Dell n5010 can be converted from graphic version to non graphic
Collapse
X
-
-
Re: Dell n5010 can be converted from graphic version to non graphic
Thank you friends for your guidelines and images.
I will try this. Hope I get success in it.Comment
-
problem with Dell n5010 converted from graphic version to non graphic
hi Guys
i followed all the instructions and did the conversion...
Display comes fine and i can enter bios and do saves settings and all...
But ..... the laptop doees not boots up to post screen ......
neither it is able to boot with USB, CD , HDD or any other media ...
the display just hangs on a plane white screen after the Dell logo...
Alt+ CTrl + Del has no action.....
Even tried to flash the Bios ...with a good one .....but no use .....
the problem is the same ...
Thought that might be problem in particular motherboard ... i tried the same on another board
but ...struck on same page .....
any ideas guys
WaitingComment
-
Re: Dell n5010 can be converted from graphic version to non graphic
If there was one can communicate with this Chinese site, there is his subject shows the success of the experiment
http://www.chinafix.com/thread-875435-1-94.htmlComment
-
Re: Dell n5010 can be converted from graphic version to non graphic
This is from another site some one can try and let us know
PU5301 > TPS51611
PR5311 > 90.9K
PC5313 > 2.2U 10V
PC5314 > 68P50V
PR5312 > 1.69K
PC5315 > 22U 10V
PR5325 > 18.7K
PC5317 > 3300P 50V
PR5301 ,PR5302 > 0 OHM
PR5327 ,PR5332 > 330 OHMS
PC5320 ,PC5322 ,PC5323 ,PC5324 ,PC5325 ,PC5314 > 33P 50V
PC5321 > 22U 50V
PR5331 > 29.4K
PR5330 > 86.6K
PR5328 > 24.3K
PR5323 > 2.2 OHM
PC5301 > 2.2U 10V
PC5316 > 22U 16V
PU5302 > SI7686DP
PU5303 > SIR460DP
PC5302 ,PC5303 > 10U 25V
PL5301
PTC5301 ,PTC5302 >330U 2V
PR5313 ,PR5314 ,PR5317 > 0 OHM
PR5319 > 1.69K
PR5334 ,PR5335 > 100 OHMS
And also
1. R2001 > 2.37K
2. R1305 > 4.37K
3. R2603 > 0 OHM
4. L2602
5. RN2001 > 0 OHM
6. RN2004 > 0 OHM
7. RN2002 > 2.2K
8. RN2005 > 1500 OHMS
9. RN2006 >2.2K
10. R5407 > 0 OHM
11. R2309 > 10K
12. RN7702 > 0 OHM
13. R2601 > 0 OHM
14. RN5501 ,RN5502 , RN5505 , RN5507 , RN5509 > 0OHM
15. R2611 > 0 OHM
16. R2201 > 0 OHM
17. R2205 > 0 OHM
18. X2301 > 25 MHZ
19. R2303 > 1M
20. C2307 ,C2308 > 12P 50V
21. R3903 > 0 OHM
22. R3904 > 0OHM
23. Q3902 > PMBS3904
24. RN7704 > 33 OHMS
25. R3714 > 10K
26. RN7702 > 0OHM
27. RN2201 , RN2202 , RN2203 , RN2204 > 0 OHM
28. Q7701 > 2N7002EDW
29. RN7707 > 2.2KsigpicComment
-
Re: Dell n5010 can be converted from graphic version to non graphic
I finished the job. Unfortunately the laptop is giving white display. I can see that functioning of the laptop is ok.
I think i made some mistake. can any body help me.Comment
-
Re: Dell n5010 can be converted from graphic version to non graphic
I did the conversion to 4 motherboards but it gives white display to me, and programmed a working file to the 256 kb bios and 4 mb bios... and i want to say i removed graphics chip same output and after removed graphics chip and vram's all and get same output, why not comes display please help me.
..Comment
-
Comment
-
Re: Dell n5010 can be converted from graphic version to non graphic
Hello dears,
I tried those steps and its grate work I got display and able to enter bios settings, but Hdd not booting after showing in bios, please give me replay for this problem
ThankuComment
-
Related Topics
Collapse
-
by BowlineMy question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?
Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?
My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
I have tried multiple different Dell power adapters. My Dell... -
by minaedwardHi all
I have a dell n5010 that shows black screen after the dell logo and freezes
But when I remove the keyboard it works fine and boot the windows
The keyboard is working as I can press F1 and F2 and inter the bios settings and change it
But after the dell logo it causes the laptop to freeze
Any ideas why ? -
by sahamipoorhello...
the Dell XPS L502x ( Model P11F ) [ DAGM6CMB8D0 rev.D ..3 of lines output LVDS from PCH has short ohm(0 -70) than LCD displat turn ON but is white !!!
i decide to change LVDS ports to Lcd from EXT_LCD graphic Studio Discrete to No need it LVDS lines of PCH use...
according to ُSchematic ,I changed any resistor and... Config_0 and Config_1 EC...but:
1- EXT_LCD_PWM no voltage to enable pwm
2-EXT_LVDS_VDDEN no High to Enable LCD_vcc
and screen is turn off and fan is high Speed!!
Question:
I need to Use Discrete graphic nvidia EXT_LCD ports... -
by F R 2568Hello all,
this is my first post, so if I make mistakes please do not hesitate to point them out, thank you in advance.
I got a Dell Latitude 5420 (Service Tag: 7RFM6D3, Motherboard: GDF40 LA-491P Rev.: 2.0 (A01)) which does not start and I want to repair it. These are the symptoms:
If the laptop is only connected to the AC adapter (battery removed):
When I press the power button, the keyboard backlight and the display backlight are turning on. Caps key light is lightning, but key does not respond to pressing it.
The power/battery... -
by diamonI have a Dell Latitude 5530 with a damaged RJ45 network connector. See the attached pictures.
Have already searched on Farnell / Aliexpress / Ebay and had contact with several suppliers on Aliexpress and Ebay, but they cannot deliver this connector.
Is there someone inside the EU, who has these connector(s) or perhaps defective motherboard(s) for these laptop models I have mentioned in the topic title.
Pictures of these boards:
Dell Latitude 5520 https://www.ebay.com/itm/256052956663
Dell Latitude 5530 https://www.ebay.com/itm/125844181534
Dell...4 Photos - Loading...
- No more items.
Comment