Faulty Dell ST2210

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Razroid
    Member
    • Jul 2014
    • 27
    • Singapore

    #21
    Re: Faulty Dell ST2210

    Originally posted by SteveNielsen
    Yes, you can use the working tubes from the other monitor to test the inverter.
    so do I just connect the psu board to the driver board, plug it into the wall, plug the tubes from the other monitor to the board and then wait?

    Comment

    • SteveNielsen
      Retired Tech
      • Jun 2012
      • 2327
      • USA

      #22
      Re: Faulty Dell ST2210

      No, there is high voltage present. Connect the boards and tubes and to the wall outlet LAST.

      Comment

      • Razroid
        Member
        • Jul 2014
        • 27
        • Singapore

        #23
        Re: Faulty Dell ST2210

        Originally posted by SteveNielsen
        No, there is high voltage present. Connect the boards and tubes and to the wall outlet LAST.
        alright, so I just run it without connecting it to anything else? like a computer or anything so that it does not fall asleep?

        Comment

        • SteveNielsen
          Retired Tech
          • Jun 2012
          • 2327
          • USA

          #24
          Re: Faulty Dell ST2210

          I don't think that is necessary just to test the inverter. The Dell monitors I have experience with go into a self test feature check mode with the video cable disconnected so the back-light would be on. If it is connected to a computer that is OFF however, it will go directly into standby and no back-light.

          Comment

          • Razroid
            Member
            • Jul 2014
            • 27
            • Singapore

            #25
            Re: Faulty Dell ST2210

            Originally posted by SteveNielsen
            I don't think that is necessary just to test the inverter. The Dell monitors I have experience with go into a self test feature check mode with the video cable disconnected so the back-light would be on. If it is connected to a computer that is OFF however, it will go directly into standby and no back-light.
            Right, I remember seeing that self test thing (floating box). so I'll just plug it in for an hour or so and hope for the best

            Comment

            • Razroid
              Member
              • Jul 2014
              • 27
              • Singapore

              #26
              Re: Faulty Dell ST2210

              welp, 1 hour has passed and the backlight from my old monitor is still on (damn, this thing is bright) so I guess I just have to order new tubes and replace them?

              Update:pulled both the tubes out but broke both of them, they are stuck in really tight ._.
              Last edited by Razroid; 07-30-2014, 02:50 PM.

              Comment

              • selldoor
                Slow Learner
                • Dec 2010
                • 7870

                #27
                Re: Faulty Dell ST2210

                Originally posted by Razroid
                what difference does swapping the plugs make?

                ._.
                A bit irrelevant now though you could still try.

                When there are only two lamps top and bottom the lamp at the top gets all the heat from the whole monitor as well as the heat from the bottom lamp and its own heat. Consequently this causes it to wear out more quickly.
                For some reason swapping the bulbs over seems to stop the protection kicking in
                so the bulbs light up.
                Please upload pictures using attachment function when ask for help on the repair
                http://www.badcaps.net/forum/showthread.php?t=39740

                Comment

                • budm
                  Badcaps Legend
                  • Feb 2010
                  • 40746
                  • USA

                  #28
                  Re: Faulty Dell ST2210

                  Are the end of the lamps blackened?
                  Never stop learning
                  Basic LCD TV and Monitor troubleshooting guides.
                  http://www.badcaps.net/forum/showthr...956#post305956

                  Voltage Regulator (LDO) testing:
                  http://www.badcaps.net/forum/showthr...999#post300999

                  Inverter testing using old CFL:
                  http://www.badcaps.net/forum/showthr...er+testing+cfl

                  Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                  http://s807.photobucket.com/user/budm/library/

                  TV Factory reset codes listing:
                  http://www.badcaps.net/forum/showthread.php?t=24809

                  Comment

                  • Razroid
                    Member
                    • Jul 2014
                    • 27
                    • Singapore

                    #29
                    Re: Faulty Dell ST2210

                    Originally posted by budm
                    Are the end of the lamps blackened?
                    little bit, yeah. About 2mm is blackened on each end.

