Microsoft Surface Pro 7 NEED BIOS. HELP!

[Udemzy]

From experience, always confirm bios is OK via uefi tool after backup, it is very important else you'll end up with bootloop when you reprogram it.
You'll get invalid checksum or any error messages at the bottom of the uefi tool.

Again, using another chip instead of the one that came with the surface pro won't allow it to touch or boot fast.

[azizi abdelhak]

plz fix old bios surface pro 7 + 1961
logo 4 sec shutdown

[SMDFlea]

plz read the rulez and post the serial number -> https://www.badcaps.net/forum/troubl...before-posting

[azizi abdelhak]

plz fix old bios surface pro 7 + 1961
logo 4 sec shutdown

Sn 026716614953

[minhdigital]

Sn 026716614953

Send to you, try

[Leinad78]

From experience, always confirm bios is OK via uefi tool after backup, it is very important else you'll end up with bootloop when you reprogram it.
You'll get invalid checksum or any error messages at the bottom of the uefi tool.

Again, using another chip instead of the one that came with the surface pro won't allow it to touch or boot fast.

Any information on that topic? I opened the file in the corresponding flash image tool and so far it looked ok. I just get the stupid boot loop and even without the battery i can´t get rid off it. Thats why i was thinking it´ll be the Bios. If you have different routine or software on hand, i´m happy to learn

[clrscr]

Please help me unlock password surface pro 7
Serial Number: 014870101453
thanks!

[volinakis]

Please help me unlock password surface pro 7
Serial Number: 014870101453
thanks!

here

[clrscr]

here

thanks!!!

[clrscr]

here

password remove but touch Screen not working

[clrscr]

here

password remove but touch Screen not working, can you help me fix again ?

[DNAGSM]

can help me to clean my bios password?
Thanks and Advance...

Model	Microsoft Surface Pro 7 Plus
Model Number	1960
Serial Number	041778104953
Board ID	MP5 W MB REV: J

[hoaca388]

can help me to clean my bios password?
Thanks and Advance...

Model	Microsoft Surface Pro 7 Plus
Model Number	1960
Serial Number	041778104953
Board ID	MP5 W MB REV: J

Unlocked

[DNAGSM]

Unlocked

no working , after pressing the power button, a logo appears and then turns off

[kjchatman]

the majority of these have a non working pch. just because the screen comes on for a few seconds doesn't mean that the cpu is active. press the power button and check if 3.3v shows up on rsmrst# and sam_pch_pwrbtn for a few seconds then check slp_s4#. the first two signals are sent to the pch then the pch sends out slp_s4#

[crowntoy99]

need bios

1866
sn 030185411753
SRGKK (Intel Core i5-1035G4)


JALAMA_ICL_MB DV 2.0B

orgnale bios missing
this bios logo and off any one good bios ples

[crowntoy99]

this bios logo an off

[domnulv]

Please help me to clean my dump. SN is 037388601953, the bios has password, i can not boot from usb to install windows. It seem it has enrolled or bitlock, but now is erased and i can not boot.

Tnx,

Cris

[SMDFlea]

post the laptop serial number.Read https://www.badcaps.net/forum/troubl...before-posting .Clean it in what way what`s the problem

[domnulv]

sorry, the machine is surface 7 pro type 1866.

Tnx,

Cris

[DNAGSM]

the majority of these have a non working pch. just because the screen comes on for a few seconds doesn't mean that the cpu is active. press the power button and check if 3.3v shows up on rsmrst# and sam_pch_pwrbtn for a few seconds then check slp_s4#. the first two signals are sent to the pch then the pch sends out slp_s4#

After changing bios ic
How to fixe this problem

[dolku]

HI Can anyone able to help me to remove password from my surface pro 7 bios bin please
I have attached the bin file down here

[SMDFlea]

RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.