Samsung UN55D6050TF Power Light Blinking

[mmartell]

Re: Samsung UN55D6050TF Power Light Blinking

You did but I didn't know If it was 4 total. Different strips per picture. Man if you would that would be cool. Do you think they would get messed up being shipped?

Just so we're clear I'm talking about shipping individual leds not the whole strip(s).

[selldoor]

Re: Samsung UN55D6050TF Power Light Blinking

Sorry for the confusion - I was simply trying to help tw2005 That was the reason I headed my post OFF TOPIC. that is nothing to do with this thread.
The link I gave is for leds where the light comes out sideways to how they are mounted so have only specific use.

Gamethriller - it will not be easy to get the panel apart but I expect it will have the leds mmartell is offering.

[gamethriller]

Re: Samsung UN55D6050TF Power Light Blinking

I know the panel isn't easy to get apart. But I have convinced I can do it. And mmartell if you can fit full panel leds in a envelope your a bad man. Lol

[mmartell]

Re: Samsung UN55D6050TF Power Light Blinking

Ok for the third time these are JUST THE LEDS. Tiny little leds about the size of an insect. So yes I can fit them in an envelope.

[gamethriller]

Re: Samsung UN55D6050TF Power Light Blinking

Lol wow, I was joking around lighten up.

[budm]

Re: Samsung UN55D6050TF Power Light Blinking

I no longer have the set but I DO have a strip with some good leds on it. I can rip some off and toss them in an envelope if you'd like to try replacing a few individually.

Hi mmartell, can I get some of those LEDS?

[gamethriller]

Re: Samsung UN55D6050TF Power Light Blinking

I guess that counts me out.

[mmartell]

Re: Samsung UN55D6050TF Power Light Blinking

Tear it down so I know we're dealing with the same leds and I will send you some replacements.

[gamethriller]

Re: Samsung UN55D6050TF Power Light Blinking

Ok ill do it later today.

[gamethriller]

Re: Samsung UN55D6050TF Power Light Blinking

Mmartell is it straight to lay the face down flat and pull e b everything away from the screen?

[mmartell]

Re: Samsung UN55D6050TF Power Light Blinking

That's the way I did it. I had it laying down on something like a large footstool which had a smaller area than the screen so I could lower the metal frame to the floor (and out of the way) when its screws were removed since you need to get to the clips under it to get the disassembly under way.

[gamethriller]

Re: Samsung UN55D6050TF Power Light Blinking

Wow I actually have something I could use to do that thanks.

[gamethriller]

Re: Samsung UN55D6050TF Power Light Blinking

Finally opened her up. Pictures :-) I have about 5 bad lights maybe 6 on the right strip :-/

[gamethriller]

Re: Samsung UN55D6050TF Power Light Blinking

So I shaved down the LEDs and tined the tops with solder and we have bright lights lol.

[gamethriller]

Re: Samsung UN55D6050TF Power Light Blinking

More Pics

[gamethriller]

Re: Samsung UN55D6050TF Power Light Blinking

...

[Ltank]

Re: Samsung UN55D6050TF Power Light Blinking

Did you jumper out the shorted leds or replace them? The pic shows one burnt but I did not see the repair? I had a strip with 9 shorted leds and I damaged the traces trying to remove the old leds. Could we get a little more detail on the repair of the strip? I tried heat to remove them but they are glued to metal strip. I tried small sharp cutters to break the led in half and loose from strip. Not Pretty

[gamethriller]

Re: Samsung UN55D6050TF Power Light Blinking

I didn't remove them. I shaved down the LEDs with a razor knife. The one's that didn't work. You can see In the picture I just took solder to complete the led by bypassing the actual broken led. I only had a couple bad lights. I mainly did this for testing untill I find replacement leds. I did find a few post on ebay with full led strips for r and l for around 100. I never removed the led. If I was to get replacements I would solder the new one's on top of the old and call it a day.

[BeatingU]

Re: Samsung UN55D6050TF Power Light Blinking

First of all thank you to all you who posted on this thread b/c i have been looking for awhile about this tv especially in regards to the exact same problem with the exact same tv. Using a multmeter i noticed the entire left side will light up (flash actually since i cant get them to stay completely on). However the right side is a different story, the top 9 or 10 led's do not light up at all and then there is one lone led in the middle that doesnt light up but the rest down do.

Ltank - did you ever get your led's/tv to come back on?
gamethriller - could you explain to complete dummys (like myself) how do you bypass the bad led's with solder? Also, How do i get the led's to stay lit without having to keep touching them with the positive multimeter (just flash's)?