I was thinking there's supposed to be a red standby light on front, when tv is off and plugged in but none of my working tvs have that, it must be normal.
can't get a menu, flow chart says if 12 and 3.3 are good at g board then go for the a board but says if no menu seen, then it's lvds cable, tcon or panel, tried a couple different tcons, same results.
can't get a menu, flow chart says if 12 and 3.3 are good at g board then go for the a board but says if no menu seen, then it's lvds cable, tcon or panel, tried a couple different tcons, same results.
sony doesnt show firmware for this KDL-46S4100; but going down the line it does have updates for kdl-46s504 and kdl-46s5100, wonder what do you good folks think of trying one of those?
I was getting the solid red, green, blue then striped loop on screen, that seems to have went away, I got different a board, with the first one I have to unplug the bl-on connector from a board to g board, then backlights come on, soon as the connector make contact the lights go off, with second a board, I can have the bl-on connected but if everything is hooked up no backlight or anything, if I disconect lvds cable from a board side, backlights come on in 8 seconds BUT if unplug lvds cable from tcon side, no backlighs or anything and whatever I do the sony logo never lights up, not sure if it is suppose to and I never get a menu.
not sure, was getting a test pattern loop, now that's gone, just solid color screen but only with lvds cable unplugged from the a board side, when lvds cable unplugged from tcon side, no backlight or anything.
I just checked my Sony Kdl-46S4100, When it is pluged in there are no led's lit. only when the power button is pushed does a green led light up. when turned off the green led turns off.
I just checked my Sony Kdl-46S4100, When it is pluged in there are no led's lit. only when the power button is pushed does a green led light up. when turned off the green led turns off.
Comment