Microsoft Surface Pro 7 NEED BIOS. HELP!

[SMDFlea]

bump

try this one.

[steam007]

try this one.

same(((

[SMDFlea]

same(((

try these.

[Juan__Perez]

Unlocked

It works good! all issues disappeared and there isn't touch issue, touch is ok! I really appreciate your help!

[ajbernasko]

Hello, For some reason I replaced this Pro 7 screen with a Pro 5 and it's TCON but touch stopped after restart, It updated after that touch does not work with original bad screen neither with the Pro 5's. I dont know if there is a fix for this actually.

[Bios Cracker]

Hello, For some reason I replaced this Pro 7 screen with a Pro 5 and it's TCON but touch stopped after restart, It updated after that touch does not work with original bad screen neither with the Pro 5's. I dont know if there is a fix for this actually.

Add your serial number.

[ajbernasko]

Add your serial number.

010091302753

[Bios Cracker]

Hello, For some reason I replaced this Pro 7 screen with a Pro 5 and it's TCON but touch stopped after restart, It updated after that touch does not work with original bad screen neither with the Pro 5's. I dont know if there is a fix for this actually.

Try and Update.

[ajbernasko]

I downloaded the firmware and drivers from Microsoft

[nguyendo_yen]

Help me turn on the machine and the logo interrupts for 1 second. Sn032811613253

[Bios Cracker]

Help me turn on the machine and the logo interrupts for 1 second. Sn032811613253

Try and Update.

[SMDFlea]

I downloaded the firmware and drivers from Microsoft

Did you put the Pro 7 screen back on. It won`t work with the pro 5 screen. What was wrong with the pro 7 one, no touch,cracked screen etc ? .

[ajbernasko]

I put back Pro 7 on, original screen was broken. It needed a replacement

[SMDFlea]

I put back Pro 7 on, original screen was broken. It needed a replacement

This is a bios update and firmwares extracted from the microsoft update catalog. Install from the .inf`s

[Bios Cracker]

Try and Update.

Did you tried post # 391 ???

[hepatitiz]

Hello from Germany
i have a Surface Pro 7 which only show the logo for a short time, and then restarts. It´s looping all the time.
We saved the original Bios file - maybe someone can help me with the correct original file.
best regards
Arik

[SMDFlea]

Hello from Germany
i have a Surface Pro 7 which only show the logo for a short time, and then restarts. It´s looping all the time.
We saved the original Bios file - maybe someone can help me with the correct original file.
best regards
Arik

Thread merged, post the laptop serial number.

[hepatitiz]

Ah thanks - sorry - here is the Serial: 060044795253

[Empire1]

Can someone please help me? My Surface won't start properly and keeps showing the logo for about 3 seconds before nothing else happens.
I appreciate any help in advance!
My serial number is:074858394553

I have not received any support so far and I am still waiting for help.

[sdfhdfgkdfyu]

Hello! Mine shows logo 4 seconds, then shuts off. Can you help me?

Surface Pro 7+
Model: 1960
SN: 009652921753