Eeprom dump thread!

[RRice25541]

Re: Eeprom dump thread!

nop still not working,
I can put the code from an Emerson ELEFW328 on the board and the tv will come on fine all functions work,, except that i have to go into the service mode and change LVDS_ODD to LVDS_EVEN to correct the image..
also the image is upside down..
I couldn't find a way to change the model info, actually i never saw the model number listed anywhere
couldn't find a way to flip the image in there anywhere either.

The code from the original eeprom and the corrected eeprom you uploaded will allow the tv to come on but there is no image

[lotas]

Re: Eeprom dump thread!

So it's not the firmware of the Element ELEFW505 (the problem is in the board itself)
I don’t understand what it means to “put the code from Emerson ELEFW328”, do you mean rearrange the SPI Flash itself with firmware from one board to another?
What is your panel? Number of your panel (matrix).

[RRice25541]

Re: Eeprom dump thread!

If i take the code from the elefw328 and write it to the eeprom using the VGA connection from my RT809F programmer, the tv works fine except for the image being upside down.
the panel is V500HJ1-RX01

[lotas]

Re: Eeprom dump thread!

ELEFW505 has Full HD panel and ELEFW328 HD Ready. In service mode, you can not flip the image (mirror...)

[RRice25541]

Re: Eeprom dump thread!

so the problem is the code from the ELEFW505

[lotas]

Re: Eeprom dump thread!

so the problem is the code from the ELEFW505

The ELEFW505 dump is working, most likely it is not native, someone before you programmed a dump from another TV model there.

[antas]

Re: Eeprom dump thread!

Could I get a USB firmware update for:
TV: Walker
MB: 17MB110P
PB: 17IPS62
Panel: VES315WNDA-2D-N12
Thank you very much in advance

Or even dump file, please?

[RRice25541]

Re: Eeprom dump thread!

that's very possible , I have been getting a lot of tv's lately where the owners have monkeyed around with them before they bring them in for repair.
so it's very possible they tried a firmware from another unit or something..
i guess the only way to know for sure is to get an actual dump from a working unit

[lotas]

Re: Eeprom dump thread!

Or even dump file, please?

There is a Dump ( SPI Flash MX25L1605 ) from CROWN 32289T2SM (17MB110P, VES315WNDA-2D-N12), but there is no NAND dump, do you need it?

[antas]

Re: Eeprom dump thread!

There is a Dump ( SPI Flash MX25L1605 ) from CROWN 32289T2SM (17MB110P, VES315WNDA-2D-N12), but there is no NAND dump, do you need it?

Yes, please?

[lotas]

Re: Eeprom dump thread!

Ok

[antas]

Re: Eeprom dump thread!

Ok

Thank you

[antas]

Re: Eeprom dump thread!

Thank you

Unfortunately... Tv not working with this dump...
Any more ideas?

[lotas]

Re: Eeprom dump thread!

17mb110p Dumps.

[RRice25541]

Re: Eeprom dump thread!

ok so i think? i found the issue with the element, but I'm not 100% sure.
I'm hoping someone can help with some panel pinouts..

I don't think this unit has the correct panel type, maybe there's no difference, i don't know
but i think the correct panel type should be V500HJ1-PE8 and not the currently installed panel V500HJ1-XR01
I cannot find panel info on either of them

[antas]

Re: Eeprom dump thread!

17mb110p Dumps.

Thank you very much. I'll try them.

[mazloum]

Re: Eeprom dump thread!

Hi, I need dump for hyundai tv HY-LED39E9300
TP.VST59S.PB813
THANKS

[lotas]

Re: Eeprom dump thread!

Hi, I need dump for hyundai tv HY-LED39E9300
TP.VST59S.PB813
THANKS

Post your non-working dump here, I'll fix it.

[mazloum]

Re: Eeprom dump thread!

Post your non-working dump here, I'll fix it.

https://www.mediafire.com/file/s9y29...90615.BIN/file
thanks in advanced

[lotas]

Re: Eeprom dump thread!

Did you spell the TV model correctly - "HY-LED39E9300"?