Re: Sony Bravia KDL-46XBR4 screen flashing and colored lines!
Pictures of boards . use manage attachments at bottom of scroll.
splitcrete
Badcaps Veteran
Last Activity: 07-18-2015, 04:45 AM
Joined: 12-13-2012
Location: warwick ri
-
Re: Panasonic TH-42PD60U (Banging my head against a wall.)
Before you power the set up again,make sure all board hold down screws are in and tight.Leave a comment:
-
Re: New tool, Aoyue 8800! Desoldering just got easy!
Check this site out...Hakko on sale.
[url]http://www.tequipment.net/Hakko/FR-300/Desoldering-Equipment/[/url]
Hope this helps.Re: New tool, Aoyue 8800! Desolderin...pe this helps.Re: New tool, Aoyue 8800! Desoldering just got easy!
Check this site out...Hakko on sale.
[url]http://www.tequipment.net/Hakko/FR-300/Desoldering-Equipment/[/url]
Leave a comment:
-
Re: Replacement Panel from partstore.com (Best Buy)
A couple years ago I ordered a panel from them. When I received it the box it was in looked like it was dragged, and kicked all the way to my house. Need I say it was in two pieces. UPS was the carrier and they suck. I sent it back and after a month I got my money back. I will never buy from them again.Leave a comment:
-
Re: Seiki SE322FS
LEDs are in. Powered it up, and all I get now is blinking LED back lights. on off on off on off very fast. Any ideas before I toss for junk.Leave a comment:
-
Re: Seiki SE322FS
Three strips 10 leds each . The set itself is a piece of crap.Leave a comment:
-
Re: Seiki SE322FS
This set is just an experiment . The copper wire I used I got from Michaels' crafts store.
Wire is for beads 20 ga. it has a coating that I took off with a nail file.Leave a comment:
-
Re: Seiki SE322FS
Yes it is . It was on the back burner.
I hope this works.Leave a comment:
-
Seiki SE322FS
This tv has blown leds . I am rebuilding the strips with 1-w leds I got from e-bay. One strip done .Will post back with results of all this work.... -
Re: KDL40S4100 Screen dim, slow to refresh
If you changed the main board it will need a firmware update.Leave a comment:
-
Re: Pioneer Plasma TV on standby and won't power on
Is the lock out switch, normally open or normally closed. I would disable that bad boy firstLeave a comment:
-
Re: LG 37LC55 solarised pic
No one likes a showoff Alastair...LOLLeave a comment:
-
Re: LG 37LC55 solarised pic
Those as15 chips are sensitive, temps. over 500-F or 258-C will cook them. I only use a small amount of solder paste with my smallest drag solder tip. Paste melts at 430-F or 218-C . Takes practice. The chips from China I found have a 2 in 10 D.O.A rating .That is from my experience using them.It is also useful to use an IR Thermometer to monitor the chips heat. Hope this helps.Leave a comment:
-
Re: Panasonic TC-P46S1
Day 3 Its still working with a beautiful picture. How long should I test it until its ready for sale ?Leave a comment:
-
Re: Panasonic TC-P46S1
The two boards....Leave a comment:
-
Re: Panasonic TC-P46S1
I went over the board don't think I missed any thing, every thing was the same except the caps. The inductor coils were the same I will post pics as soon as I get a chance.Leave a comment:
-
Re: Panasonic TC-P46S1
My thinking is that I went from 46" sc board to 50" sc board the inductors, and caps would be of a higher value. I would never try it the other way around. So far it is running perfect I don't think I will have a problem.Leave a comment:
-
Re: Panasonic TC-P46S1
Day 2, This TV is still working great.Leave a comment:
-
Re: Panasonic TC-P46S1
The boards are almost exact only to caps different . Nothing getting hot picture is spot on . If it blows up I will post back with a damage report...Leave a comment:
-
Re: Panasonic TC-P46S1
I gave up on fixing the SC board. I got a board from e-bay for a TC-P50S1
TC-P46S1 It works just fine now. So TNPA4782 AC ... Can be replaced with TNPA4782 ...AB
46" 50"Leave a comment:
No activity results to display
Leave a comment: