Re: Hotpoint FFA47X Fridge Freezer
Underside of circuit board when installed
Underside of circuit board when installed
Attached Files
-
-
Re: Hotpoint FFA47X Fridge Freezer
So the bottom line is the board connector's pads are getting the AC based on your report but the switching power supply is not working at this point.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Hotpoint FFA47X Fridge Freezer
Hi I am new on this forrum name is raf - I have this model FFa47x fridge freezer and need to know how to get access to the main pcb and where its located. I think it maybe at the top of the front door. Please if anyone can help
thnaks
Comment
-
To be a bit more specific, I've got a 20-ish year old Liebherr that has just stopped working. This was quite a sophisticated beast for its time. It's a twin compressor model, and you set the desired temperatures of the fridge and freezer parts from a couple of little control panels above the door. It displays the actual temps on some eight segment displays there, flashing if it's working to get to where you want it. There's a control board with a microprocessor on it that read the temperature from a couple of sensors, switches the compressors on as necessary, and runs the display. There's also... -
Hi all forum members,
Few days ago, i might have forgotten to close my home fridge freezer door completely. The next day, the ice cubes and frozen meat almost melted halfway and the freezer doesn't feel cool. I shut it off, wipe dry and let it air dry for one whole day. The next day i switched on the fridge, the compressor run for a second and it shuts off(no vibration and no sound at all) only the internal freezer compartment fan is running but is not cooling even i switched on a full day.
After shut off, i dismantle the rear water pan holder and reached to the compressor wiring.... -
Have this fridge, laboratory grade unit, not working fully.
It's designed with a chilling unit at the top, on the inside, and a fan just below that. When the door is closed, the fan blows the cold air down through the fridge, and when the door opens, the fan switches off, presumably so that it doesn't blow all the cold air out.
The fan isn't switching on, so in addition to not having uniform cold throughout the fridge, the chilling tubes tend to ice up. I took the lid off the top, electronics are in the lid, and when the door is opened and closed, I can hear the relevant... -
Dear forum
My Samsung fridge died from a fault on the mainline and the transformer (https://www.hqelektronika.hu/hu/halo...-w8-da2600009k) died.
No voltage on the secondary, measuring resistance shows open circuit. I concluded a blown fuse which is deep inside the transformer, I don't think I can disassemble it to replace the fuse.
The second problem is that I cannot find an original replacement part anywhere or even If I do it's pretty expensive.
My question is: Can I replace this transformer with a generic 230V to 17V one? The output has 4... -
Hello friends
Got this laptop dell 5320 not power on , just a fast and a dim blink amber light at the power on led indicator.
motherboard south peak 13 mb 213252-1
i'm using schema and Bvd similair to this motherboard. https://www.badcaps.net/forum/troubl...-latitude-5320
i don't have a type-c meter for the moment , so i m taking the voltage using his original charger.
As i undestand from many topic here ,...04-29-2025, 06:22 AM
Comment