Thanks Diah, i just took a bunch, ill add them.Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
Pictures:Attached FilesQuit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
-
Re: Sony xbr65x900c sound yes, no backlight or image.
pictures:Attached FilesQuit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
-
Re: Sony xbr65x900c sound yes, no backlight or image.
my attached photo at post #210 i wrote it in wrong way
12V come from PCB to the boards cn6602 pin 4 then go to MB via PIN 9 CN6601.
just check there are 12V or not.Attached FilesComment
-
-
Re: Sony xbr65x900c sound yes, no backlight or image.
with this camera if you try to get too close it blurs everything.Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
ok, i have 12 at 4 and 9, i measured between 9 and where it goes to ld board, there is 0v on the ld side, thats from cn6601, should i yank that harness and check it for continuity?Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
I do currently have the bl-error pin from pin 2 grounded to pin 9 on cn6602, has been for a while.Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.Comment
-
Re: Sony xbr65x900c sound yes, no backlight or image.
ok. now you need on the socket cn6602 pin 1 BL_ON to pull it out from the socket ( discconect it ) and power on... messure the cable if it go high... in case yes or no ... go to the shit IC pin 18 check if it get >3.VComment
-
Hello,
at tv KD - 65XF9005 i have a problem.
Afrer a coupe of minutes (10-30) i got black screen, no image. But i have sound.
is this a common problem for this tv?
i attached pictures of inside. Supply board looks okey, no blowed caps.... -
so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!!
what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol! 
i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing... -
Good Day.
I just replaced tcon on my sony kdl 65xg9505 and getting green amber leds blinking. all voltages are ok according to working sequence.
i downloaded firmware from sony and there is no .pkg fike.. after extracting it gives another file which contains multiple files like inf, payload.bin and 3, 4 other files. i just did that usb but did not worked. anyone knows anything how to do it..?
green amber blinking stops after while and then starts again. tv responds to remote control on off etc. before installing new tcon backlite was coming on without backlite... -
Hi, my TV image started showing those lines and the image faded away, but sound is still coming from it, what could be the cause and is it fixable? I thought it could be the tcon board but I red on the internet that it could be a failing panel
... -
Hi everyone,
I'm troubleshooting a power supply issue with a Sony SLV-E780 VCR. The device clicks repeatedly but doesn't power up completely. I've already replaced five capacitors, but the problem persists.
Here's a video link https://photos.app.goo.gl/3Xki6yvCLn67gLX78 showcasing the sound. Based on your experience, could this be due to a transformer, diode, or another component? Any guidance on what to test or replace next would be greatly appreciated.
Thanks in advance for your help!
Comment