Re: ME Firmware Cleaning Guide
hi thank you for this info.more power and goeblss
hi thank you for this info.more power and goeblss
-
-
Re: ME Firmware Cleaning Guide
Hi,
trying to clean ME region in HP Zbook 15 G3. Working with full BIOS dump, which is 16 MB (16777216 bytes), done using ch341a. MEAnalyzer says that Version is 11.8.70.3626 and Flash Image Tool is 11.0.22.3001.
Using Flash Image Tool v11.8.86.3877 (from package CSME System Tools v11 r46.rar) I get this error:
Error 16: Not a valid file type.
Error 10: Failed to open with processed commands.
Could the dump be corrupted or am I doing something wrong?
(Dump can be opened in UEFITool, no errors there).Comment
-
Comment
-
Re: ME Firmware Cleaning Guide
Here's the BIOS, or, more precisely, the full dump of IC that appears to contain BIOS:Comment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Re: ME Firmware Cleaning Guide
Thanks, I'll desolder the chip and try to read it again. Just to make sure - all we need is the main BIOS and not the EC chip's contents, right? (picture shows both chips).Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Re: ME Firmware Cleaning Guide
Hi, sorry for the delay. Dumps are attached:Comment
-
Re: ME Firmware Cleaning Guide
Hello Friends ..some questions !
1 - Why we must disable : Generates intermediate file in FTIC ! yes ti no
2 - When we must clean : PMC / PHHC / PHY / GSC ..
Any explaination of the rule of this firmware repository !
Thank youComment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
-
Re: ME Firmware Cleaning Guide
Thank youComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: ME Firmware Cleaning Guide
clean my bios fileComment
-
Re: ME Firmware Cleaning Guide
you have at post #1 in this thread, a tutorial on how to clean the ME region.. with that program it will hurt you more... if you don't succeed, look for a thread on the website in the "bios only" section with the name and model of the laptop and post the content of the bios chip there, and someone will help you..Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
If you have to clean the ME firmware on **some microsoft surface models the touchscreen can stop working.
** Some models do not need this fix.
*You should install the latest updates from microsoft,including the driver packs before assuming there is a hardware problem.* - See Post #2
EDIT: If nothing else works try this fix - https://www.badcaps.net/forum/showpo...8&postcount=40
Always check a working dump from the same model using FIT.If the working dump default setting for "Integrated Sensor Hub Supported" is set to "NO"... -
i know a tool https://github.com/MuertoGB/MacEfiToolkit is capable of SN change and Clean ME but not updating EFI Version of the BIN file. is there a guide or a BIOS structure to update the firmware??...03-06-2024, 01:34 AM -
Hi,
I have an Anker SoundCore 2 (A3105) that I saved from the trash (well, I guess there's a reason why it was supposed to go into the trash...). The problem is that it always turns off after a few seconds (sometimes it stays on a bit longer, between 30 and 60 seconds, but it still turns off). The power light turns on and the bluetooth light starts blinking, but both abruptly turn off again. The "turn off sound" is still played after the lights turn off. Sometimes, it also loops the on-off cycle several times without me pressing any buttons. If I connect an AUX cable, music...08-11-2025, 02:14 PM -
Hello to everyone ,
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help... -
Hi guys.
I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.
So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
Got New chip and writes good.
THE PROBLEM...
It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.
Does anyone have a Good Firmware I can have?...
Comment