Announcement

Collapse
No announcement yet.

Samxon GA

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Samxon GA

    Samxon GA serie of caps is there! Hoooray!
    I finally (damn Topcat had them far sooner, damn customs and slow post in my side ) finally got these caps to test them out. So, let's check the first testing batch of very likely best electrolyte caps in the world:

    [/URL]
    Different font used...

    [/URL]
    And yes, it IS a GA

    [/URL]
    Typical bottom of testing production series

    They are ATM only 30 of them in the whole world, but if they turn out to be good, then they will start mass production. And one gotta admit that the Nichicon HZ line got owned, look, the best of these has just 6.06 miliohms! Ooooh!

    [/URL]

    Now let's see how much do they degrade in time - if more that other hi-end caps brands types, even only the HZ line come close to THAT
    Attached Files
    "It is dangerous to be right in matters on which the established authorities are wrong." - Voltaire
    "I believe that all the people who stand to profit by a war and who help provoke it should be shot on the first day it starts..." - Hemingway my config - my caps
    Tags: None
    #2
    Re: Samxon GA

    very very nice. hope they are reliable so i can use em if they come out

    Comment

      #3
      Re: Samxon GA

      I've got a few of those to experiment with as well. The results should be interesting to say the least, they spec out good on paper. I hope their real-world performance is as impressive!

      Again, my thanks to Big Pope for sending me these samples!
      <--- Badcaps.net Founder

      Badcaps.net Services:

      Motherboard Repair Services
      ----------------------------------------------
      Badcaps.net Forum Members Folding Team
      http://folding.stanford.edu/
      Team : 49813
      Join in!!
      Team Stats

      Comment

        #4
        Re: Samxon GA

        the bung is different from the GC and GD i have. i recall gsc, teapo, and ost have the same bung

        samxon please use another type/model of bung
        days are so short when you actually do something..

        Comment

          #5
          Re: Samxon GA

          From my experience, these bottom seals (bungs) are used for low-series production at Samxon. These d10 2200uF 16V Samxons GD have them as well - and no other caps from Samxon have them and since I did made some pictures for list of the Samxons for Big Pope, I have now a reasonably big pile of Samxons

          The "public" GA ones in mass productions will have normal bungs taht Samxon, Panasonic, Rubycon, Nichicon and others using
          "It is dangerous to be right in matters on which the established authorities are wrong." - Voltaire
          "I believe that all the people who stand to profit by a war and who help provoke it should be shot on the first day it starts..." - Hemingway my config - my caps

          Comment

            #6
            Re: Samxon GA

            And the final production line of GA caps are there

            As you can see, font get back to Samxons normal:
            [/URL]

            From both sides
            [/URL]

            And exactly as I said before, the testing rubber sealings are standard now:


            And so far, I can't complain - if they won't work excelently, I will not be able to type these text
            Attached Files
            "It is dangerous to be right in matters on which the established authorities are wrong." - Voltaire
            "I believe that all the people who stand to profit by a war and who help provoke it should be shot on the first day it starts..." - Hemingway my config - my caps

            Comment

              #7
              Re: Samxon GA

              Mine are holding strong as well. I have them in a Shuttle MS50S007 P4 board, folding as we speak.
              <--- Badcaps.net Founder

              Badcaps.net Services:

              Motherboard Repair Services
              ----------------------------------------------
              Badcaps.net Forum Members Folding Team
              http://folding.stanford.edu/
              Team : 49813
              Join in!!
              Team Stats

              Comment

                #8
                Re: Samxon GA

                Not too bad, they look similar to some of the Malaysian Panny FF, FJ, etc. that I've seen. Maybe Samxon is the OEM manufacturer of some of those Pannys - the font is a little grainy, and the gold/silver markings tend to smear, etc. Let's see - the proof of the pudding is in the eating. If these Samxons survive 2 years of continuous use, they can could give a serious fight to the big four Jap caps.

                Comment

                  #9
                  Re: Samxon GA

                  Originally posted by linuxguru
                  Not too bad, they look similar to some of the Malaysian Panny FF, FJ, etc. that I've seen. Maybe Samxon is the OEM manufacturer of some of those Pannys - the font is a little grainy, and the gold/silver markings tend to smear, etc. Let's see - the proof of the pudding is in the eating. If these Samxons survive 2 years of continuous use, they can could give a serious fight to the big four Jap caps.
                  Acataully, I have sold Samxon GD and GC since 2004 December, there is never have any problem from my customers tilll to now.
                  My SAMXON Capacitors Database HERE!!

                  X-CON is a new brand for SAMXON's Polymer Capacitors.

                  Comment

                    #10
                    Re: Samxon GA

                    If these Samxons survive 2 years of continuous use, they can could give a serious fight to the big four Jap caps.
                    yeah, it will be good to have another option of good caps beside jap caps. those samxon caps on my systems (netcafe) is still running nice, though it's not pass 1 year yet. well joe i have to fully test it (1.5 years) till i confident enough to recommend or buy your caps in bulk
                    days are so short when you actually do something..

                    Comment

                      #11
                      Re: Samxon GA

                      OK no laughing if this is too silly,
                      But what is a bung, and does it make a difference?

                      Comment

                        #12
                        Re: Samxon GA



                        A bunge is the rubber seal at the bottom of the caps. It probably dosen`t mather, but it is a distinguishing mark to identify counterfeit byond other marks.

                        Comment

                          #13
                          Re: Samxon GA

                          that is correct, what matters is that it is made from EPT or similar material which will not degrade and shrink with age. what design or colour it is does not really matter.
                          capacitor lab yachtmati techmati

                          Comment

                            #14
                            Re: Samxon GA

                            BUNG
                            That does sound perverted or something off Beavis and Butthead, doesn't it......
                            <--- Badcaps.net Founder

                            Badcaps.net Services:

                            Motherboard Repair Services
                            ----------------------------------------------
                            Badcaps.net Forum Members Folding Team
                            http://folding.stanford.edu/
                            Team : 49813
                            Join in!!
                            Team Stats

                            Comment

                              #15
                              Re: Samxon GA

                              Thanks Topcat,
                              I don't feel so silly anymore. It does sound pretty strange, and not in my wildest thoughts did I realize that some company may use a low quality Bungs.
                              I've learned a great deal from you all, thank you.

                              Comment

                                #16
                                Re: Samxon GA

                                So do the leads go through the bunghole?

                                Comment

                                  #17
                                  Re: Samxon GA

                                  My Bung just vented.
                                  Jim

                                  Comment

                                  Previous template Next
                                  Working...
                                  X