Re: Eeprom dump thread!
your issue sounds like a backlight issue, not a eeprom issue
RRice25541
Member
Last Activity: 10-21-2023, 09:15 AM
Joined: 11-01-2015
Location: WV
-
Re: Eeprom dump thread!
ok so i think? i found the issue with the element, but I'm not 100% sure.
I'm hoping someone can help with some panel pinouts..
I don't think this unit has the correct panel type, maybe there's no difference, i don't know
but i think the correct panel type should be V500HJ1-PE8 and not the currently installed panel V500HJ1-XR01
I cannot find panel info on either of themLeave a comment:
-
Re: Eeprom dump thread!
that's very possible , I have been getting a lot of tv's lately where the owners have monkeyed around with them before they bring them in for repair.
so it's very possible they tried a firmware from another unit or something..
i guess the only way to know for sure is to get an actual dump from a working unitLeave a comment:
-
Re: Eeprom dump thread!
so the problem is the code from the ELEFW505Leave a comment:
-
Re: Eeprom dump thread!
If i take the code from the elefw328 and write it to the eeprom using the VGA connection from my RT809F programmer, the tv works fine except for the image being upside down.
the panel is V500HJ1-RX01Leave a comment:
-
Re: Eeprom dump thread!
nop still not working,
I can put the code from an Emerson ELEFW328 on the board and the tv will come on fine all functions work,, except that i have to go into the service mode and change LVDS_ODD to LVDS_EVEN to correct the image..
also the image is upside down..
I couldn't find a way to change the model info, actually i never saw the model number listed anywhere
couldn't find a way to flip the image in there anywhere either.
The code from the original eeprom and the corrected eeprom you uploaded will allow the...Leave a comment:
-
Re: Eeprom dump thread!
TP. MS3393. PB851 yes
here ya go hope you can help...Leave a comment:
-
Re: Eeprom dump thread!
I need an eeprom dump from an
Element ELEFW505
eeprom location UF1
Thank for any helpLeave a comment:
-
Re: Sharp Lc-50UB30U may be locked out of Service Mode and Factory Mode
update:
bringing up the firmware version screen, and then pressing menu and typing 2489 finally brought up the Factory menu.
so as near as i can tell this is what the text in the manual should say:
1. choose an input source(TV, AV IN, Component or HDMI)
[I][U]B. Not in the Setup Wizard or MMP
C. DO NOT Select EXIT while in Factory Mode,
YOU MUST select “CLEAR STORAGE” to Exit[/U][/I]
2. Press <MENU> key to show the Main Menu
3....Leave a comment:
-
Re: Sharp Lc-50UB30U may be locked out of Service Mode and Factory Mode
Hi, I've already tested the t-con and panel with my panel tester,
the MB does not have any defects the problem is in the firmware, the tv either got shut off while it was updating or had some other hiccup during the install,,
a firmware refresh might resolve this.
so here's the button numbers and what setting each one changes.
Button 0 = nothing
Button 1 = model info, brings up a list on the far right side of the screen
Button 2 = Spk on/off
Button 3 = vol 25...Last edited by RRice25541; 05-14-2022, 08:02 AM.Leave a comment:
-
Sharp Lc-50UB30U may be locked out of Service Mode and Factory Mode
So i got this tv from my neighbor, when it wasn't working right for him,, he purchased another tv and gave his old to me.
the color is all outa wack, like the settings have been corupted,
I've already done a firmware search using the wifi connection update from the tv and it didn't find any new update so it's got the most recent version.
so
The issue is i can't get into service mode or factory mode, tried resetiing it from user mode and it didn't change anything.
when i bring up the menu and type the pass codes to access either mode the menu disappears... -
Re: Eeprom dump thread!
this is the firmware download for Samsung model UN55KS8000 , it might work
[URL="https://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=US&CttFileID=6545054&CDCttType=FM&ModelType=C&ModelName=UN55KS8000FXZA&VPath=FM/202111/20211104194749430/T-JZMAKUC.zip"]https://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=US&CttFileID=6545054&CDCttType=FM&ModelType=C&ModelName=UN55KS8000FXZA&VPath=FM/202111/20211104194749430/T-JZMAKUC.zip[/URL]Re: Eeprom dump thread!Last edited by RRice25541; 05-06-2022, 06:13 PM.Leave a comment:
-
Re: Eeprom dump thread!
I need a eeprom dump for a Westinghouse LD-4695
MainBoard number 60EB41M0SA
Location U3
I also need to know what the part number is for eeprom someone removed it from this setLeave a comment:
-
Re: Eeprom dump thread!
[URL="https://av.jpn.support.panasonic.com/support/global/cs/tv/download/fw/eu_2014/down_eu_uk_cis_04.html"]https://av.jpn.support.panasonic.com/support/global/cs/tv/download/fw/eu_2014/down_eu_uk_cis_04.html[/URL]
scroll down to step 2 and step 3
Hope it helpsRe: Eeprom dump thread!
[URL="https://av.jpn.support.panasonic.com/support/global/cs/tv/download/fw/eu_2014/down_eu_uk_cis_04.html"]https://av.jpn.support.panasonic.com/support/global/cs/tv/download/fw/eu_2014/down_eu_uk_cis_04.html[/URL]...Leave a comment:
-
Re: Eeprom dump thread!
need a eeprom dump from Samsung
UN46EH6000FXZA,
BN94-05758C,
IC901 and IC904
ThanksLeave a comment:
-
Re: Vizio M50-C1/M65-C1 Service menu
ok so i realize this post is quite old but i have solution to this Vizio board swap problem and the eeprom being overwritten when the TV is turned off and back on again.
I had the same issue with a M50-C1
I didn't want to purchase an exact replacement because at the time i didn't know if the TV had other issues or not.
I did however have a D50-D1 Main board.. when i installed it as-is the screen was stretched out...so i copied the code from the M50 to the D50 Main board and then used my programmer to bit protect the code...Leave a comment:
-
Re: Eeprom dump thread!
Samsung UN70NU6900FXZA
Main Board BN94-14106C
EEPROM Dump IC501...Leave a comment:
-
Re: Eeprom dump thread!
Sorry the full parts number on the bottom side of the board is
1B1H1754
LTA460HN1-WLeave a comment:
-
Westinghouse VR-4625 EEprom Dump
Hi, Everyone, I'm in need of the EEprom dump for this model
The Model and board numbers are as follows:
Westinghouse
VR-4625
TW-64801-5046C
T.RSC8.10A 11153Leave a comment:
-
Re: Eeprom dump thread!
Insignia NS-37D20SNA14
looking for an eeprom dump or a firmware update file for this tvLeave a comment:
No activity results to display
Leave a comment: