adamp91gvm
Badcaps Veteran
Last Activity: 12-23-2024, 10:50 AM
Joined: 01-03-2014
Location: Skelmersdale
-
Hi sorry it's taken so long to reply I've been working away...
-
Tape method on the left bottom boardLeave a comment:
-
Yer I thought it was at first but if you rub it or apply pressure it does not change and depending on colour it nearly vanishes...Leave a comment:
-
Got it back on with a slight few lines...
Leave a comment:
-
samsung ue85cu8000 black mark on screen is it possible to fix
is this bleed fixable looks like its just had pressure on that corner its not a crack seems a shame
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"20231230_203334.jpg","data-attachmentid":3170581}[/ATTACH]... -
yer i have its comes up with a line across the centre...Leave a comment:
-
so ive managed to test it and filter it out to the left bottom screen board if i disconnect it ,it comes on missing a chunk of screen...Leave a comment:
-
legend ill give it a look...Leave a comment:
-
i have the same issue with mine it just power cycles did you get this fixed ?...Leave a comment:
-
anyone ever had a fix for this ive seen alot of this model on ebay doing the same thing...Leave a comment:
-
UE70TU7100KXXU cycling
hi i have the above model and its power cycling over and over , ive looked a bit into this and people are saying its the screen . it looks to be a common issue with these as there are alot on ebay anyone ever figured out a fix for this or is it a new panel ? -
Re: samsung qe55q80tat 2 flash then cycles
if i disconnect what would be the left side of the tv and boot it up i get this also...Leave a comment:
-
samsung qe55q80tat 2 flash then cycles
hi i have a Samsung as a above when you turn it on the back light comes on then flashes then the stand by light flashes 2 times the stops then flashes 2 times again . Then it cycles then does it again . i know the boards work as they are from a broken screen but i can still see the picture I've been told it could be a bad panel .Also when i disconnect the ribbon going to the main boards connected to the screen the back light comes on and stays on any help would be apricated I'm quite new to this but want to learn -
Re: Panasonic tx-49fx550b no picture
On this one with the 220 on with black to chassis it's beeping on all 4 corners but the other 220 's ain't...Leave a comment:
-
Re: Panasonic tx-49fx550b no picture
Thank you very much I'll give it a goLeave a comment:
-
Re: Panasonic tx-49fx550b no picture
Will do . What's the best way to test these apologies Im still learningLeave a comment:
-
Re: Panasonic tx-49fx550b no picture
I 100% know the av board works tested in another telleLeave a comment:
-
Re: Panasonic tx-49fx550b no picture
What would I check ?Best place to start?Leave a comment:
-
Re: Panasonic tx-49fx550b no picture
12.43v ether sideLeave a comment:
-
Re: Panasonic tx-49fx550b no picture
Anywhere I could test on here ?...Leave a comment:
No activity results to display
Leave a comment: