Sanyo dp42848. No picture no sound?has anyone found the problem
Collapse
X
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
You said
Pson-0.49-sgnd-0.00-5vsb-0.50-sgnd-0.00-12v-00.2-sgnd-00.0-24v-00.0.
I said: list the results in a column:
pson = -0.49 Wrong? 4.9v?
SGND = -0.00
SGND = Missing
+5VSB= -0.50 Wrong ? 5v?
+5VSB= Missing
SGND= -0.00
SGND= Missing
12V= -00.2 cant guess 0.2 2.0 20.0
12V=Missing
SGND=-00.0
SGND= Missing
24V-00.0
24V Missing
13 pins 13 results
+5vsb = and so on.
Had you done so the results would be a hell of alot easier to read and you may have spotted your listing errors - assuming they are error as that is now what you said many posts ago?Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
Well in the picture you posted when we said you did not have the meter set at 200vDC what setting did it show.? You have 200, 2k,20k,200k,2M and 200M. OhmsPlease upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
Anyway I concede that you do not have 24VDC.
However what you need to see is if it is there initially.
You will need three arms for this or someone to help( its easier in the UK as a lot of our wall plugs have switches.)
With it all set up but not plugged in you need to probe the 24v pin and ground and keep it probed while you plug it in and still probing while you switch it on.
This will check if the 24v came on at all then went off. (As it did in that Sanyo thread I asked you to read)
(This could also have been achieved by wiring in the 2x12v bulbs Budm asked you to get.)Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
LOOK DUDE ENOUGH OF YOUR SMART MOUTH,MY METER IS WHAT IT SHOWS IT'S SET TO.WHAT YOU ASKED ME TO SET IT TOO,,,,,ANOTHER THING IM HAVEING A HARD TIME TRYING TO SET COLUMNS BECAUSE i DON'T USE A COMPUTER VERY OFTEN!AND YOU DON'T NEED TO HELP ME..ALSO FROM THE START I WAS RIGHT MY METER WAS SET RIGHT,,,,ALSO WHEN YOU TALK TO PEOPLE THAT WAY YOU GET POOR RESULTS,,,AND I LIKES USING CAPS BECAUSE I AM SHOUTING..YOU HAVE EMBRASSED YOURSELF AND THIS FOURM...I AM NOT A HICK..IM 48,YEARS OLD I AM A AUTO TECH,I CAN FIX ANY CAR ANY TIME ANY BRAND..LIKE YOUR INFO SAYS ON YOUR INFO...YOU SEE I DON'T BRAGG ABOUT MY BACK GROUND LIKE YOU..YOU KNOW I WILL FIX THIS PROBLEM WITH OR WITHOUT YOU..I WHOULD BE ASHAMED OF MYSELF IF I WERE YOU..TALKING TO PEOPLE THAT WAY..IF I DID THAT I WHOULD GET FIRED..ALSO MABEE YOU SHOULD GET A JOB GETTING PAID....Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
anyway i concede that you do not have 24vdc.
However what you need to see is if it is there initially.
You will need three arms for this or someone to help( its easier in the uk as a lot of our wall plugs have switches.)
with it all set up but not plugged in you need to probe the 24v pin and ground and keep it probed while you plug it in and still probing while you switch it on.
This will check if the 24v came on at all then went off. (as it did in that sanyo thread i asked you to read)
(this could also have been achieved by wiring in the 2x12v bulbs budm asked you to get.)Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
Chill out, I'm out of here... I give up! We have tried to be polite!Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
When did I loose my temper?
You just lost it a few posts ago, I have remained calm throughout.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
I want to thank all the people that have been nice enough to help me! A lot of people they get electronics such as me,like to try to repair them,and it's not that we are being cheap,just want to know how things tick,and with all the wasted things that us as Americans throw away everyday is a wast..and to know that forums like this is here too help FREE OF CHARGE..I thank EVERYONE..I know what thankless jobs we have,and we work at everyday..and you find a FOURM like this that SOME people like to take the time to help you out!some even sit down a draw out a circuit scamatics,too help now how many will do that?SO TOM66 THANKS FOR NOTHING WE WERE SOO CLOSE..some people will read this post and think man why did they get SOO close to fixing somthing and then SOMEONE MESSED IT ALL UP..SO IM GOING TO GET IT REPAIRED AT A SHOP ...AND WILL REPORT THE FINDINGS..I WILL HOLD MY END OF THE BARGIN..give me a few days for the results ..once again thank youLast edited by tomstr; 12-02-2012, 02:31 PM.Comment
-
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
Ok took my tv to a repair shop..found out it was the power supply,the windings were bad and a couple of caps. The shop even let me solder the caps in.they also told me that i was using my meter the right way..SO THANKS FOR ALL THE HELP..AND TOM IM SORRY I HAD YOU MIXED UP WITH SELLDOOR..AND WHO EVER MADE THE DRAWINGS OF THE CIRCUIT THANKS..NO HARD FEELINGS SELDOOR OR HOW EVER U SAY IT!forgive me of my spelling..Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
The winding tested good. No caps were failed -- at least, not as far as the TV would be concerned.
Very confused right now!Last edited by tom66; 12-03-2012, 01:44 PM.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
On POST 43 I requested the reading of the windings. And the result was shown above. I made the drawing.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
It is a story, that is what it is. How did you fix the bad windings on the transformer? I guess you would have to unwind it -- good luck!
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Sanyo dp42848. No picture no sound?has anyone found the problem
Yes, I sure like to know how the winding is fixed or if the board is working now.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
Related Topics
Collapse
-
by JJAAMMThis was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.
Problem
TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode... -
by MikePCSHello,
I have a just of warranty 70" Samsung 6-series that out of the blue stopped getting a picture, but I had sound. During the initial outage, the picture came back momentarily and then faded out. The next morning the TV worked on a quick test, but trying it again later it didn't.
When I have the mainboard disconnected from the power supply, the TV powers on with full LED brightness and stays on
When I plug the mainboard in, the LEDs go bright-->dim--off -->repeat, while the red status indicator blinks 2x
WORKAROUND: Unplug one... -
by MgiffuneI have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started βfading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly βnew' Tcon board this time, and... -
by CyberPhoenixHello, Last week I bought the 50" Sony X80j tv everything was working fine, untill I plugged the tv in a ups power supply 650va the tv remote control became unresponsive and the TV became laggy after a while the picture quality isn't the same as before the tv seems less brighter and the picture is somehow blurry, people's faces don't look as natural as before, there is a mini orange-pink tint to the edge of people's faces especially in NETFLIX Dolby Vision like in One Piece ep1 Alvida skin tone, my intention was to protect the tv but something went wrong I checked the ups with a multimeter,...
-
by RauniHello, this is my first post on this forum, and my first attempted to repair a TV.
My Philips 58PUS7805/12 stopped working recently. It is not that old, about 5 years. We were on a trip for a few days and when we came back, it had stopped working out of a blue (Perhaps our house was hit by a lightning strike? Don't know.)
Read from a guide that I should test if the screen shows picture with one of the T-Con cables disconnected. Did that, it showed perfect picture (first on left, later on right side).
Read also that we should test what happens if we... - Loading...
- No more items.
Comment