Sony LED 65X9005A shuts down after few seconds - looking for help

[Diah]

(I wrote it above. It was just a reflection!)

Thank you for the detailed description. I will do this now but before I need to know something: what and where is the U ribbon cable??

..

[tec3000]

..

I was hoping you'd say that! Because I have just discovered something! One of the U ribbon cables is ripped. That's good news right? Likely the cause for my issue??

[Diah]

yes it is.... but still could be there another issue,, caused by smell and smoke lol

[tec3000]

Should I order the U ribbon cable right away or should I go ahead with the testing you described earlier?

[lotas]

That's good news right? Likely the cause for my issue??

+ Missing components.

[Diah]

Should I order the U ribbon cable right away or should I go ahead with the testing you described earlier?

first inspect as mentioned bu lotas.. then need the u ribbon

[Diah]

U ribbon cable should with long and pins amount calculated

[lotas]

U ribbon cable should with long and pins amount calculated

Why such complexity, we just type the number 69.65T10.T01 into a search engine and see a bunch of offers.

[Diah]

remove this defect U ribbon.. and put yours original t_CON and the new 4 ribbon in place.... you should have 3/4 screen display clear image

[tec3000]

+ Missing components.

Not sure if something is missing? I have the TV in this room and there is also nothing that fell off...

I have attached two pics. Please take a look.

[tec3000]

remove this defect U ribbon.. and put yours original t_CON and the new 4 ribbon in place.... you should have 3/4 screen display clear image

I removed the defect one and changed places with the working one. Unfortunately I don't have a clear image.

With MY t-con board I got only weird lines on the right. (Pic1)
With the t-con board from China it looks a tiny bit better Pic2.

It's baffling. So it's not just the U ribbon cable unfortunately Maybe it's the LVDS cable?

And before I ordered the t-con board and the 4 ribbon cables I DID plug and unplug the 4 ribbon cables WHILE the TV was running. That's why I'm in this mess now...

[lotas]

Not sure if something is missing? I have the TV in this room and there is also nothing that fell off...

I have attached two pics. Please take a look.

Well, isn’t there something you can’t see already? Take a magnifying glass and inspect all the planks for any broken components.

[Diah]

not good at all.... what you did man...
take out the screen.. be careful don't add more damage.. so we will have access to whole panel buffer boards to compare the other side with this damage and to know what kind of Cap installed.. and don't use your original t-con too

[tec3000]

Guys, as always you are correct. Pieces fell off. Almost on all of the buffer boards. Not only that... FCK....
I am trying to capture it on camera now. It's a challenge but I'm almost done. Pictures will follow shortly.

[tec3000]

ok, I will do 4 posts with pics of each board. Worst board is 3. But first here pics of buffer board 1:

[tec3000]

this is board 2:

[Diah]

you are lucky boy you find the missing 2 parts hold them don't lost it but keep them separated as the photos name to know loxation

[tec3000]

the worst board. Board 3. Look at the vertical white stripes:

[tec3000]

and board 4:

[Diah]

no its not worse,, the empty trace at COF ribbon cable are normal... only the parts you found keep them spectated as photos location to bring them back by soldering