Philips 50PUS6272/05 image flipped and upside down

[rash.m2k]

Hi all,

Seems this tv works all fine but the image is mirrored and also upside down, other than that seems to work all fine.

Is this a bad tcon or mainboard?

[vinceroger69]

Re: Philips 50PUS6272/05 image flipped and upside down

have you fitted a new mainboard ? as this could cause it there maybe a way in the service menu etc too flip the image i think the menu is 062596 but dont alter anything yet as not sure there is a flip optionched this
have you watched this? https://www.youtube.com/watch?v=UGz126wYCO4

[rash.m2k]

Re: Philips 50PUS6272/05 image flipped and upside down

have you fitted a new mainboard ? as this could cause it there maybe a way in the service menu etc too flip the image i think the menu is 062596 but dont alter anything yet as not sure there is a flip optionched this
have you watched this? https://www.youtube.com/watch?v=UGz126wYCO4

Nope this is the original board, i have seen that video but there is no option in the menu

[vinceroger69]

Re: Philips 50PUS6272/05 image flipped and upside down

can you upload pictures of your service menu screens

[rash.m2k]

Re: Philips 50PUS6272/05 image flipped and upside down

can you upload pictures of your service menu screens

See attached, can't find anything about flipping the image

[chrismurphy]

Re: Philips 50PUS6272/05 image flipped and upside down

reload firmware or go to service menu and select correct model screen

[rash.m2k]

Re: Philips 50PUS6272/05 image flipped and upside down

reload firmware or go to service menu and select correct model screen

I have updated the software the screen selected is the correct one, I haven't changed the board it matches the screen

[arge45]

Re: Philips 50PUS6272/05 image flipped and upside down

Hola!
Guys, Im having the same problem. Philips sent me a file to do a forced upgrade but no success on that. The image is flipped and mirrored still.Can you please share the OP1 and OP2 values. Also, sharing your experience resolving this would be very appreciated.

[zen]

Re: Philips 50PUS6272/05 image flipped and upside down

Hi all

Been here before myself

The N V M with red dot next to the L V D S lead has corrupted . It holds the display data .

Tried re entering screen code , which is a 3 digit number , normally printed onto label at back of TV .

In my case screen blanked & lost picture all together .

To recover , managed to pull data from a working set , then program up chip on fault TV .

Will check to see if i have files .

Post the display type & part number , cheers Xen

[zen]

Re: Philips 50PUS6272/05 image flipped and upside down

Have just attached a bin file for the N V M i mentioned.

It's for the exact display type in picture posted & should restore image .

[mjn2710]

Re: Philips 50PUS6272/05 image flipped and upside down

Have just attached a bin file for the N V M i mentioned.

It's for the exact display type in picture posted & should restore image .

Hi! I am having the same issue with the flipped image and cannot solve. Is there something I should try to do with this file?

[zens electronics]

Re: Philips 50PUS6272/05 image flipped and upside down

If your TV uses same display and main board , program the chip i mentioned with bin file provided .

[Diah]

Re: Philips 50PUS6272/05 image flipped and upside down

If your TV uses same display and main board , program the chip i mentioned with bin file provided .

not every normal user will have knowledge and tools for this tips. the best easy downgrade or update the firmware... it will take a place at NVM
googling will find allot sources of firmware depending on chassis and model No, for example

[zens electronics]

Re: Philips 50PUS6272/05 image flipped and upside down

Yes, sorry , i didn't consider that .

[Davi.p]

Re: Philips 50PUS6272/05 image flipped and upside down

Hi, re enter option codes in service menu, you will find them on the back cover sticker.. bye.

[William1967]

Re: Philips 50PUS6272/05 image flipped and upside down

Press 062598 menu followed by the setoption number you find on the rear cover. Wait for 30 seconds and remove the power cable for a short time, reconnect the power. All options must be correct now also the display option.

[zen]

Re: Philips 50PUS6272/05 image flipped and upside down

Hopefully the above will work .

Unfortunately in my case ended up with a completely blank display , due to data corruption of N V M i mentioned , which is why i needed to reprogram chip using good data from a working set .

[William1967]

Re: Philips 50PUS6272/05 image flipped and upside down

Hopefully the above will work .

Unfortunately in my case ended up with a completely blank display , due to data corruption of N V M i mentioned , which is why i needed to reprogram chip using good data from a working set .

The way I explained works without a working display. The tv has a lot of pre programmed options onboard, you only need to program it with the so called OPTION CODE.