Ah. what a shame for this tv..Maybe a factory reset...? did you perform that..? i am sorry mate.. sony tv's are miserable to repair, nothing less than going to moon on a donkey..
Put it aside somewhere safe and maybe there will be someone who may get a .fucking pkg file for this shit. who knows.....
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
I hoped they will but they sent a link to the same firmware on their website so i contacted again and they said take your tv set to our service center..
So. service center is 200km away from me means 4 hours of travel+ 50 euro on gasoline and they will be charging me 150 as a service charge even if its non repairable. with repair would be around 400 euro which i think too much.
They did not sent me any .pkg file. i did an extensive search asked on every single place even moron youtubers who would sell their videos but wont help when you ask.
Tv is standing...
Leave a comment:
-
-
wds-580 rework station issue
Good day.
i received used bga rework station wds-580 which was not going above 300c despite the parameter was set to 350c, Everytime beeps at 300c so i did a factory reset and by mistake washed data and log etc. now the station boots to a white screen.
Does anyone has a firmware for this station and want to share with me. i will really appreciate any help possible..
kind regards...
-
-
Yes.. true.
Now. this tv has a firmware on sony site as .zip. when unzipped there is another .zip file. inside the last .zip file there are multiple files. payload.bin, inf, etc .
I have tried many many times. with .zip in usb root folder, Its just not picking it up. the tv does reads the usb but no firmware update is performed. unless there is a specific method to do it which is not mentioned on sony site.....
Leave a comment:
-
I would love to do it and let it mess it all. but sad enough when there is no image i can not perform an update. and while no image only a .PKG file is required which is nowhere to be found....
Leave a comment:
-
Yes. there is 12v on Tcon fuse. i can measure 1.1v. 1.8v around the tcon processors. wel hardware change but all boards are from the same tv.
But if it comes down to software update then i maybe back to page 1 for this thread since there is no .pkg available and .zip does not work.
So..
Leave a comment:
-
-
-
Good day..
i have received Mainboard, Tcon and inverterboard from a same broken tv..
Now with this new boards tv sound is working. responds to remote inputs, detects and plays hdmi and backlite also goes on but all i get is backlite on screen. no image.. now what...?
amber green light is gone. but now this new issue pfff.
Leave a comment:
-
Oh mate.. think of anything possible doing with that file and i have done that. 1st file. 2nd file. even 2nd file extracted, renamed, i have tried more than 100 times with 10 different usb sticks in different ways.. pfff. non helped. .pkg is the only way for it to work same like a windows bootle usb/disk can start the setup. putting extraced windows or iso or .zip will never boot for setup..
.zip work only when the tv is working and you want to update its firmware then you access it with the tv menu and run it..
It will never start the update from a usb port on its...
Leave a comment:
-
QE82Q6FNATXZG samsung qled
Good day.
what is it defect here...? video link for the problem..
[url]https://quickshare.samsungcloud.com/gALvk993tKVh[/url]
Thankshttps://Good day.<br /> <br /> what ... <br /> ThanksGood day.
what is it defect here...? video link for the problem..
[url]https://quickshare.samsungcloud.com/gALvk993tKVh[/url]
Thanks
-
Wel. As you can see in the video. His downloaded file is a .PKG file. not a zip file after extraction. This is the issue. When i extract the file for my tv. i dont get a .pkg but again a .zip with multiple files in there.
I have also contacted nick and sad enough no clear anwser from them only suggested download from sony site which i end up again with .zip firmware....
Leave a comment:
-
Got it. that profile is ok for that board. I think the machine itself is ok. only i were using temps meant for small chips. that gpu for macbook is way too thin compared to a desktop 3080 chipsets.
His machine is a bit different than mine.. maybe higher or lower model.. but pretty much the same heaters and so on. even the new zm-r7220 is using the same principle all i can see is different design.
Anyway. thanks for your help. i will go with trial and error on donors boards until i reach what i need.
Btw. is that IR temps issue..? does it goes to 400 while...
Leave a comment:
-
Wel..as i said before. it does melt the leadfree vram chips while trying to melt the gpu.
since i did perform 2x rtx 3080 chips with this station and i do have a 4k camera pointed under the chip looking at the solder balls.. both reballs went ok. tested and cards are working fine.
only problem i am having removing lead free soldered gpu chips .
Your profile...? used for which boards..? laptop, tv or mobiles..?
gpu's are 8 layers pcb's. and solder melts 240C plus.. so that profile you sent is not meant for gpu boards..?
i just tested...Last edited by shahnld; 01-26-2024, 02:54 PM.
Leave a comment:
-
-
btw. i also have a firmware update received for it. not yet updated but seamark did send it..
Leave a comment:
No activity results to display
Show More
Leave a comment: