Philips 65PUS8518/12 distorted image after main board replacement

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tuner2000i
    Member
    • Jun 2018
    • 26
    • Romania
    #1

    Philips 65PUS8518/12 distorted image after main board replacement

    hello everyone,

    I don't normally do tv repairs but this is a case with my personal TV which got fried together with many other electronics in my house after a thunderstorm.

    The TV is a Philips 65PUS8518/12 which had no power. I measured and concluded that the main board was probably fried through ethernet or hdmi. I found a board with same number 715GD328-M0F-B00-005Y (I had G) but from a 55PUS8518. The TV starts but the image is doubled, distorted. I need to set the panel code which is 016 according to the sticker on the back but I can not seem to do it.

    I am able to access 2 menus, 062596 + OK and Home+1999+backspace to enter factory menu. I am however unable to change the Panel ID which is set to 2. I tried all buttons and I can not change that value. Also I tried 062598 + Home + 016 and 062598 + Menu + 016 and nothing happens.
    I also replaced three 8 pin small chips on the board which I thought are eeprom's hoping that the settings will also update but with no luck. I am not sure where these settings are stored. If they are in the nand I do not have a reballing machine to do it anymore.

    I searched the forum for NVM file and i could not find any. I attached the NVM dump from the 55PUS8518 board if that helps.
    Any help will be kindly appreciated.
    Attached Files
    Tags: None
    • tuner2000i
      Member
      • Jun 2018
      • 26
      • Romania
      #2
      I found some SM which is not from this model but it said the code 062598 + Home + 016 should be entered from a normal RC remote. The original tv remote is both IR and bluetooth. Even though I disabled the bluetooth i tried today with a remote which is IR only again without success.

        Comment

        • lotas
          Badcaps Legend
          • Jan 2016
          • 4555
          • Russia
          #3
          Originally posted by tuner2000i
          I found some SM which is not from this model but it said the code 062598 + Home + 016 should be entered from a normal RC remote. The original tv remote is both IR and bluetooth. Even though I disabled the bluetooth i tried today with a remote which is IR only again without success.
          After software updates this method no longer works, the only option is to find NVM for your TPM23.1E LA chassis and for your model and panel or look for a motherboard for your panel.

            Comment

            • tuner2000i
              Member
              • Jun 2018
              • 26
              • Romania
              #4
              thanks for the reply lotas, at least i am not wasting my time with the remote buttons anymore. I found another board but before buying, does anyone here have this NVM, if yes please share even in DM. I was not able to find anywhere NVM's newer than 2019

                Comment

                • lotas
                  Badcaps Legend
                  • Jan 2016
                  • 4555
                  • Russia
                  #5
                  Unfortunately, there isn't one, but if there was, I would help you.

                    Comment

                    • Davi.p
                      Hobbist Tech
                      • Sep 2009
                      • 4301
                      • Italy - Milan
                      #6
                      Which are the keys you press to navigate to menus in service?

                        Comment

                        • tuner2000i
                          Member
                          • Jun 2018
                          • 26
                          • Romania
                          #7
                          I pressed Home+1999+backspace. I fixed the TV, i managed to obtain the NVM file from a local tv service. if anyone needs it, send me a DM

                            Comment

                            • lotas
                              Badcaps Legend
                              • Jan 2016
                              • 4555
                              • Russia
                              #8
                              Originally posted by tuner2000i
                              I pressed Home+1999+backspace. I fixed the TV, i managed to obtain the NVM file from a local tv service. if anyone needs it, send me a DM
                              Yes, you found the NVM file quickly, you are lucky.

                                Comment

                                Previous template Next

                                Related Topics

                                Collapse
                                • Dani_2024
                                  Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                                  by Dani_2024
                                  Hi and thanks in advance for any input you might provide!
                                  I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                                  Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                                  Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                                  5 Photos
                                  10-28-2024, 05:06 PM
                                • jb_Bak
                                  Sony xbr-65x900c main board issues?
                                  by jb_Bak
                                  Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                                  Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                                  Power Board Connector that goes to Main board
                                  CN6401
                                  Pin 01 NC
                                  Pin 02 NC
                                  Pin 03 "BL_ON": 0V
                                  Pin 04 "N/C"
                                  Pin 05 "STBY 3.3V": 3.5V
                                  Pin 06 "GND": N/C
                                  Pin 07 "AC_OFF"...
                                  09-27-2021, 04:52 PM
                                • JDC
                                  (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
                                  by JDC
                                  ONN 100012588
                                  Issue: No Power, Then Rebooting After Main Board Change

                                  Short answer: replace main board and power board
                                  Technical answer: replace main board and Q306 & Q307 on power board.

                                  Long answer:

                                  TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
                                  07-15-2022, 07:39 AM
                                • m1ch43lzm
                                  HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                                  by m1ch43lzm
                                  Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                                  Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                                  05-12-2025, 08:37 PM
                                • cheeky2
                                  Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
                                  by cheeky2
                                  I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
                                  Obviously the same LVDS connector for the screen connection...
                                  05-25-2024, 03:27 AM
                                • Loading...
                                • No more items.
                                Working...