Announcement

Collapse
No announcement yet.

LENOVO BIOS AUTO-PATCHER for Supervisor Password Removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by Stefan Steff View Post

    Write this new BIOS with ME cleared and provide feedback.
    hi Mehmet, did this worked?
    I have exactly same issue

    tried Stefan file, power light is on, keyboard back light is flashing, fan is spinning but nothing on the screen

    I've posted my issue here https://www.badcaps.net/forum/troubl...282-bios/page2

    But no help so far

    Comment


      Hello this is my Lenovo L570
      Model: 20JR-S0JA00
      SN: MP-19WJ6J

      Cam someone please patch it for me?
      Thank you very much.

      Best regards
      Attached Files

      Comment


        Originally posted by stakrzysiu View Post
        Hello this is my Lenovo L570
        Model: 20JR-S0JA00
        SN: MP-19WJ6J

        Cam someone please patch it for me?
        Thank you very much.

        Best regards
        try this

        STEP 1: Flash LENOVO PATCHED.bin
        STEP 2: Boot the machine
        STEP 3: Press ENTER or F1 /etc. to enter BIOS settings
        STEP 4: Enter any character when asked for Supervisor Password
        STEP 5: Press enter when it shows Hardware ID
        STEP 6: Press space bar 2x when asked
        STEP 7: Turn off machine
        STEP 8: Flash ORIGINAL.bin
        STEP 9: Reset BIOS settings to factory default
        Attached Files

        Comment


          Thank you very much. Worked!!!

          But now i have problem with delay. Can someone clean me for me?
          Attached Files

          Comment


          Originally posted by stakrzysiu View Post
          Thank you very much. Worked!!!

          But now i have problem with delay. Can someone clean me for me?
          Here your bin file with ME clean. Try and let us know
          Attached Files

          Comment


            Sup guys.
            Recently bought used T480s. With locked BIOS, sadly.
            After flashing (with ch341a) patched version of bios, laptop boots blank. Short lighting of keyboard, than screen is black and fan also stops and nothing happens. Then I flashed original bios, and everything back to normal. But I need access to bios settings to make some changes, so I have to find way remove this password.
            Any help, please?

            Serial Number: PC150B00
            Machine Type-Model: 20L7002HUS
            BIOS Version: N22ET76W 1.53
            Attached Files

            Comment


              Originally posted by domashspam View Post
              Sup guys.
              Recently bought used T480s. With locked BIOS, sadly.
              After flashing (with ch341a) patched version of bios, laptop boots blank. Short lighting of keyboard, than screen is black and fan also stops and nothing happens. Then I flashed original bios, and everything back to normal. But I need access to bios settings to make some changes, so I have to find way remove this password.
              Any help, please?

              Serial Number: PC150B00
              Machine Type-Model: 20L7002HUS
              BIOS Version: N22ET76W 1.53
              hi try and feedback

              STEP 1: Flash LENOVO PATCHED.bin
              STEP 2: Boot the machine
              STEP 3: Press ENTER or F1 /etc. to enter BIOS settings
              STEP 4: Enter any character when asked for Supervisor Password
              STEP 5: Press enter when it shows Hardware ID
              STEP 6: Press space bar 2x when asked
              STEP 7: Turn off machine
              STEP 8: Flash ORIGINAL.bin
              STEP 9: Reset BIOS settings to factory default
              Attached Files

              Comment


                Originally posted by shiyab View Post

                hi try and feedback

                STEP 1: Flash LENOVO PATCHED.bin
                STEP 2: Boot the machine
                STEP 3: Press ENTER or F1 /etc. to enter BIOS settings
                STEP 4: Enter any character when asked for Supervisor Password
                STEP 5: Press enter when it shows Hardware ID
                STEP 6: Press space bar 2x when asked
                STEP 7: Turn off machine
                STEP 8: Flash ORIGINAL.bin
                STEP 9: Reset BIOS settings to factory default
                This won't work. The file you provided has exact hash as bios_PATCHED.bin that I get after using auto-patcher.
                Maybe I need to follow "ME Firmware Cleaning Guide" to succeed?

                Comment


                  Originally posted by Andreasbest View Post

                  T480s stores password in EC, cannot unlock with autopatcher, only this method works https://www.badcaps.net/forum/troubl...-ec-pwd-bypass
                  It's not working any more for T480s.
                  On latest BIOS FW it asks for password even after correct shorting. I don't know how, but they closed this glitch with software updates.
                  Also I have found several users, who succeed with autopatcher. For example.
                  Unfortunately, I'm not one of them. And I don't know what to do with my T480s.

                  Comment




                    YES I TRIDE MANY YOGA 370 AND SOME YOGA 370 NOT ACCPTING PATCH FILE.
                    you have tried a lot of models already?[/QUOTE]

                    Comment


                      Originally posted by domashspam View Post

                      It's not working any more for T480s.
                      On latest BIOS FW it asks for password even after correct shorting. I don't know how, but they closed this glitch with software updates.
                      Also I have found several users, who succeed with autopatcher. For example.
                      Unfortunately, I'm not one of them. And I don't know what to do with my T480s.
                      try this file and follow steps from autopatcher
                      Attached Files
                      ----------------------------------------------------------------------------------------------------------------------------------------------------------------------
                      https://www.badcaps.net/donate/
                      ----------------------------------------------------------------------------------------------------------------------------------------------------------------------

                      Comment


                        Greetings, will the LENOVO BIOS AUTO-PATCHER work on Lenovo Legion 5 15ith6h which is equipped with 2 bios chips (an 8 and a 16)? We ran it on both dumped bins, but it saw the files as corrupt. Thank you!

