Eeprom dump thread!

[MarioCriscuolo]

Re: Eeprom dump thread!

[MarioCriscuolo]

Re: Eeprom dump thread!

Hello Lotas, thanks a lot for your quick reply.
Could you please help me? I cannot install this bin file into my AKAI tv.
When I run "software update (USB)" in the TV menu, I get an error message "can't detect USB".
I'm sure the USB port is working fine because if i try another bin file (the one that corrupted my TV... I did it because of an audio codec issue), the TV reads that bin file.
Am I making some mistake? I just decompress the .rar you posted to obtain the Akai AKTV3214T LDD.M3463.E E32-0A35 GD25Q64.bin file. Then I put it onto my FAT32 formatted USB stick. Then I put the stick into the only USB port I have on the TV, and then I enter the TV menu selecting "software update (USB)".
Thank you so much for support!

[yokoono]

Re: Eeprom dump thread!

The software received is for the programmer, not for the stick.

[MarioCriscuolo]

Re: Eeprom dump thread!

Oh... sorry for my misunderstanding. Is there a way to reprogram it with a stick? A bin file suitable for a stick?

[lotas]

Re: Eeprom dump thread!

Yes, you can use usb, but you need to rename it correctly so that the processor understands that this is an update.

[IamEngineer]

Re: Eeprom dump thread!

https://disk.yandex.com.tr/d/YTE3rTES6vlzEA

Hi, is it possible to re upload this file?

[IamEngineer]

Re: Eeprom dump thread!

Hi, is it possible to re upload this file?

Originally Posted by StephenU View Post
Looking for Eeprom and NAND flash for a bootlooping

SAMSUNG UE40D5520
Part # K9GAG08U0E (NAND)
Mainboard: BN41-01660B

[MarioCriscuolo]

Re: Eeprom dump thread!

Yes, you can use usb, but you need to rename it correctly so that the processor understands that this is an update.

What is the right name to use? Ive just decompressed the rar file obtaining exactly the same name but .bin instead of .rar
Thanks a lot!

[lotas]

Re: Eeprom dump thread!

It should be XXXX.bin, but which XXXX... I don't know.

[survey]

Re: Eeprom dump thread!

Hi Guy's wish a good new year to all.
Can someone help with the dump for a 25Q32 on a CY-TJ055HGEV2H 55" Panel?

Everything on this tv is good except this flash on right board of panel is burned!
TV works with Backlight and sound (from hdmi) but black screen.
Samsung UE55JU6800K

Thanks in advance, with best regards.

[apokalipto]

Re: Eeprom dump thread!

HITACHI LE46S704 stuck in stanby , can somebody helpme to check this dump and repair it?

[cyrubz]

Re: Eeprom dump thread!

Good day. Hope you can share eeprom dum for TCL TV Model 49C6US

Thank you

[goleg1972]

Re: Eeprom dump thread!

Hi,

I need the firmware for a Samsung UN65NU6900FXZ, W25Q40 damp

Thanks,

[goleg1972]

Re: Eeprom dump thread!

Hi,

I need the firmware for a Samsung UN65NU6900FXZC, W25Q40 damp

Thanks,

[perico316]

Re: Eeprom dump thread!

mst6m182vg-v1.2 panel :lc370eun-sem1 plase frimware

Hello sir, were you able to get dump ? I need it please. Hug

[lotas]

Re: Eeprom dump thread!

Hello sir, were you able to get dump ? I need it please. Hug

Post your non-working dump here, I'll try to fix it.

[KYBOSH]

Re: Eeprom dump thread!

I jumping into the firmware dump game and wasted to see if I could find the dump for a Samsung UN55MU800. The board number is CY-SM055FLLV6H. The chip is a WINBOND 25Q32JVIG. I did a quick search on this thread but didn't see anything. Perhaps I am not searching for it correctly?

Thank you in advance!

[Denis J]

Re: Eeprom dump thread!

try

Hello Lotas,
I finally took the time to copy the 2 firmwares
on the TV eeprom and everything went back in, the TV works again. I wanted to thank you a thousand times thank you

[Duranitron]

Re: Eeprom dump thread!

Need help guys.. need dump files of TCL- 43D2913D LED TV attached is the original bin files. thanks in advance..

[lotas]

Re: Eeprom dump thread!

Need help guys.. need dump files of TCL- 43D2913D LED TV attached is the original bin files. thanks in advance..

The software in the dump is fine, try with a clean eeprom.