Microsoft Surface Pro 7 NEED BIOS. HELP!

[slvloos]

Hi. Help with the BIOS. It turns on, there is the initial Microsoft logo, and turns off. I tried to clear the ME region myself, but it didn't help. Maybe I did something wrong.
surface pro 7 1866 SN 024380402353

[userwt51]

Привет из Украины. Помогите найти bios с чистым me регионом и рабочим сенсором. Неисправна флешка bios, родного дампа нет. Работает почти любой биос из этой ветки, только долго грузится и не работает сенсор тачскрина. При очистке me региона любой копии ноутбук не запускается.

Surface pro 7 1866 core-i5 8gb 128gb
ВЕрсия платы DV:10B
S/N:015233794753
Hello from Ukraine. Help find a bios with a clean me region and a working sensor. The bios flash drive is faulty, there is no native dump. Almost any bios from this branch works, only it takes a long time to load and the touchscreen sensor does not work. When clearing the me region of any copy, the laptop does not start.

Surface pro 7 1866 core-i5 8gb 128gb
Board version DV:10B
S/N:015233794753

in English please..

[Jefferson Silva Ruilova]

What's up brothers, can you help me repair the BIOS of my

Surface Pro 7 model 1866 SN 087252494453

It has the same problem as other colleagues, it turns on, the logo appears for a few seconds and turns off, I would be very grateful if you could help me with my problem, have a nice day.

[userwt51]

Surface pro 7 1866 core-i5 8gb 128gb
Board version DV:10B
S/N:015233794753

in English please..

I apologize, but this is how Google translated it. I wrote in English later, but for some reason you deleted the message.

[bulldog uk1]

Microsoft Surface Pro 7 NEED BIOS. HELP
password locked
Microsoft Surface Pro 7 1866
sn/047745103953
Much appreciated thanks

[shiyab]

Microsoft Surface Pro 7 NEED BIOS. HELP
password locked
Microsoft Surface Pro 7 1866
sn/047745103953
Much appreciated thanks

hi try and feedback

[bulldog uk1]

hi try and feedback

It turns on, Microsoft logo, and turns off.

Thanks.

[SMDFlea]

hi try and feedback

That bios is a surface pro 5 1796

[SMDFlea]

Microsoft Surface Pro 7 NEED BIOS. HELP
password locked
Microsoft Surface Pro 7 1866
sn/047745103953
Much appreciated thanks

try

[bulldog uk1]

That bios is a surface pro 5 1796

oh s@@t i bought a job lot from ebay took chips off to rewrite thought they would be all the same ( until i read up then it was too late) got them mixed up . i will try and sort .
Thanks

[bulldog uk1]

try

will try tommoz m8 thanks

[shiyab]

It turns on, Microsoft logo, and turns off.

Thanks.

hi try

[bulldog uk1]

try

same m8
It turns on, Microsoft logo, and turns off.
thanks

[shiyab]

same m8
It turns on, Microsoft logo, and turns off.
thanks

try 352 post

[bulldog uk1]

try 352 post

same m8
It turns on, Microsoft logo, and turns off.
could be my soldering ?
thanks

[blue7512]

Hello,
i came across same problem, it turns on, Microsoft logo, and turns off.

After microsoft update this late summer it went crazy, it could not find boot to start, i could only start windows with boot menu and this way
worked until now with this bios issues, then tired of do this every time i press all butons Vol+, vol- + pow, and it died i only get logo and then turn
off

what could be the cause, me region or bios region?

i cannot get original bios from ms.

i would apreciate any help, i attach my dump

Microsoft Surface Pro 7 1866 256GB
SN:086351593853

many thanks

[rmfr1225]

Hello guys!

I hope you all doing great.

I got a Pro 7 with cracked ans smashed screen that I am trying to repair, and I have fouind that it has uefi password. I followed all the instructions I have found here and on youtube, but I had no luck.

More than requesting a clean BIOS, I am wondering if somebody can point me out how to do it by myself? What I did is use a clean BIOS i have found here in this forum and extract the Region bin file, used on my backup bios and compiled it, however now I am not even able to enter UEFI. What I did wrong?

Thank you very much!

Anyway..:

PRO 7 1866
SN: 012816394953

[fakebobnd]

Hi,
Can anyone help me?
Surface Pro 7 logo for about 3 sec and turn off.
1866 256gb 030383402653
Thank you.

[rmfr1225]

Hello guys!

I hope you all doing great.

I got a Pro 7 with cracked ans smashed screen that I am trying to repair, and I have fouind that it has uefi password. I followed all the instructions I have found here and on youtube, but I had no luck.

More than requesting a clean BIOS, I am wondering if somebody can point me out how to do it by myself? What I did is use a clean BIOS i have found here in this forum and extract the Region bin file, used on my backup bios and compiled it, however now I am not even able to enter UEFI. What I did wrong?

Thank you very much!

Anyway..:

PRO 7 1866
SN: 012816394953

Nobody?

I did try again with clean ME but no luck..

Thank you!

[Ondres]

Hi everyone,

I'm reaching out because I've run into a bit of a challenge with my Surface Pro 7 (SP7). A friend gave it to me since it's essentially dead weight for them, and they mentioned I could have it. The device is currently locked with a BIOS password, and I'm not very familiar with how to go about unlocking it.

I've already found a BIOS bin file on BadCaps, and it seems like it's been dumped and the password cleared, but I'm struggling with the process of flashing the BIOS to the device. The Surface Pro 7 is different from other devices I've worked on, and I could really use some guidance on how to properly flash this BIOS with the new bin file.

If anyone has experience with flashing BIOS on Surface devices or has some detailed steps to follow, I'd really appreciate the help! I'm thankful for any advice or assistance you can lend me, as I really want to get this working.

Thank you so much in advance!