                    Comment

                    • Razroid
                      Member
                      • Jul 2014
                      • 27
                      • Singapore

                      #30
                      Re: Faulty Dell ST2210

                      Originally posted by selldoor
                      A bit irrelevant now though you could still try.

                      When there are only two lamps top and bottom the lamp at the top gets all the heat from the whole monitor as well as the heat from the bottom lamp and its own heat. Consequently this causes it to wear out more quickly.
                      For some reason swapping the bulbs over seems to stop the protection kicking in
                      so the bulbs light up.
                      Has anybody done a monitor with fans in it before :P

                      Might be a cool mod to do. (pun intended)

                      Comment

                      • stj
                        Great Sage ι½Šε€©ε€§θ–
                        • Dec 2009
                        • 31007
                        • Albion

                        #31
                        Re: Faulty Dell ST2210

                        i have, and tv's

                        Comment

                        • Razroid
                          Member
                          • Jul 2014
                          • 27
                          • Singapore

                          #32
                          Re: Faulty Dell ST2210

                          Alright, I have ordered the tubes, will report back if it works.

                          Thanks guys! This really helped me

                          Comment

                          • Razroid
                            Member
                            • Jul 2014
                            • 27
                            • Singapore

                            #33
                            Re: Faulty Dell ST2210

                            UPDATE: got the new tubes in, top one went in fine, but I broke the bottom one when trying to squeeze it in, why is the bottom one so tight? any ideas? few more weeks before a new tube arrives

                            Comment

                            • selldoor
                              Slow Learner
                              • Dec 2010
                              • 7870

                              #34
                              Re: Faulty Dell ST2210

                              Can you get the same length in a smaller diameter - ask seller if it will be ok?
                              Please upload pictures using attachment function when ask for help on the repair
                              http://www.badcaps.net/forum/showthread.php?t=39740

                              Comment

                              • Razroid
                                Member
                                • Jul 2014
                                • 27
                                • Singapore

                                #35
                                Re: Faulty Dell ST2210

                                The one I got is an actual Dell st2210 one, with the plastic frame and all.

                                Comment

                                • Razroid
                                  Member
                                  • Jul 2014
                                  • 27
                                  • Singapore

                                  #36
                                  Re: Faulty Dell ST2210

                                  I'm back. I got the new tubes in and left it powered on (just the tubes plugged in) for 30 mins and it didnt shut down, so I reassembled everything and plugged it in to the wall, about a minute later, it shut off, any ideas?

                                  Comment

                                  • selldoor
                                    Slow Learner
                                    • Dec 2010
                                    • 7870

                                    #37
                                    Re: Faulty Dell ST2210

                                    Check all your cables.
                                    Was the bulb still tight ? maybe expanded and had nowhere to go!! so crack.
                                    Try again with you old monitor lamps.
                                    Please upload pictures using attachment function when ask for help on the repair
                                    http://www.badcaps.net/forum/showthread.php?t=39740

                                    Comment

                                    • Razroid
                                      Member
                                      • Jul 2014
                                      • 27
                                      • Singapore

                                      #38
                                      Re: Faulty Dell ST2210

                                      Originally posted by selldoor
                                      Check all your cables.
                                      Was the bulb still tight ? maybe expanded and had nowhere to go!! so crack.
                                      Try again with you old monitor lamps.
                                      yeah, it was slightly tight, but if it cracked, it won't light up right ._.