                        Comment


                          Originally posted by primeaux View Post
                          Greetings, will the LENOVO BIOS AUTO-PATCHER work on Lenovo Legion 5 15ith6h which is equipped with 2 bios chips (an 8 and a 16)? We ran it on both dumped bins, but it saw the files as corrupt. Thank you!
                          In my opinion the thread should be renamed to THINKPAD BIOS AUTO-PATCHER, meaning that it only works for ThinkPad models from 4th up to 8th Generation (e.g. T440-T480 and about a couple of newer models while transitioning to the Self-Healing BIOSes). So the autopatcher won't work on the Lenovo LEGION 5.
                          Open a new thread and upload your files so that someone takes a look at them.

                          Comment


                            On the Lenovo thinkpad W541 for some reason the 8mb dump seems to not work, is this normal?

                            Comment


                              Originally posted by 3.14159 View Post
                              On the Lenovo thinkpad W541 for some reason the 8mb dump seems to not work, is this normal?
                              post two dump 8 and 4 mo eprom with serial number

                              Comment


                                Hi I have ThinkPad X1 carbon 9th gen , Product Number: 20XWS06700, Bios Version: N32ET93W 1.69, Processor: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz. Intel ME Version: 15.0, Build 2521, Hot Fix 47

                                Can someone kindly show me how on remove supervisor password please . I don't have a repair shop nearby. What is the easiest way to get a bios dump of my laptop to use Lenovo autopatcher or something to get this unlocked? Thank you

                                Comment


                                  Originally posted by Maxpower3 View Post

                                  post two dump 8 and 4 mo eprom with serial number
                                  Note that my 4mb bios got fried so they may be different dumps due to me having to flash a community bios in the replacement chip
                                  Attached Files

                                  Comment


                                    Originally posted by 3.14159 View Post

                                    Note that my 4mb bios got fried so they may be different dumps due to me having to flash a community bios in the replacement chip
                                    Does the PC turn on like that?
                                    give me the serial number, obligatory here.for help
                                    or at least the sticker below

                                    Comment


                                      Originally posted by kodox View Post
                                      thank's for making the process alot simpler @Knucklegrumble,
                                      the tool you made is working to remove supervisor password on
                                      Lenovo ThinkPad L13 with machine type 20R3 but, with some issues
                                      that later i came across with my own solution & i wanna share
                                      my solution that worked for me, because i've searched the net and
                                      no one come with the solution.

                                      after flashing patched bios to the chip i ignored message that said:
                                      2204: System configuration data is invaid
                                      and continuing the process that described on page 1, after re-flashed
                                      original bios back to the chip the error message still exist, i thought
                                      because i haven't done the "restore default" menu in bios and not attached
                                      anything to the motherboard except screen, charger and usb keyboard

                                      after restoring default in bios the error message still there and i still
                                      ignored that, put back all together, set the date & clock and leave everything
                                      on default value, exit the bios and before it boot to window the error 2204
                                      emerge and halt the boot process, ask me to press ESC to continue and i did,
                                      booted to window normaly and everything okay in windows, restart and error
                                      2204 is halting again, asking to press ESC to continue (this time it get
                                      my attention though). everytime the laptop turned on (cold boot or warm boot) always
                                      halted by error 2204.

                                      checked all serial in bios information it's all there, not invalid or missing.
                                      i did all the steps on adding or editing DMI info using tool in
                                      https://www.badcaps.net/forum/troubl...=5#post1622424
                                      everytime i try to add using the tool it's always said "Data of the same device type is already in EEPROM"
                                      searched for reference on error 2204 and found nothing related to my problem,
                                      after intense nerf fighting i decide to take a risk that would brick this Thinkpad L13,
                                      this is what i've done:
                                      1. build bootable fdd using "Lenovo Gold Key U1 Tool", i followed instructions till creation using u1.exe
                                      2. booted the fdd and choose top of the menu (forget to take picture)
                                      3. press any key after choosing the top menu
                                      4. i followed instruction coolshrimp here https://www.badcaps.net/forum/troubl...74#post1711774, i think the instruction from coolshrimp a bit different but, the main goal is the same, to empty stored data on eeprom & enter same data but with diferent "aproach" using the tool (i think), just remember to read the S/N first and take a picture of it, cause you'll need reenter those exactly the same as it was
                                      5. after initializing eeprom chosen, the process could take 40-60 seconds so be patient and don't interupt
                                      6. when done initializing it will ask to enter serial number, enter the "C0" section from the picture you take exactly the same
                                      7. after that it will generate UUID & brand name, just choose "yes"
                                      8. after done and pressing enter, it will go back to S/N utility. if not just try to explore one by one menu until you found it, in S/N utility choose "add S/N" and choose "B0" then enter serial from the picture you take exactly the same
                                      9. choose exit from sub menu until main menu choose exit (shutdown)
                                      10. done

                                      sorry for the long story, hope it helps

                                      Hello sir
                                      Thankyou for the help and well explanation
                                      really appreciate
                                      Thankyou verymuch

                                      Comment


                                        Hello there.

                                        I have my Lenovo ThinkPad P1 Gen2 with enabled and forgotten BIOS supervisor pass.
                                        Model: 20QT002CRT with BIOS N20ET65W (1.52)

                                        How to get the origial BIOS bin file? I see only .exe file on Lenovo site.
                                        Can someone suggest me hoe to reset this pass?
                                        Sorry for newbie question(

                                        Comment

                                        Working...
                                        X