samsung 58 inch plasma

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • adamp91gvm
    Badcaps Veteran
    • Jan 2014
    • 699
    • uk

    #201
    Re: samsung 58 inch plasma

    I'm looking at a y sustain board and buffers on ebay. But there off the slightly newer model would they work ?

    Comment

    • adamp91gvm
      Badcaps Veteran
      • Jan 2014
      • 699
      • uk

      #202
      Re: samsung 58 inch plasma

      http://pages.ebay.com/link/?nav=item...d=321312543211

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #203
        Re: samsung 58 inch plasma

        Did you try replacing fuse 1st? I'm not confident that ONLY your Y-main is bad.
        That Y-main will not work, it is from 2010 model and yours is 2009 model. Simply incompatible I'm afraid.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • adamp91gvm
          Badcaps Veteran
          • Jan 2014
          • 699
          • uk

          #204
          Re: samsung 58 inch plasma

          Been offered a y sustain board the same as mine for £70 does that sound right ?

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #205
            Re: samsung 58 inch plasma

            Bit pricey but if you want to pay that much go for it.... personally I'm not certain if you have an X-main fault too.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • adamp91gvm
              Badcaps Veteran
              • Jan 2014
              • 699
              • uk

              #206
              Re: samsung 58 inch plasma

              Think I need to just spend some real time on inspection on it all

              Comment

              • adamp91gvm
                Badcaps Veteran
                • Jan 2014
                • 699
                • uk

                #207
                Re: samsung 58 inch plasma

                Just seen this ill check all what he has checked too
                https://www.badcaps.net/forum/showthread.php?t=29327

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK

                  #208
                  Re: samsung 58 inch plasma

                  Worth a look, but remember B650 and A650 are so far apart in design despite there only being a year of difference, so take it with a pinch of salt.
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment

                  • adamp91gvm
                    Badcaps Veteran
                    • Jan 2014
                    • 699
                    • uk

                    #209
                    Re: samsung 58 inch plasma

                    Yer its worth a try see if I get any joy first

                    Comment

                    • adamp91gvm
                      Badcaps Veteran
                      • Jan 2014
                      • 699
                      • uk

                      #210
                      Re: samsung 58 inch plasma

                      Just thought I'd havr look at this and when the t con Board when it's connected the voltage on the x sustain is all over the place disconnect from the bottom ribbon it's stable

                      Comment

                      Related Topics

                      Collapse

                      • KYBOSH
                        Trying to Save - LG 60PH6700 60-inch plasma HDTV - Powers ON but no picture
                        by KYBOSH
                        Saved this beast from the landfill this weekend.
                        Manfactured July 2013 in Mexico.

                        I love working on plasma TVs.
                        Its been a while but I was lucky enough to find 2 this week.

                        The TV powers on and stays on but no picture. Havent checked for sound yet.
                        No bulging caps although the insides are pretty dusty and the boards are discolored from many years of high heat.
                        Will start troubleshooting tonight.

                        ...
                        10-17-2024, 01:17 PM
                      • TR103
                        Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                        by TR103
                        Hi, I have a Samsung UE50TU with:
                        - sound and backlight, but no picture
                        - when it arrived, it had a picture for a few seconds
                        - it keeps rebooting
                        - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                        - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                        - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                        - without cable between mainboard and lcd panel and with a jumpered...
                        01-22-2025, 04:12 PM
                      • joel warren
                        Looking for some help please. Samsung UN75RU800DFXZA rebooting, no picture, clicks
                        by joel warren
                        TV was working fine and then just shutdown one day. It will not turn back on. I get a backlight for a little while, then it just clicks and won't fully boot.

                        I took off the back panel and did the basic troubleshooting and it seems like it's a panel issue.

                        The backlight will stay on if I disconnect either of the ribbon cables going to the panel. I've watched this video (https://www.youtube.com/watch?v=77tymvTJDxo) and am wondering if this could be the issue, just a bad cap on the panel.

                        Any assistance is appreciated.
                        01-27-2025, 06:31 PM
                      • JJAAMM
                        SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                        by JJAAMM
                        This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                        Problem
                        TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                        07-06-2023, 06:01 AM
                      • Dodgethis
                        Samsung QN75Q6DRA, No Picture, Has BL, and Sound
                        by Dodgethis
                        Hello all,

                        This is my first post, but long term lurker on the form learning as much as possible about these TV's. I was given this TV as due to a power outage of constant On/off of power to TV. The TV originally would just click on and off (Typical Reboot Cycle). I opened the back of the TV, and troubleshooted by taking the 96 pin LVDS off one at a time to see if I had a picture on either side. I finally fixed the reboot cycle by finding the error on the left side of the screen off connector CN 1301, and the TV would stay on. Further troubleshooting led me to the driver boards where...
                        09-11-2024, 07:39 AM
                      • Loading...
                      • No more items.
                      Working...