                                      Comment

                                      • budm
                                        Badcaps Legend
                                        • Feb 2010
                                        • 40746
                                        • USA

                                        #39
                                        Re: Faulty Dell ST2210

                                        "yeah, it was slightly tight, but if it cracked, it won't light up right ._" That is correct, lamp is under vacuum.
                                        Never stop learning
                                        Basic LCD TV and Monitor troubleshooting guides.
                                        http://www.badcaps.net/forum/showthr...956#post305956

                                        Voltage Regulator (LDO) testing:
                                        http://www.badcaps.net/forum/showthr...999#post300999

                                        Inverter testing using old CFL:
                                        http://www.badcaps.net/forum/showthr...er+testing+cfl

                                        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                                        http://s807.photobucket.com/user/budm/library/

                                        TV Factory reset codes listing:
                                        http://www.badcaps.net/forum/showthread.php?t=24809

                                        Comment

                                        • Razroid
                                          Member
                                          • Jul 2014
                                          • 27
                                          • Singapore

                                          #40
                                          Re: Faulty Dell ST2210

                                          soooooo any ideas? I spent so much time and money on this display already :/

                                          Comment

                                          Related Topics

                                          Collapse

                                          • Bowline
                                            Dell E6400 PT434 type Battery Charging Stuck at 1%. Battery Pinouts?
                                            by Bowline
                                            My question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?

                                            Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?

                                            My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
                                            The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
                                            I have tried multiple different Dell power adapters. My Dell...
                                            06-11-2025, 10:13 AM
                                          • Borse2008
                                            Seeking Advice: Repairing Dell U3425WE Monitor with Faulty USB-C/Thunderbolt Ports
                                            by Borse2008
                                            Hi everyone,

                                            Looking for some advice or opinions on what to do with a monitor issue I’ve run into. Apologies in advance is this crossovers a few forum categories.

                                            I have a Dell U3425WE, which I've recently replaced with another model. That said, the original unit is still fully functional in terms of the display β€” it works perfectly over HDMI and DisplayPort. However, the USB-C and Thunderbolt 4 ports have stopped functioning correctly. The Issue:
                                            • The 90W Thunderbolt 4 port (circled in the photo) no longer charges or powers any device, including laptops or MacBooks.
                                            • There’s
                                            ...
                                            07-15-2025, 04:55 AM
                                          • diamon
                                            Looking for Dell Latitude 5520 / 5530 / 5540 RJ45 network connector replacement
                                            by diamon
                                            I have a Dell Latitude 5530 with a damaged RJ45 network connector. See the attached pictures.

                                            Have already searched on Farnell / Aliexpress / Ebay and had contact with several suppliers on Aliexpress and Ebay, but they cannot deliver this connector.
                                            Is there someone inside the EU, who has these connector(s) or perhaps defective motherboard(s) for these laptop models I have mentioned in the topic title.

                                            Pictures of these boards:
                                            Dell Latitude 5520 https://www.ebay.com/itm/256052956663
                                            Dell Latitude 5530 https://www.ebay.com/itm/125844181534
                                            Dell...
                                            02-28-2024, 12:51 PM
                                          • OntarioTL
                                            Dell 5410 greyed out BT
                                            by OntarioTL
                                            Well I've learned something new today. Of all the Dell laptops I've come across I have never seen bluetooth greyed out, and only to learn this is during the build from Dell factory. I've tried to pull the original BIOS and fix with another dell with the same issue on the forums, however the original was not recovered from the forum upgrade so I cannot do a comparison to attempt the fix on my own.

                                            If someone could help me out with this unit and I'll try the next one as so far I have 2 on my desk with this issue. Thanks in advance!

                                            Dell Lattitude 5410
                                            Service Tag...
                                            07-25-2025, 01:28 PM
                                          • lalle-
                                            Dell G5 SE 5505 - "Invalid memory installed" after BIOS update.
                                            by lalle-
                                            Hello!

                                            I have a problem with a Dell G5 SE 5505 laptop that I hope someone can give me a few pointers on.
                                            [OK, it's not really a laptop, I'm running the motherboard on my desktop with only cooling, RAM and an M2 drive attached.]
                                            I had some performance issues, so I decided to update my BIOS from 1.7.0 to the latest version, 1.20.0.
                                            The computer restarted and the update dit not want to continue without a battery connected, even though I used dell's method of bypassing this requirement.
                                            I tried updating to a custom BIOS from Reddit user Satori_Nori https://www...
                                            08-11-2024, 02:01 PM
                                          • Loading...
                                          • No more items.
                                          Working...