-
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
I am well known for being an extremely patient person but you are certainly testing me and I do wonder if my time would be better spent elsewhere. This was the second time I have asked to to list the voltages in this manner, a lot of members dont ask twice they move on to another thread.
You said
Pson-0.49-sgnd-0.00-5vsb-0.50-sgnd-0.00-12v-00.2-sgnd-00.0-24v-00.0.
I said: list the results in a column:
pson = -0.49 Wrong? 4.9v?
SGND = -0.00
SGND = Missing
+5VSB= -0.50 Wrong ? 5v?
+5VSB= Missing
SGND= -0.00
SGND= Missing
12V= -00.2 cant guess 0.2 2.0 20.0
12V=Missing
SGND=-00.0
SGND= Missing
24V-00.0
24V Missing
13 pins 13 results
+5vsb = and so on.
Had you done so the results would be a hell of alot easier to read and you may have spotted your listing errors - assuming they are error as that is now what you said many posts ago?Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
Anyway I concede that you do not have 24VDC.
However what you need to see is if it is there initially.
You will need three arms for this or someone to help( its easier in the UK as a lot of our wall plugs have switches.)
With it all set up but not plugged in you need to probe the 24v pin and ground and keep it probed while you plug it in and still probing while you switch it on.
This will check if the 24v came on at all then went off. (As it did in that Sanyo thread I asked you to read)
(This could also have been achieved by wiring in the 2x12v bulbs Budm asked you to get.)Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
LOOK DUDE ENOUGH OF YOUR SMART MOUTH,MY METER IS WHAT IT SHOWS IT'S SET TO.WHAT YOU ASKED ME TO SET IT TOO,,,,,ANOTHER THING IM HAVEING A HARD TIME TRYING TO SET COLUMNS BECAUSE i DON'T USE A COMPUTER VERY OFTEN!AND YOU DON'T NEED TO HELP ME..ALSO FROM THE START I WAS RIGHT MY METER WAS SET RIGHT,,,,ALSO WHEN YOU TALK TO PEOPLE THAT WAY YOU GET POOR RESULTS,,,AND I LIKES USING CAPS BECAUSE I AM SHOUTING..YOU HAVE EMBRASSED YOURSELF AND THIS FOURM...I AM NOT A HICK..IM 48,YEARS OLD I AM A AUTO TECH,I CAN FIX ANY CAR ANY TIME ANY BRAND..LIKE YOUR INFO SAYS ON YOUR INFO...YOU SEE I DON'T BRAGG ABOUT MY BACK GROUND LIKE YOU..YOU KNOW I WILL FIX THIS PROBLEM WITH OR WITHOUT YOU..I WHOULD BE ASHAMED OF MYSELF IF I WERE YOU..TALKING TO PEOPLE THAT WAY..IF I DID THAT I WHOULD GET FIRED..ALSO MABEE YOU SHOULD GET A JOB GETTING PAID....Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
Chill out, I'm out of here... I give up! We have tried to be polite!
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
CHILL OUT YOU NEED TO REVERSE WHAT YOU JUST SAID..IT'S NOT ME IT'S YOU.. Were did I get upset? It was only after you lost your temper...Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
When did I loose my temper?
You just lost it a few posts ago, I have remained calm throughout.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
I want to thank all the people that have been nice enough to help me! A lot of people they get electronics such as me,like to try to repair them,and it's not that we are being cheap,just want to know how things tick,and with all the wasted things that us as Americans throw away everyday is a wast..and to know that forums like this is here too help FREE OF CHARGE..I thank EVERYONE..I know what thankless jobs we have,and we work at everyday..and you find a FOURM like this that SOME people like to take the time to help you out!some even sit down a draw out a circuit scamatics,too help now how many will do that?SO TOM66 THANKS FOR NOTHING WE WERE SOO CLOSE..some people will read this post and think man why did they get SOO close to fixing somthing and then SOMEONE MESSED IT ALL UP..SO IM GOING TO GET IT REPAIRED AT A SHOP ...AND WILL REPORT THE FINDINGS..I WILL HOLD MY END OF THE BARGIN..give me a few days for the results ..once again thank youLast edited by tomstr; 12-02-2012, 02:31 PM.Comment
-
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
Ok took my tv to a repair shop..found out it was the power supply,the windings were bad and a couple of caps. The shop even let me solder the caps in.they also told me that i was using my meter the right way..SO THANKS FOR ALL THE HELP..AND TOM IM SORRY I HAD YOU MIXED UP WITH SELLDOOR..AND WHO EVER MADE THE DRAWINGS OF THE CIRCUIT THANKS..NO HARD FEELINGS SELDOOR OR HOW EVER U SAY IT!forgive me of my spelling..Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
The winding tested good. No caps were failed -- at least, not as far as the TV would be concerned.
Very confused right now!Last edited by tom66; 12-03-2012, 01:44 PM.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
It is what it is sorryComment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
It is a story, that is what it is. How did you fix the bad windings on the transformer? I guess you would have to unwind it -- good luck!
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
Yes, I sure like to know how the winding is fixed or if the board is working now.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Hi all,
hopefully someone on this board has an idea on how to begin with troubleshooting this problem.
The monitor AOC AGON AG273QCG (curved 27" QHD monitor) has problems refreshing every 1 to 2 seconds or so. A line appears in the middle of the screen and the lower half of the screen is shifted to the right.
See attached picture.
I am leaning towards an issue with bad soldering of the graphics chip, because the problem used to go away after some time (minutes) but now it is here to stay.
However, this could also be related...08-12-2023, 02:36 AM -
Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.
The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.
Original T-con:
Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.
First replacement T-con:
I thought it might be t-con and ordered new t-con from china(supposedly tested)... -
Hello gurus, hope you can assist me...
I have a Sony KDL.40P3600, with an issue on the left side of the screen (pictures attached).
I think the problem is the panel, but before send it to trash, i would like to get a second opinion.
Thanks in advance. -
Hello all
I pick this up free as a repair project for the holidays.
The original symptom was power cycling after 3-4 seconds with a single red light flash.
To remedy this I went through and unplugged each component 1x1 and discovered that when the FFC cables were disconnected the backlights stayed on and the TV did not reboot.
I tried remove one or the other to see which side of the display was causing the issue (expecting to see half a picture to show) but didn't see anything. But the boot loop only appears when the top FFC cable (right side... -
Hi all, I've recently acquired a linsar 75uhd520 TV, there was nothing on the screen when I first got it, now after finding around I've managed to get a picture but it has loads of lines running through it, I've uploaded a Google image of what the picture looked like, i will upload photos of it soon, also, I didn't get a remote with it, I've went through all my remotes trying to get one to work it but had no luck, does anyone know what remote would work this set please??...
Comment